Download presentation
Presentation is loading. Please wait.
Published byKristin Banks Modified over 9 years ago
1
195Eg Ethernet Wired LAN
2
38,400,N,8,1 RJ-45 Connector (RS-232) Terminal Window (HyperTerminal, ESTeem Utility, Putty, TerrTerm, etc) Serial Port Access admin Default Username and PasswordSet IP Address for Web InterfaceView Device and System Log FilesPing Host device from Modem
3
Invalid Input will Kill Operation Requests in Manual or from Customer Support Only Experienced UsersDirect Access to All Modem Variables Modem_ID Diversity Antenna Configuration Maximum Distance Settings Specific Settings in Manual
4
Antenna in Port A Cap over Port B Single External Antenna CurrentRXAntenna Value of 0 = Both Antenna Value of 1 = Port A Value of 2 = Port B Antenna Selection in Advanced WLAN_0 **195Ed can Transmit and Receive Both Ports
5
Antenna in Port A Cap over Port B Single External Antenna CurrentRXAntenna Value of 0 = Both Antenna Value of 1 = Port A Value of 2 = Port B Antenna Selection in Advanced WLAN_0 **195Ed can Transmit and Receive Both Ports
6
Very High Gain Antennas < 21dBi Distances Greater Than 13 Miles @ 54 Mbps Factory Default Set to 10 Miles Model 195E with Dish/Panel Antennas Adjustment of Timing Value Set Maximum Range in Advanced Configuration Distance Set in Miles – set to per link distance not round trip Distances Over 10 Miles
7
Very High Gain Antennas < 21dBi Distances Greater Than 13 Miles @ 54 Mbps Factory Default Set to 10 Miles Model 195E with Dish/Panel Antennas Adjustment of Timing Value Set Maximum Range in Advanced Configuration Distance Set in Miles – set to per link distance not round trip Distances Over 10 Miles
8
Identify each modem for own purposes (i.e Main street) Manual set or use ENC Modem ID Linux based Syslog or Windows available downloads Remote Syslog Configuration Real time clock Time server configuration Set System Time
10
Dual Diversity Antenna SelectionMax Distance Settings RF Datarate Operating RatesOutput Power Levels SWR measurement 10 second transmit Enable Transmitter
13
Configure when network router is unavailable Static Route Table Spanning tree enabled/disabled Bridge Variables Configuration of multiple root bridges Redundant root bridges Redundant master locations Root Bridge
15
Select Backup from Main Menu Save to FTP Site Save to File on Computer Saving Configuration Restore Factory Defaults Restore Last Configuration Removes Any uncommitted Changes made to configuration Restore From File Restores a backup configuration file from FTP or Local File Restoring Configuration
16
Restore Factory Defaults Restore Last Configuration Removes Any uncommitted Changes made to configuration Restore From File Restores a backup configuration file from FTP or Local File Restoring Configuration
17
Images files are specific to model Updates OS to include bug fixes and new features Local or Internet FTP Site File Saved on Computer Firmware Updates Main Menu Select File for Update Select Software UpdateCan be done over the air or local
20
Frequency Hopping Spread Spectrum Unique Feature to ESTeem – requires additional Timing configuration Maximum of Three Repeater Hops WLAN MAC Address Timing Master Program WLAN MAC of upstream tier Upstream Timing Master No alternate paths Repeater Peers Same as other 195E
21
Timing Master Tier 1 Repeater Tier 2 Repeaters Tier 3 Repeater
22
Timing Master = Blank Entry or 00:00:00:00:00:00Repeater Tier 1= Enter Timing Master WLAN MACRepeater Tier 2 = Enter Upstream Repeater Tier 1Repeater Tier 3 = Enter Upstream Repeater Tier 2 Timing Master Repeater Tier 1 Repeater Tier 2 Repeater Tier 3
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.