1. DZ-1008 Relay White wire DZ-1008 Relay White wire DZ-2500 notes: -White and gray wires used only when needed. May not be used on #4 and #5 switches. -White and gray wires may be reversed depending on mainline travel through switch. -Green and yellow wires used on all mainline switches and switches where derailment is a concern. -Yard and industry switches within easy reach will be manual only. From DZ-2001 Data Driver/Z-1000 From DZ-2001 Data Driver/Z-1000 DZ-1008 Relay From DZ-2001 Data Driver/Z-1000 MASTER SWITCH #4 SWITCH #2 SWITCH #3 SWITCH Advanced RossReady #4 Double Crossover From DZ-2001 Data Driver/Z-1000 Wire “A” to “A” and “B” to “B”. Connect the outside rails together label “G” (already done if RossReady). Connect the middle diamond “Z” to center rail power.

2. DZ-1008 Relay From DZ-2001 Data Driver/Z-1000 MASTER SWITCH #4 SWITCH #2 SWITCH #3 SWITCH Advanced RossReady #4 Double Crossover

3. White wire From DZ-2001 Data Driver/Z-1000 DZ-1008 Relay Insulating Pin for spur track

4. Legacy Cmd Base CMD Base Serial Comm MANCO Signal Booster Comp/ TIU Acc DZ-2001 Data Driver Z-1000 14 VAC To DZ-2500 Switch Machines Data COMM Blue/White To TIU, ASC, etc. White wire To TIU, ASC, etc. Legacy Cmd Base DZ-2001 Data Driver CMD Base Cable 6-14191 Z-1000 14 VAC Data COMM Blue/White LCS DB9 6-81499 LCS WiFi Module 6-81325 LCS SER2 Module 6-81326 LCS PDI 1 ft cable 6-81500 To DZ-2500 Switch Machines To TIU, ASC, etc.