1. Throwin’ Caution Masking Tape Throwin’ Caution Position graphic exactly where you want it on surface using tape, make sure to tape The middle section securely 1. 2. Remove small pieces of tape holding one side, leaving the middle tape secure, peel transfer tape (opaque) and lettering from backing, cutting the backing with sharp knife, or razor blade, while assistant holds lettering away from surface Cut backing here, leave transfer tape intact Backing

2. Throwin’ Caution Press down firmly Throwin’ Caution Starting in the middle using your hand, or a squegee press the lettering against The surface, working left to right, leave the transfer tape on lettering for now 3. 4. Remove small pieces of tape holding the other side, leaving the middle tape secure, peel transfer tape (opaque) and lettering from backing, pull out remaining backing, while assistant holds lettering away from surface

3. Throwin’ Caution Press down firmly Throwin’ Caution Starting in the middle using your hand, or a squegee press the lettering against The surface, working right to left, press down firmly with plastic object 5. 6. Carefully remove transfer tape, watch so that lettering does not pull off as well, Press down firmly again with squegee. Depending on temp and surface conditions You are complete!