1. J.Byrne 20151

2. Sofa Table Course work 12/13 J.Byrne 20152

3. Sofa Table Course work 12/13 J.Byrne 20153 Q 2. Produce an orthographic drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Include eight dimensions. (5%) Q 3. Produce an Isometric drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Do not dimension. (5%) Specifications: The Top has 70mm cross banding all around with an ellipse size Major 500mm, Minor 260mm centred on the table. The ellipse is divided in 30° segments. The bottom rail is 20mm x 20mm and is flush with legs. The Top has a 15mm round moulding all around.

4. Sofa Table Course work 12/13 J.Byrne 20154 The shaped Pull Rail is detailed as below in Fig 1.

5. Draw Orthographic Each View should fit inside a box equal to overall size Each view relates to another view Draw height line and keep as dimension line using Tee square bring each height across to both drawings J.Byrne 20155

6. Draw Orthographic Put light box around ellipse Put light box around quadrant J.Byrne 20156

7. Draw isometric box overall size of Table 1040mm x 500mm x 500mm at the correct scale J.Byrne 20157

8. Divide quadrant into equal lines Divide quarter of circle into 5mm spaces Divide quarter of ellipse into 5mm spaces J.Byrne 20158

9. Repeat steps on isometric Number each division and take measurements from plan and mark off on isometric J.Byrne 20159

10. Complete drawing Draw in leg frame taking all measurements from elevation and end view J.Byrne 201510

11. Sofa Table Course work 12/13 J.Byrne 201511

12. Sofa Table Course work 12/13 Q 2. Produce an orthographic drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Include eight dimensions. (5%) Q 3. Produce an Isometric drawing of the Sofa Table shown in the drawing provided at a scale of 1:5. Do not dimension. (5%) Specifications: The Top has 70mm cross banding all around with an ellipse size Major 500mm, Minor 260mm centred on the table. The ellipse is divided in 30° segments. Fig 2 The bottom rail is 20mm x 20mm and is flush with legs. The Top has a 15mm round moulding all around. The shaped Pull Rail is detailed as below in Fig 1 J.Byrne 201512