1. Technician License Course Chapter 8 Lesson Module 17 – Interference, Remote & Automatic Operation, Prohibited Transmissions

2. Interference QRN or “Static” Natural interference (thunderstorms) Man-made (appliances and power lines) QRM Interference caused by other signals Can be from transmitted signals Can be created internally by a receiver 2014 Technician License Course

3. Interference Harmful Interference that is disruptive, not necessarily willful. Deal with it as best you can, try to avoid causing harmful interference. Willful Intentionally causing interference. This becomes a legal and law enforcement issue. This is rare and there are procedures to deal with this (ARRL Official Observers can help). 2014 Technician License Course

4. Preventing Interference Use common sense and courtesy Know how to operate your equipment to reduce generated and received interference No one owns a frequency; be a good neighbor and share – have a “Plan B” Recognize special operations and special circumstances 2014 Technician License Course

5. Control Point Where the control operator function is performed – not necessarily at the physical transmitter Local control: operator is at the transmitter Remote control: control point is linked to the transmitter by a control link which could be telephone, radio, or Internet Automatic control: control functions are operated by circuitry that ensures proper operation 2014 Technician License Course

6. Automatic Control Control operator is always required Responsible for proper operation Repeaters, auxiliary stations, space stations, and beacons may operate under automatic control Repeater users are responsible for their transmissions through a repeater 2014 Technician License Course

7. Prohibited Transmissions Unidentified transmissions Not giving your call sign False or deceptive signals Using someone else’s call sign False distress or emergency signals Fake calls for help Obscene or indecent speech Up to interpretation, avoid controversial subjects Music 2014 Technician License Course

8. No Commercial Communications Advertising ham radio gear is okay as long as it’s not your regular business. (Don’t advertise non-ham gear.) You may not use ham radio on behalf of your employer. Exception: teachers may use ham radio in their classrooms, clubs may employ an operator but only with restrictions on hours. 2014 Technician License Course

9. No Encrypted Transmissions Encryption means deliberately encoding information for transmission in order to hide or obscure the message. Encryption is only allowed for: Radio control Space station control 2014 Technician License Course

10. No Broadcasting Broadcasting is sending one-way transmissions to the general public: –News –Music Exceptions: –Code practice –Ham radio-related bulletins –Retransmission of space station control communications 2014 Technician License Course

11. Special Circumstances Emergencies and critical situations create special circumstances. Special events may qualify as special circumstances. Normal rules return when the situation returns to normal. 2014 Technician License Course

12. Practice Questions 2014 Technician License Course

13. A. Radio transmissions that annoy users of a repeater B. Unwanted radio transmissions that cause costly harm to radio station apparatus C. That which seriously degrades, obstructs, or repeatedly interrupts a radio communication service operating in accordance with the Radio Regulations D. Static from lightning storms FCC Rule: [97.3(a)(23)] T1A04 HRLM (8-7) Which of the following meets the FCC definition of harmful interference? 2014 Technician License Course

14. A. Citizens Radio Service B. Broadcast Service C. Land Mobile Radio Service D. Radionavigation Service FCC Rule: [97.101(d), 97.303(o)(2)] T1A06 HRLM (8-7) Which of the following services are protected from interference by amateur signals under all circumstances? 2014 Technician License Course

15. A. Only if the station interfered is expressing extreme religious or political views B. At no time C. Only during a contest D. At any time, amateurs are not protected from willful interference FCC Rule: [ 97.101(d)] T1A11 HRLM (8-8) When is willful interference to other amateur radio stations permitted? 2014 Technician License Course

16. A. During an Armed Forces Day Communications Test B. During a Memorial Day Celebration C. During an Independence Day celebration D. During a propagation test FCC Rule: [97.111(a)(5)] T1D02 HRLM (8-13) On which of the following occasions may an FCC-licensed amateur station exchange messages with a U.S. military station? 2014 Technician License Course

17. A. Only during contests B. Only when operating mobile C. Only when transmitting control commands to space stations or radio control craft D. Only when frequencies above 1280 MHz are used FCC Rule: [97.211(b), 97.215(b)] T1D03 HRLM (8-12) When is the transmission of codes or ciphers that hide the meaning of a message allowed by an amateur station? 2014 Technician License Course

18. A. When incidental to an authorized retransmission of manned spacecraft communications B. When the music produces no spurious emissions C. When the purpose is to interfere with an illegal transmission D. When the music is transmitted above 1280 MHz FCC Rule: [97.113(a)(4), 97.11(a)3(ii)] T1D04 HRLM (8-13) What is the only time an amateur station is authorized to transmit music? 2014 Technician License Course

