Presentation is loading. Please wait.

Presentation is loading. Please wait.

Move 2 racks G16-RR2-4 G16-RR2-3. G15-PP-01 CKT 7-8-10-12 G15-PP-01 CKT 8-10-12 G15-PP-01 CKT 8 - 10 G15-PP-01 CKT 8 G15-PP-01 CKT 7-8-10-12 Power Feed.

Similar presentations


Presentation on theme: "Move 2 racks G16-RR2-4 G16-RR2-3. G15-PP-01 CKT 7-8-10-12 G15-PP-01 CKT 8-10-12 G15-PP-01 CKT 8 - 10 G15-PP-01 CKT 8 G15-PP-01 CKT 7-8-10-12 Power Feed."— Presentation transcript:

1 Move 2 racks G16-RR2-4 G16-RR2-3

2 G15-PP-01 CKT 7-8-10-12 G15-PP-01 CKT 8-10-12 G15-PP-01 CKT 8 - 10 G15-PP-01 CKT 8 G15-PP-01 CKT 7-8-10-12 Power Feed

3 Remove these 2 Racks G17-RR1-1 G17-RR1-2 To make room for Corrector Racks G16-RR2-4 G16-RR2-3

4 Old 480V connections are capped off inside here

5 480 supply to the racks came from here, locked off, but still connected to DHP-BE-6

6 G17-RR1-1 Power via G15-PP-01 CKT 28 G17-RR1-2 Power via G15-PP-01 CKT 30

7

8

9

10

11 24 cables, 3 wires per cable except for quads, 5 wires per cable Use KN-T8’s for most = 20 cables x 3 wires x.31” per terminal = 18.6” Use KN-T6’s for quads = 4 cables x 5 wires x.39” per terminal = 7.8” Sums to 18.6 + 7.8 = 26.4” If KN-T6’s for all terminals = 80 wires x.39” per terminal = 31.2” Boxes found available so far: 30 x 18 x 4 36 x 24 x 8

12


Download ppt "Move 2 racks G16-RR2-4 G16-RR2-3. G15-PP-01 CKT 7-8-10-12 G15-PP-01 CKT 8-10-12 G15-PP-01 CKT 8 - 10 G15-PP-01 CKT 8 G15-PP-01 CKT 7-8-10-12 Power Feed."

Similar presentations


Ads by Google