1. Viridian Gen 7 New, from the ground up, design philosophy and concept. This advance design methodology provides the optimum balance between economy and performance. Set to deliver numerous benefits to both player and operator. Index

2. Viridian Gen 7 High Resolution Touch Screen LCD Graphics Modern Looking Cabinet with Dual LCD Screens Slimmer Cabinet Design = Smaller Footprint Dual Screen Supporting All Game Categories Enhanced Player Interface New Game Functionality Future Proof Technology Pathway Range of Standard Top Box Options Trilobe Button Design Global Brand Identifier Reduction of Hazardous Substances Regulations Index

3. Cabinet Design Ergonomic Midtrim Area Supports Sentinel III Interface Curved 3D belly Artwork Slim Design Highly Modular Concept Games Controlled Edge Lighting Recessed Chip Tray, that can be blanked to complement cabinet design Index

4. Core Technology Pentium Based Processing Ethernet, USB and Digital connectivity Digital Video on two screens simultaneously --- 1280 X 1024 Advanced graphical capability --- 16 million colors Advanced stereo sound system Enhanced storage capability with optional upgrades Smart Card Software Copy Protection Index

5. Open / Close Lower Main Door View Procedure Index S-3.2.1 The lower main door is hinged on the left hand edge. To open the lower main door, insert the lower main door key, and turn it 90° clockwise. To close and lock the lower main door. 1.Push the lower main door closed. 2.The key may be removed before or after closing the door by turning the door key 90° anticlockwise. The upper main door must be closed before the lower main door is closed

6. Remove Main Door Latches View Procedure Index To remove the Main door Latches 1.Open the lower main door and upper main door 2.Disconnect the loom to the optic connector on the cabinet latch assembly lower main door only 3.Disconnect the loom to respective switch (each doors). 4.Remove the two nuts that secure the latch assembly to the cabinet. 5.Lift the latch assembly off the mounting struds. Replacement is a reversal of the removal procedure. S-4.2.4

7. Removal Mechanical Door Switch View Procedure Index S-4.2.6 Removal of the mechanical door switch 1.Open the lower main door, and switch OFF the game. 2.Unplug the switch Loom. 3.Using a flat-blade screwdriver, prise the mechanical switch from the cabinet latch bracket. The switch is replaced by firmly pushing it back into position.

8. Switching Game On/Off View Procedure Index O-3.3 Switching game On or Off 1.Open the lower main door 2.Switch the main power switch ON or Off 3.Close and lock the lower main door.

9. Read Hard Meters View Procedure To read the electromechanical meters: Index 1.Turn audit / operation meter key switch anti-clockwise 2.Read meter through viewing window illuminated by above task. O-3.8

10. Open/Close Upper Main Door View Procedure Index O-3.2.2 The upper main door is hinged on the left hand edge. To open the upper main door: 1.Open the lower main door. 2.Open upper main door by pulling release lever on right hand side. 3.Pull the upper main door out towards you. To close the upper main door: Push the upper main door closed. The top box door must be closed before the upper main door is closed.

11. Open/Close Belly Door View Procedure Index O-3.2.4 Opening and Closing Belly Door The belly door is hinged along the bottom of the door and pivots out and down. To open the belly door: 1.Insert the belly door key and turn it 90° clockwise 2.Pull the belly door out towards you To close and lock the belly door: 1.Push the belly door closed 2.The key may be removed before or after closing the door by turning the belly door key 90° anticlockwise

12. Remove/Install Belly Door Latch Index S-4.2.4 1.Open the lower main door 2.Open the belly door 3.Remove the playbutton panel by accessing two fasteners on the back of the door and disconnecting playbutton switch assemblies from the playbutton housings 4.Remove the latch lock assembly by accessing two fasteners on the back of the door 5.Remove the latch arem by removing the pivot fastener 6.Remove the latch assembly by removing the two nuts that secure the assembly to the mid trim Replacement is reversal of the removal procedure. To remove the belly door latch: View Procedure

13. Replace Belly Door Artwork Panel Index 1.Open the belly door 2.Unlock the quarter turn, captive fastener, on the top of the molded belly door housing 3.Slide the housing forward to disconnect the hooks from the steel plate sides of the housing 4.Drop the housing down and remove it from the game Replacement is reversal of the removal procedure. To replace the belly door artwork: View Procedure View Components S-4.2.3

14. 1.Piano Hinges 2.Belly Door 3.Artwork Housing 4.Quarter Turn Fastener Index

15. Replace Belly Door Lighting Index 1.Open the belly door 2.Unlock the quarter turn, captive fastener, on the top of the molded belly door housing 3.Slide the housing forward to disconnect the hooks from the steel plate sides of the housing 4.Drop the housing down and remove it from the game 5.Remove the artwork housing and disconnect the lighting loom from the connector mounted on the lower main door 6.Close the belly door to gain access to the lighting 7.The lighting is fixed to the belly door with four clips. Open each clip and remove the lighting module To replace the belly door lighting: S-4.2.3 View Procedure View Components

