Presentation is loading. Please wait.

Presentation is loading. Please wait.

The Analysis of Convective Storms. Thermodynamic Diagrams There are three desirable characteristics of atmospheric thermodynamic diagrams: The area enclosed.

Similar presentations


Presentation on theme: "The Analysis of Convective Storms. Thermodynamic Diagrams There are three desirable characteristics of atmospheric thermodynamic diagrams: The area enclosed."— Presentation transcript:

1 The Analysis of Convective Storms

2 Thermodynamic Diagrams There are three desirable characteristics of atmospheric thermodynamic diagrams: The area enclosed by any cyclic process should be proportional to energy or work. The more straight lines the better. The angle between isotherms and dry adiabats should be as large as possible.

3 Emagram—Abscissa is T, ordinate is proportional to ln p. (From energy/mass). Tephigram—Abscissa is T, ordinate is logarithm of potential temperature, sometimes diagram is rotated (From T-phi) Stuve—Abscissa is T, ordinate is Area is not proportional to energy. Skew T-ln p—Similar to emagram, but temperature lines are skewed to increase the angle with dry adiabats.

4 Convection Parameters Lifted Condensation Level (LCL) – level at which a parcel lifted from the surface will saturate Convective Condensation Level (CCL) – level at which a parcel from the surface heating to its convective temperature will saturate Convective Temperature – the temperature that the surface layer would need to be heated to to convect

5 Convection Parameters (cont.) Level of Free Convection (LFC) – level at which a lifted parcel becomes warmer than its surroundings, and hence buoyant. Equilibrium Level (EL) – level at which a previously buoyant parcel’s temperature again equals the environmental temperature. This is an approximate height for thunderstorm anvils.

6 Convection Parameter (cont.) Convective Inhibition (CIN) – the “negative” energy area below a parcel’s level of free convection. Convective Available Potential Energy (CAPE) – The “positive” energy area where a parcel is accelerating upward. Downdraft Convective Available Potential Energy (DCAPE) – The negative energy area where a parcel can be accelerated downward evaporative cooling.

7

8 Stability Parameters All indices are useful diagnostics but should not be used blindly Lifted index (LI) Showalter index (SI) Total totals (TT) Severe Weather Threat Index (SWEAT) Bulk Richardson Number Storm Relative Helicity

9 Miller Type I “loaded gun sounding”

10 Firing gun sounding?

11 Miller Type IV “Inverted V sounding

12 Miller Type II (tropical sounding)

13 Miller Type III Sounding

14 Thunderstorm Types Single cell (pulse)—can be strong, but no severe Multicell—can be severe, but don’t generate strong tornadoes Supercell—rotating updraft, most severe storms

15 Single Cell Thunderstorm

16 Multicell Thunderstorm

17

18 Supercell Thunderstorm

19

20 Conversion of Horizontal Vorticity to Vertical Vorticity

21 Storm Splitting

22

23 Tornado probability from Storm Prediction Center

24 Early afternoon satellite photo

25 Late afternoon satellite photo

26

27

28

29

30

31

32

33

34

35

36

37

38

39


Download ppt "The Analysis of Convective Storms. Thermodynamic Diagrams There are three desirable characteristics of atmospheric thermodynamic diagrams: The area enclosed."

Similar presentations


Ads by Google