1. Electric Slide Table Compact Type LES Series R Type L Type D Type

2. Easier mounting Mounting from the top and bottom possible. Two types of motors prepared Step motor and servo motor Light weight Comparison between LESH16R-100 and LES16R-100 1.60kg ⇒ 1.24kg: 22% reduction LESH (High rigidity) Vertical work load increased Comparison between LESH16 and LES16 2kg ⇒ 3kg: 50% increased compact (Work piece mounting surface) (Work piece mounting surface) Comparison between LESH16D and LES16D 46mm ⇒ 40.3mm: 12% reduction Reduction of cycle time Max. acceleration and deceleration: 5,000mm/s 2 - Maximum speed: 400mm/s LES (compact) Comparison of guide cross section Addition of stroke variations LES8: 30, 50, 75st LES16: 30, 50, 75, 100st LES25: 30, 50, 75, 100, 125, 150st 1. Features Vertical speed increased Comparison between LESH25 and LES25 250mm/s ⇒ 400mm/s: 60% increased

3. Request for reducing the weight of LESH Weight reduced with compact table. Weight reduced with compact table. Request for reducing the height of LESH Height reduced with compact table. Height reduced with compact table. Request for maintaining the top mounting Top mounting facilitates easier mounting. Top mounting facilitates easier mounting. Request for adding minimum stroke and intermediate strokes to the LESH standard stroke Request for adding minimum stroke and intermediate strokes to the LESH standard stroke Minimum stroke: Addition of 30mm Minimum stroke: Addition of 30mm Intermediate strokes: Addition of 75mm and 125mm Intermediate strokes: Addition of 75mm and 125mm 2. Purpose of development

4. General industrial machinery Alignment, transfer, pushing and press-fitting of work pieces * Transfer in the Z axis is better than the existing LESH. Applicable to all transfer-related industries (CP, EP, FP, MDP) 3. Application LESH (High rigidity) LES (Compact)

5. 4. Specifications and performance

6. No.DescriptionNote 1BodyAluminum alloy 2TableStainless 3Lead screwSlide screw / special coating 4Motor 5Belt 6ScraperNBR 5. Construction (1) (1) (2)(6)(3)(5) (4) Motor: R/L type

7. No.DescriptionNote 1BodyAluminum alloy 2TableStainless 3Feeding screwSlide screw / special coating 4Motor 5Coupling 6ScraperNBR 5. Construction (2) (1) (2) (6)(3) (5) (4) Motor: D type

8. 7.How-to-Order

9. LESWHL*L* 858.535137.5 1672.547136.5 2510666.5170.5 * with 50 stroke 8. Dimensions (1) W L H Motor: R/L type

10. LESWH1H2L*L* 8323132.3214.5 164540.341.5221 256158.557240 * with 50 stroke 8. Dimensions (2) W L H1 H2 Motor: D type

11. This product cannot be used as a stopper. The controller (LEC) of the other series can be used, but the parameter values of the controller are different. If the size is changed or the controller of the other series is used, the parameters have to be changed to each product. The rail and guide block use martensitic stainless steel. Corrosion resistance is lower than the austenite stainless steel. Especially, rust may be generated in environments that allow water drops from condensation to stay on the surface. 9. Precautions

12. Vertical transfer performance is higher than the LESH. Operation range is expended with addition of compact type. The selling points are the compact size and shorter cycle time compared to competitor products. A wider range of applications is made possible by motor in-line mounting type and motor parallel mounting type. The creation of the product was based on the beliefs and experience of a pneumatic component manufacturer. (1) Handy (Easy to control and mount. Free from maintenance) (2) Downsized (3) Low noise 10. Summary