1. LAB #8

2. Flywheel and Key Insert the flywheel key into the slot on the crankshaft then instert the flywheel.

3. Flywheel Cont. Install plastic flywheel fins. Make sure it is in the correct position.

4. Flywheel Cup and Nut Insert the flywheel cup. Insert the flywheel Nut. Torque to 60 FOOT pounds of torque.

5. Tighten the Flywheel Break Using a pair of pliers connect the spring from the flywheel break.

6. Before install the armature CAREFULLY connect the wire on the back of the armature. Leaving the spark plug wire intact.

7. Ignition Coil Using a 10mm socket insert the bolt holding on the armature. We will torque it and set the gap when we put the second bolt in.