1. High frequency solenoid valve SX10 SeriesW
Quick connection type
Screw mount type
L : 45mm
H : 37mm
W : 9mm
L : 46mm
H : 31mm
W : 9mm

2. 1. Feature
1. Quick OFF response time as 0.4ms (at 50L/min. type)
Improve performance of sorter machine.
2. Long life as 5 Billion cycles (at 50L/min. type)
Extend maintenance cycle.
3. Many variation available.
　- Flow rate : 3 types available L/min., 100L/min., 150L/min.
　- Coil wattage : 4 types available
80W(600～1,200Hz) , 40W(500～1,000Hz),
10W(250～550Hz), 4W(150～350Hz)
Customer can select most efficient solenoid valve.
4. Mounting option : 2 types available - - Quick connection and screw mounting
Quick connection makes easy installation and removal.
5. Compact design : 9mm width.
It helps customer to design machine more compact.

3. 2. Flow and response time
( Voltage : DC24V , Sup. Pressure : 0.25MPa)
Flow
(L/min.)
Max. operation frequency (Hz)
Power consumption (W)
Constant energization
Response time (ms) ON
OFF 50
1,200 80
Note 1
0.5
0.4
1,000 40
0.6
550 10
Note 2
0.9
350 4 OK
1.3
100
650
0.7
300
200
2.7
150
600
0.8
500
250
1.9
1.0
6.0
Note 1 : 80W type and 40W type can be energized continuously when energy saving circuit is prepared .
Note 2 : 10W type can be energized 1sec(Max.)

4. 3. Quick mounting type Installation Remove Push valve into manifold
Hook this side
Remove
Push lever
Keep holding lever
and Lift up valve

5. 4. Continuous energization and coil temperature
　1) Continuous energization (without energy saving driver)
　　　　　　- - - These option were added due to prevent coil burnout.
　2) Coil temperature rising
( Driving condition : DC24V, 0.25MPa, 300Hz)
10W or more type Continuous energization is not possible
4W type Continuous energization possible
40W type deg. C.
10W type deg. C.
4W type deg. C.
( ref. Competitor MHJ deg. C. )

6. 5. Driving voltage control (example of energy saving circuit)
Switching 2 voltage
High V to Low V
2) PWM control to reduce
holding power consumption
High Voltage
Power supply (DC24V)
Low voltage
Power supply (DC8 or 6V)
SW1
Solenoid valve
SW2
OFF ON
Coil voltage
DC24V
DC8 or 6V
High voltage
Power supply (DC24V)
SW1
Solenoid valve
OFF ON
Mean
voltage
DC24V
DC8 or 6V

7. Max. Operating cycle (Hz)
6. How to order
S X F A G
Lead wire (Grommet)
G : 300mm
H : 500mm
J : 1,000mm
Mounting
1: Screw mounting type
2: Quick mounting type
Flow and Max operating cycle ( at DC24V, 0.25MPa)
Symbol
Flow rate (L/min.)
Max. Operating cycle (Hz)
Power consumption (W)
Coil resistance (ohm) A 50
1,200 80
7.2 B
1,000 40
14.4 C
550 10 58 D
350 4
144 E
100
650 F G
300 H
200 J
150
600 K
500 L
250 M
Filter ( Sup. Port)
Nil : No filter
F : With filter

8. 7. Pressure and flow rate 150L type 100L type Flow rate (L/min.)
Pressure ( MPa)