Presentation is loading. Please wait.

Presentation is loading. Please wait.

SAFETY FIRST LAST & ALWAYS Core Safety Values. Mechanical Lifting/Suspended Loads I will never place myself or others under a suspended load.

Published byFay Cox Modified over 9 years ago

Similar presentations

Presentation on theme: "SAFETY FIRST LAST & ALWAYS Core Safety Values. Mechanical Lifting/Suspended Loads I will never place myself or others under a suspended load."— Presentation transcript:

1 SAFETY FIRST LAST & ALWAYS Core Safety Values

2 Mechanical Lifting/Suspended Loads I will never place myself or others under a suspended load

3 Electrical Energy I will not work on a live electrical circuits unless authorised

4 Isolation I will always isolate wherever the chance of energy release is possible

5 Working with Hands & Hand Tools I will exercise care whenever working with my hands

6 Working at Height I will not work above 1.8m without fall arrest equipment Working at Height I will not work above 1.8m without fall arrest equipment

7 1 Working at Height I will not work above 1.8m without fall arrest equipment Working at Height I will not work above 1.8m without fall arrest equipment Manual Handling I will find a solution that prevents injury

Download ppt "SAFETY FIRST LAST & ALWAYS Core Safety Values. Mechanical Lifting/Suspended Loads I will never place myself or others under a suspended load."

Similar presentations

Safety Absolutes Green Lake

Safety Absolutes Green Lake
Work Improvement in Small Enterprises (WISE): good examples from Asia [CD-ROM] [Publications] Compilation of PowerPoint presentations on: 1) Work station.

Work Improvement in Small Enterprises (WISE): good examples from Asia [CD-ROM] [Publications] Compilation of PowerPoint presentations on: 1) Work station.
BIDMC EH&S Dept1 Lockout/Tagout Training Proper Lockout Procedure BIDMC EC 60 Policy A teaching hospital of Harvard Medical School.

BIDMC EH&S Dept1 Lockout/Tagout Training Proper Lockout Procedure BIDMC EC 60 Policy A teaching hospital of Harvard Medical School.
Section 2 Safety, Tools and Equipment, Shop Practices Unit 4 General Safety Practices.

Section 2 Safety, Tools and Equipment, Shop Practices Unit 4 General Safety Practices.
Hand and Portable Power Tools Hazard Recognition.. Inspect tools daily Tool Fits Job.

Hand and Portable Power Tools Hazard Recognition.. Inspect tools daily Tool Fits Job.
1 Caught-Between Module 4. 2Objectives After this module you should be able to – identify the most common caught-between hazards – take the necessary.

1 Caught-Between Module 4. 2Objectives After this module you should be able to – identify the most common caught-between hazards – take the necessary.
The purpose of the systematic HSE work is to ensure that problems are detected and taken care of in time before any unwanted events occur. HSE applies.

The purpose of the systematic HSE work is to ensure that problems are detected and taken care of in time before any unwanted events occur. HSE applies.
Introduction Most accidents are caused by the uncontrolled release of hazardous energy. Many of these accidents can be prevented by proper lock-out/tag-out.

Introduction Most accidents are caused by the uncontrolled release of hazardous energy. Many of these accidents can be prevented by proper lock-out/tag-out.
Workplace rules that will save your life

Workplace rules that will save your life
Ladder Safety 101 Synergy Coverage Solutions. Working with Ladders Ladders are simple tools, yet often overlooked for potential hazards. Did you know.

Ladder Safety 101 Synergy Coverage Solutions. Working with Ladders Ladders are simple tools, yet often overlooked for potential hazards. Did you know.
Lockout Tag out Training2009. Control of Hazardous Energy Policy Personal locks & keys will be issued to employees by their Safety/Training Coordinator.

Lockout Tag out Training2009. Control of Hazardous Energy Policy Personal locks & keys will be issued to employees by their Safety/Training Coordinator.
Institute Of Applied Technology ATE 1012 Grade 10 Eng. Rose Hasan.

Institute Of Applied Technology ATE 1012 Grade 10 Eng. Rose Hasan.
Safety on Call SLIPS, TRIPS & FALLS - WORKING ON & AROUND COMMERCIAL MOTOR VEHICLES.

Safety on Call SLIPS, TRIPS & FALLS - WORKING ON & AROUND COMMERCIAL MOTOR VEHICLES.
Moving, Positioning and Falls Management of People The impact of legislation on the moving and positioning of people.

Moving, Positioning and Falls Management of People The impact of legislation on the moving and positioning of people.
Electricity Conservation and Safety. Questions On average, what consumes that most energy in homes? Name some ways to conserve energy. How many people.

Electricity Conservation and Safety. Questions On average, what consumes that most energy in homes? Name some ways to conserve energy. How many people.
Next Slide Introduction to the Drill Press Created by Mr. Heck.

Next Slide Introduction to the Drill Press Created by Mr. Heck.
Basic Construction.  Prevent injuries to people  Maintain a safe environment for workers  Reduce hazards  Reduce machinery breakdowns.

Basic Construction.  Prevent injuries to people  Maintain a safe environment for workers  Reduce hazards  Reduce machinery breakdowns.
Conductors of electricity

Conductors of electricity
FALL PROTECTION IN THE WORKPLACE Trainer’s Guide

FALL PROTECTION IN THE WORKPLACE Trainer’s Guide
Copyright  Progressive Business Publications Fall Protection.

Copyright  Progressive Business Publications Fall Protection.

Similar presentations

Ads by Google