2. Slide 1 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz 1.Hook up Portable Computer (two cables) PC Video out (Second Monitor to side of Table – Aux Computer (Use Standard 15 pin Connection Cord) PC Video in from Back of RadioShack switch – Use Standard RCA Plug 2.Start Computer, Powerpoint, Netmeeting, PowerPoint ( Slideshow) Reset Cameras so Image Centered, Correctly Positioned Reset NetMeeting – “Always on Top”, Image Size and Position 3.Use Preview Touchscreen to toggle cameras/input to Laptop Pre-Class Checklist (1) TV VCR 1212 3434 TV out to laptop video in TV 1 2 3 4 VCR 1 2 3 4 Select 3 (Prev.) to Laptop Select 2 (Prog.) to Laptop Select 3 (Prev.) to VCR Select 2 (Prog.) for VCR Button -- Radioshack TV 3 to send Preview to Laptop (Head,Students,Remote,Elmo) Button – Radioshack VCR 3 to send Preview to VCR, 2 to send Prog. To VCR Toggle VCR 3 -> 2 -> 3 for Streaming Cue

3. Slide 2 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Pre-Class Checklist (2) 1.Verify TV to “3” (‘Preview’ to Laptop Video In) 2.Verify VCR to “3” (Laptop Composite Output to VCR) 3.Have Students Verify Camera Auto Points to Them. 4.Call ETS to Notify of Program Start 5.Turn on PLAY and RECORD on VCR Are YOU Sure It’s On? 6.Click this slide to advance to 30 Second Introduction and Conduct Class

4. Slide 3 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz BEGIN CLASS IN 30 SECONDS

5. Slide 4 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz BEGIN CLASS IN 20 SECONDS

6. Slide 5 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz BEGIN CLASS IN 10 SECONDS

7. Slide 6 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz BEGIN !!! CLICK

8. Slide 7 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Let’s Begin Welcome to Week 15 (The Ultimate) Agenda Discuss Final Exam Presentations

9. Slide 8 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Final Exam Format as Previously Described Open Book Open Note

10. Slide 9 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Presentations (1) Sequence Goodyear Steve Daino Kevin Ferguson OSU-Tulsa Mike Janitz Seagate Dennis McInerney [Break/Tape Change]

11. Slide 10 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Presentations (2) Sequence Cordell Jeff Short Videotape and Slides Shown by Instructor Tom North Chris Forth Mike Blanton

12. Slide 11 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Presentations (3) Sequence (cont.) Cordell Studio Origination Kanagaraj Coimbatore Rahul Deshpande Abhijit Hora Sheng Ma Jaskaran Singh

13. Slide 12 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz Discussion Questions As Raised by Class.

14. Slide 13 Advanced Manufacturing Systems Design IEM 5303  2000 John W. Nazemetz THE END ROLL THE CREDITS 