1. Introduction to ANSYS 5.7 Part 2
Training Manual
Introduction to ANSYS 5.7 Part 2

2. Training Manual Introduction to ANSYS 5.7 - Part 1
Inventory Number:
First Edition
ANSYS Release: 5.7
Published Date: January 30, 2001
Registered Trademarks:
ANSYS® is a registered trademark of SAS IP Inc.
All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers.
Disclaimer Notice:
This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non-disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement.”
Copyright © 2001 SAS IP, Inc.
Proprietary data. Unauthorized use, distribution, or duplication is prohibited.
All Rights Reserved.

3. Introduction to ANSYS 5.7 - Part 2 Table of Contents
2. Array Parameters 2-1
A. Types of Array Parameters 2-4
B. How to Define 2-7
C. Retrieving Database Information 2-12
D. Array Operations 2-14
E. Workshop 2-20
3. Coupling & Constraint Equations 3-1
A. Coupling 3-3
B. Constraint Equations 3-13
C. Workshop 3-19
4. Working with Elements 4-1
A. Element Coordinate System 4-4
B. Surface Effect Elements 4-13
C. Element Table 4-26
D. Workshop 4-42
5. Beam Modeling 5-1
A. Beam Properties 5-4
B. Beam Meshing 5-9
C. Loading 5-17
D. Workshop 5-20
6. Submodeling 6-1
A. General Procedure 6-4
B. Workshop 6-16
7. Modal Analysis 7-1
A. Procedure 7-3
B. Workshop 7-12
8. Introduction to Nonlinear Analysis 8-1
A. Basic Concepts 8-4
B. Typical Procedure 8-10
C. Workshop 8-11
9. Bonded Contact 9-1
A. Definitions 9-4
B. Typical Procedure 9-6
C. Workshop 9-14
10. Macro Basics 10-1
A. Creating a Macro 10-4
B. Macro with Arguments 10-7
C. Branching 10-10
D. Looping 10-13
E. General Guidelines 10-15
F. Workshop 10-16
January 30, 2001
Inventory #001443
TOC-3