1. SPECIAL INJECTION MOLDING COINJECTION MOLDING GAS ASSISTED INJECTION MOLDING REACTION INJECTION MOLDING   

2. COINJECTION MOLDING TWO OR MORE PLASTICS ARE “LAMINATED” TOGETHER THEY MUST BE COMPATIBLE TO PROVIDE PROPER ADHESION MELTING AT APPROX. SAME TEMPERATURE SPECIAL MOLD DESIGN IS NORMALLY REQUIRED

5. NEW TECHNOLOGY OF INJECTION

7. ROTATIONAL MOLDING UPLIGHTER USED FOR ROAD CONSTRUCTION FUEL TANK

8. GAS ASSISTED INJECTION MOLDING GAS ASSISTED INJECTION MOLDING INTERNAL EXTERNAL

9. WATER INJECTION MOLDING(WIM) WATER INJECTION MOULDING(WIM)NEWMETHODS OF USING WATER INSTEAD OF GAS TO FURTHER REDUCE TIME CYCLES OF THICK SECTION TUBULAR PRODUCTS.

10. STRETCH BLOW MOLDING NOTE: IT IS SOMETIME CALLED INJECTION BLOW MOLDING

11. STRETCH BLOW MOLDING NOTE: IT IS SOMETIME CALLED INJECTION BLOW MOLDING

12. METAL INSERT MOLDING PROCESS METAL INSERT MOLDING PROCESS