16. 1.Belly Door 2.Lighting 3.Artwork Housing Index

17. Replace Belly Door Artwork View Procedure Index S-4.2.3 1.Open the belly door 2.Unlock the quarter turn, captive fastener, on the top of the molded belly door housing 3.Slide the housing forward to disconnect the hooks from the steel plate sides of the housing 4.Drop the housing down and remove it from the game 5.Spring the artwork from the upper position and then lift the artwork out of the lower retainers Replacement is reversal of the removal procedure. To replace the belly door artwork:

18. Remove Playbutton Panel View Procedure Index S-4.2.4 1.Open lower main door and turn off mains power 2.Unplug playbutton panel loom from back plane 3.Remove the two screws on the back of the lower main door that secures the playbutton panel 4.Slide playbutton panel forward so as to clear the door assembly Replacement is reversal of the removal procedure. Remove playbutton panel:

19. Change Button Label View Procedure Index 1.Place a small screwdriver against the vertical facing edge of the button and prise off the button cap. Do not use the button surround for leverage as this may cause damage to the surround 2.The button label is now exposed and may be removed 3.Place the new label between the button cap and the legend plat 4.Clip the button cap into place To change a button label: S-4.2.12

20. Remove Pay Panel View Procedure Index 1.Open the lower main door and turn off mains power 2.Remove the screw that fixes the bill bezel to the rear of the lower main door 3.Remove the screw that fixes the printer bezel to the lower main door 4.Remove the two screws on the back of the door that secure the playbutton panel. Slide the mid trim panel forward so that it clear the pay panel 5.List the module and tilt forwars so that it can be lifted off the top of the door Replacement is a reversal of the removal procedure. Pay panel consists of a molded panel that has an allowance for bezels for bill and ticket printer. To remove a pay panel without coin entry: S-4.2.12

21. Turn the game power off before removing PCBs from the logic cage Remove Carrier Board 1.Open the lower main door and switch OFF the game 2.Open the logic cage door 3.Standard Electro Static Discharge (ESD) prevention procedures should be followed when handling PCBAs 4.Lever the PCBA out of the runners using the board extractors, and withdraw the board from the logic cage 5.The PCBA should be placed in an antistatic bag immediately To remove the carrier board: S-11.3.1 View Components View Procedure Index When handling electrostatic sensitive devices (ESDs) such as PCBs, take care to avoid physical contact with components. Do not place ESDs on metal surfaces. PCBs should be handled by their edges. Care must be taken to avoid flexing the PCB, as this may lead to physical damage. You must place a fault tag on any faulty boards

22. 1.Logic Cage 2.Backplane Board 3.Logic Cage Door Hinge 4.Cage Jurisdiction specific Comms 5.Hard Disk (future option) 6.Carrier Board 7.COM Express 8.Video Board Index View Backplane

24. Logic Cage Assembly View Procedure Index 1.Remove the logic cage as previously described 2.The backplane board mounting pracket assembly is removed by removing the four screws securing the assembly to the logic cage 3.The fan unit (if fitted) is removed by removing the screws securing it 4.The PCB guides are removed by pulling them from their location holes Assembly is a reversal of the disassembly procedure To disassemble the logic cage: S-4.2.9

25. Remove/Install Logic Cage Index 1.Open the lower main door and turn off mains power 2.Remove the security seal, if fitted 3.Open the logic cage door – the door flips up 4.Carefully lever the PCBAs out using the extractors and immediately placed into ant- static bags. 5.Disconnect all of the looms from the backplane board. Make sure the connectors are labeled to facilitate replacement 6.Remove the one fastener inside the logic cage attaching the logic cage to the cabinet shelf at the front 7.Gently pull the logic cage from the game. The tabs at the back of the cage will disengage from the cabinet shelf 8.Remove the logic cage and backplane board from the game Replacement is a reversal of the removal procedure To remove the logic cage and backplane board: S-4.2.9 When handling electrostatic sensitive devices (ESDs) such as PCBs, take care to avoid physical contact with components. Do not place ESDs on metal surfaces. PCBs should be handled by their edges. Care must be taken to avoid flexing the PCB, as this may lead to physical damage. View Procedure

26. Remove Top Box LCD Screen View Procedure Index 1.Remove the top box door 2.Remove the two transit screws if fitted 3.Release spring operated plunger on the lower left hand side of the LCD 4.Tilt the LCD far enough to disconnect all cables 5.Tilt the LCD far enough to access, on the left hand side, the screw that secures the stay to the LCD. Remove the screw 6.Disengage the right hand side hinge pin from its supporting slot by tilting the LCD 7.Side the LCD to the right to allow the left hand side pin to disengage from its mounting hole and remove the LCD from the machine Replacement is a reversal of the removal procedure To remove casino top box LCD screen: S-4.4.1

