1. Multimedia Thematic Project – Part III Lesson II F-18E/F Maintenance Research Joe King University of Phoenix Designing and Producing Educational Technology 555 Debora Greenfield-Fox January 4, 2016

2. January 4, 2016January 4, 2016January 4, 2016 Designing and Producing Educational Technology 5552 Lesson Objective Each student will be able to successfully identify and complete the five required troubleshooting steps to identify and repair a failed/problem component(s).

3. January 4, 2016January 4, 2016January 4, 2016 Designing and Producing Educational Technology 5553 Troubleshooting Procedures Step 1: Confirm a deficiency exists. Step 2: Identify the problem space. Step 3: Split the problem space. Step 4: Perform a controlled fix. Step 5: Test the solution. Step 1: Confirm a deficiency exists. Step 2: Identify the problem space. Step 3: Split the problem space. Step 4: Perform a controlled fix. Step 5: Test the solution.

4. January 4, 2016January 4, 2016January 4, 2016 Designing and Producing Educational Technology 5554 Scoring Rubric Student Designed Troubleshooting Rubric 3510 Confirm that a deficiency exists Had trouble with equipment, and failed to confirm deficiency exists. Could work equipment, but had trouble confirming deficiency exists. Could use equipment properly, and confirmed deficiency exists. Identify the problem space Could not properly find the problem space Could identify aircraft system onlyProperly identified the problem space. Split the problem space Could not split the problem spaceCould locate aircraft system onlyProperly split the problem space. Perform a controlled fix Could not remove or repair failed component Could remove failed component, but could not install new component Properly performed a remove and replace of faulty component. Test the solution Unsure how to test the solutionCould run the test, but test failed.Properly tested the solution.

5. January 4, 2016January 4, 2016January 4, 2016 Designing and Producing Educational Technology 5555 Exit Survey Student Survey (Check the appropriate box) 1 Strongly Disagree 2 Disagree 3 No Opinion 4 Agree 5 Strongly Agree The physical classroom environment was satisfactory. The course registration process was easy to complete. The availability of the course was convenient for my schedule. The location of the course was convenient. The course content was applicable to my job duties. The course instructor(s) were knowledgeable of the subject. Completing this course has made me more comfortable working at Boeing.

6. January 4, 2016January 4, 2016January 4, 2016 Designing and Producing Educational Technology 5556 Questions