1. Task Force 3: Electrolyte leakage Last update- 19/03/2014 1

2. Scope: Issues related to electrolyte leakage (except venting) Should this task force look in to evaporative emission from leaked electrolyte ? Objective : Reply all the queries on this issue, provide justification for the requirements in GTR draft and if required propose test procedure. Organization of Task force: Scope & Objective 2

3. Prepare a list of potential risks associated with existing electrolytes => discussion completed TF members agreed to distinguish the REESS in to two categories based on the types of electrolytes Aqueous electrolyte Non-aqueous electrolyte TF member agreed to distinguish in-use and post-crash requirements The discussions will be in two steps: first complete the discussion on REESS based on aqueous electrolytes (by end March) => discussion completed and then discuss the particularities of REESS with non-aqueous electrolytes. => still under discussion Approach : 3

4. 4 Non-aqueous electrolytes : JRC experiment Objective: Evaluation of volume of free electrolyte in various cell types Methodology: Sample was discharged as recommended by the manufacturer and then casing was scored/cut/drilled depending on the cell form Details available from UNECE website – EVSTF-02-17e.pdf Type of cell used: 4 different type of cells used : 18650 cell, Pouch type, Prismatic cell (type I &type II) Observations: Amount of free liquid electrolyte Evaporation of solvent after 30 minutes and 60 minutes Conclusion Still under discussion in the TF3

5. Conclusion and future work Contribution of TF3 so far: New definitions : types of electrolytes (aqueous and non-aqueous) Clarification on liquid leakage detection for aqueous electrolyte batteries New requirement (post-crash): For non-aqueous electrolytes no liquid leakage inside and outside the vehicle (instead of 7%) Experiment on ‘non-aqueous electrolytes -single cell' performed by JRC Future work : Discussions on risk associated with non-aqueous electrolytes => further discussion on JRC experimental results => 3 audio and a F2F meeting will be planed before the next GTR-EVS meeting Observation period (30 minutes) or 60 minutes) => under discussion Propose final text for agreed topics Required time: June 2015 (tentative)

6. Annex

7. Electrolyte Leakage: Issues raised during last EVS meeting 7  Three category of questions 1.Leakage detection: How to distinguish leakage? What is an appropriate coating? 2.Leakage (spillage) amount measurement : How is leakage measured? How to quantify electrolyte leakage amount (7 % volume or 5 litters)? How to differentiate ‘electrolyte leakage’ from ‘coolant’? How to measure the electrolyte vapor (in case required to)? Electrolyte leakage currently defined as liquid leakage. This poses possible difficulty for batteries using volatile electrolytes (e.g. Li-ion). How is liquid electrolyte leakage measured and distinguished from electrolyte lost due to vapors or evaporation of spilled electrolyte? 3.Venting gas: How to differentiate smoke from combustion with electrolyte vapors at venting, for example in the thermal cycling test?

8. Acceptance criteria in present GTR draft : 8 Test itemLeakageRuptureFireExplosionIsolation Resistance Retention Vibration√√√√√- Thermal shock√√√√√- Fire resistance---√-- External short circuit√√√√√- Over discharge√√√√√- Over charge√√√√√- Mechanical shock√√√√√√ Mechanical integrity√√√√√√ Post-crash Vehicle√√√√√√ The fire test does not require leakage criteria and hence out of scope of this TF The ‘flammability aspect’ and the ‘electric shock aspect’ of electrolyte is already covered in the GTR draft Hence the objective of the task force is to look in to the chemical risk (corrosive & toxic nature of electrolytes)

9. Test itemsPurpose of the testPresent Requirements Vibration-The user is supposed to continue to use the vehicle after the event. -In this case, stringent requirements should be applied -No evidence of electrolyte leakage Thermal shock and cycling External short circuit protection -The proposed test procedure is to confirm the operation of protective function. -In this case, stringent requirements should be applied Overcharge protection Over-discharge protection Over-temperature protection Mechanical integrity-Same as vehicle post-crash-No evidence of electrolyte leakage Mechanical shock REESS requirements for whole vehicle post-crash -The user is supposed to stop using the vehicle until certain repair/maintenance is conducted once subject to the event, presuming the battery would not be re- used for any other purpose than vehicle propulsion. -In this case, the requirement relevant to the accident situation, in order to avoid additional risk to the occupants and the surrounding people, should be applied. -Until 30 min after the impact, there shall be no electrolyte leakage from the REESS into the passenger compartment -no more than 7 % by volume of the REESS electrolyte capacity spilled from the REESS to the outside of the passenger compartment. Electrolyte Leakage: Present requirement & Purpose In-use Post-crash

10. IssuePotential RiskProposed Solution 1Leakage in liquid form Flammable, Toxic, Corrosive Small amounts, order of millilitres, expected No evidence of electrolyte leakage 2Vapor from leakage Toxic / flammable gas No vapors are expected as no electrolyte leakage is allowed [under discussion ] 3Volatile gas Not expected in normal operation Venting (proposal from Japan) 4Leakage in liquid form Flammable, Toxic, Corrosive Small amounts, order of millilitres, expected For REESS based on non-aqueous electrolytes, there should not be any leakage ‘outside vehicle’ or ‘inside passenger’ compartment Visual inspection may be used for electrolyte leakage detection 5Vapor from leakage Toxic / flammable gas Under discussion Non-Aqueous Electrolytes : Issues In-use Post-crash NEW 1 Justification: 1. JRC analysis shows that 7% criteria for li-ion battery may lead to dangourouse situation. Spilling ca. 1 L of dimethyl carbonate results in a PAC-3 concentration level in a volume of vehicle +3 m-thick layer around it.