27. Remove Top Box Lighting 1.Top Box Door 2.Top Box Artwork 3.Lighting Module Index 1.Remove top box door as previously described 2.Disconnect the lighting loom from where it is mounted on the top box reflector 3.The lighting is fixed with four clips. Open each clip and remove the lighting module Replacement is a reversal of the removal procedure To remove casino top box lighting: S-4.4.1

28. Topper 1.CCFL C old C athode F luorescent L amp 2.LED Board (4 off) 3.Fascia 4.Artwork a)Remove top box door as previously described b)Pull fascia release lever c)Lift fascia from bottom to remove Index

29. Tower Light 1.Up to Four Levels Dip Switch Selectable 2.Moded Plastic Color Strips 3.All LED Lamps 4.Easy Serviceable Bottom View More Information Index

30. Tower Light Information Use dip switches as diagnostic aid. Assy clamp Light Tower Chassis Light Tower Base Light Tower MK7i Light Tower Board Cover Lens Light Tower Cap Top Light Tower Screw

31. PMM 1.Disconnect power to the venue Head System communications interface 2.Open lower main door, and switch OFF game power 3.Open upper main door 4.Lift off the top box door 5.Disconnect the looms from the Player Marketing Module to the communications interface 6.The fascia of the Player Marketing Module may now be removed by removing the four holding screws 7.The other components of the PMM may be accessed by releasing the screw holding the hinged PMM housing in place and pivoting the Housing forward Replacement is a reversal of the removal procedure Removal procedure for the Player Marketing Module S-4.3.3 View Procedure View Components Index

32. 1.Speaker (1 each side) 2.Hinged PMM Housing 3.PMM Fascia 4.Top Box Door Index

33. Remove/Replace Main LCD Screen Index 1.Open the lower main door, and switch OFF the game 2.Open the upper main door 3.Disconnect video and power cables from the LCD mounted on the upper main door 4.Unscrew the screen’s monitor mask – two clips at the top of the screen and two at the bottom 5.Undo the four screws holding the LCD screen to the door frame 6.Remove the LCD Replacement is a reversal of the removal procedure Removal and Replacement Procedures S-10.2.3

34. Install/Removal Upper Main Door Index S-4.2.1 1.Open lower main door then upper main door 2.Switch off mains power 3.Disconnect video cables from the LCD mounted on the upper main door 4.Remove the top box door 5.Remove the earth braid that bridges the door and the cabinet at a hinge position 6.Remove the gas shock at the ball connection on the door by utilising a small flat blade screwdriver to prise off the spring clip that retains the ball in the gas shock socket 7.Lift off the upper main door Replacement is a reversal of the removal procedure Removal and Replacement of Upper Main Door View Procedure

35. Install/Remove Lower Main Door View Procedure Index S-4.2.2 1.Open lower main door then upper main door 2.Switch off mains power 3.Disconnect the lower main door looms from the logic cage backplane PCB and remove cable ties securing these looms to the cabinet 4.Remove lower main door gas shock by utilizing a small flat blade screwdriver to prise off the spring clip that retains the ball in the gas shock socket 5.Remove lower main door earth braid 6.Lift off lower main door Replacement is a reversal of the removal procedure Removal and Replacement of Lower Main Door

36. SPC II Board Index 1.Open the lower main door and switch OFF the game 2.Open the Logic cage door 3.Slide SPC II board assembly out allowing the mounting plate to slide along the plastic side rails 4.Disconnect power cable from the DC to DC converter board 5.Disconnect cables from SPC II board Replacement is a reversal of the removal procedure Removal and Replacement of SPC II Board Assembly A.DC to DC Converter Board B.Serial Protocol Converter II Board C.Mounting Plate A B C Assembly Components A.DC to DC Converter Board B.Serial Protocol Converter II Board C.Mounting Plate Assembly Components

37. Index Open / Close Lower Main Door Remove Main Door Latches Remove Mechanical Door Switch Switching game On / Off Read Hard Meters Open / Close Upper Main Door Open / Close Belly Door Remove / Install Belly Door Latch Replace Belly Door Artwork Panel Replace Belly Door Lighting Remove Playbutton Panel Change Button Label Remove Pay Panel Logic Cage Assembly Remove Carrier Board Remove / Install Logic Cage Remove Top Box LCD Screen Remove Top Box Lighting Topper Tower Light PMM Player Marketing Module PMM Player Marketing Module Remove / Replace Main LCD Screen Install / Replace Upper Main Door Install / Replace Lower Main Door Universal Mount for BV Printer Install Machine Locks Set chipping Audio system Replace Main Monitor Replace Belly Door Artwork Index SPC II Board Assembly