19. A. When the equipment is normally used in an amateur station and such activity is not conducted on a regular basis B. When the asking price is $100.00 or less C. When the asking price is less than its appraised value D. When the equipment is not the personal property of either the station licensee or the control operator or their close relatives FCC Rule: [97.113(a)(3)(ii)] T1D05 HRLM (8-12) When may amateur radio operators use their stations to notify other amateurs of the availability of equipment for sale or trade? 2014 Technician License Course

20. A. The FCC maintains a list of words that are not permitted to be used on amateur frequencies B. Any such language is prohibited C. The ITU maintains a list of words that are not permitted to be used on amateur frequencies D. There is no such prohibition FCC Rule: [97.113(a)(4)] T1D06 HRLM (8-11) What, if any, are the restrictions concerning transmission of language that may be considered indecent or obscene? 2014 Technician License Course

21. A. Auxiliary, beacon, or Earth stations B. Auxiliary, repeater, or space stations C. Beacon, repeater, or space stations D. Earth, repeater, or space stations FCC Rule: [97.113(d)] T1D07 HRLM (8-13) What types of amateur stations can automatically retransmit the signals of other amateur stations? 2014 Technician License Course

22. A. When engaging in communications on behalf of their employer B. When the communication is incidental to classroom instruction at an educational institution C. When re-broadcasting weather alerts during a RACES net D. When notifying other amateur operators of the availability for sale or trade of apparatus FCC Rule: [97.113(a)(3)(iii)] T1D08 HRLM (8-12) In which of the following circumstances may the control operator of an amateur station receive compensation for operating the station? 2014 Technician License Course

23. A. Only where such communications directly relate to the immediate safety of human life or protection of property B. Only when broadcasting communications to or from the space shuttle C. Only where noncommercial programming is gathered and supplied exclusively to the National Public Radio network D. Only when using amateur repeaters linked to the Internet FCC Rule: [97.113(5)(b)] T1D09 HRLM (8-13) Under which of the following circumstances are amateur stations authorized to transmit signals related to broadcasting, program production, or news gathering, assuming no other means is available? 2014 Technician License Course

24. A. Two-way transmissions by amateur stations B. Transmission of music C. Transmission of messages directed only to amateur operators D. Transmissions intended for reception by the general public FCC Rule: [97.3(a)(10)] T1D10 HRLM (8-13) What is the meaning of the term "broadcasting" in the FCC rules for the amateur services? 2014 Technician License Course

25. A. Under no circumstances B. When transmitting code practice, information bulletins, or transmissions necessary to provide emergency communications C. At any time as long as no music is broadcast D. At any time as long as the material being broadcast did not originate from a commercial broadcast station FCC Rule: [97.111(b)(4,5,6)] T1D12 HRLM (8-13) Under which of the following circumstances may an amateur radio operator broadcast? 2014 Technician License Course

26. A. Automatic B. Remote C. Local D. Manual FCC Rule: [97.109(d)] T1E06 HRLM (8-11) Under what type of control do APRS network digipeaters operate? 2014 Technician License Course

27. A. Repeater operation B. Controlling the station over the Internet C. Using a computer or other device to automatically send CW D. Using a computer or other device to automatically identify FCC Rule: [97.3(a)(6), 97.205(d)] T1E08 HRLM (8-11) Which of the following is an example of automatic control? 2014 Technician License Course

28. A. Radio control B. Unattended control C. Automatic control D. Local control FCC Rule: [97.109(b)] T1E09 HRLM (8-10) What type of control is being used when the control operator is at the control point? 2014 Technician License Course

29. A. Repeater operation B. Operating a station over the Internet C. Controlling a model aircraft, boat or car by amateur radio D. All of these choices are correct FCC Rule: [97.3(a)(39)] T1E10 HRLM (8-10) Which of the following is an example of remote control as defined in Part 97? 2014 Technician License Course

30. A. The control operator of the originating station B. The control operator of the repeater C. The owner of the repeater D. Both the originating station and the repeater owner FCC Rule: [97.205(g)] T1F10 HRLM (8-11) Who is accountable should a repeater inadvertently retransmit communications that violate the FCC rules? 2014 Technician License Course

31. A. Microphone gain too high, causing over-deviation B. SWR too high C. Incorrect CTCSS Tone D. All of these choices are correct T2B07 HRLM (2-9) What could cause your FM signal to interfere with stations on nearby frequencies? 2014 Technician License Course

32. A. Common courtesy should prevail, but no one has absolute right to an amateur frequency B. Whoever has the strongest signal has priority on the frequency C. Whoever has been on the frequency the longest has priority on the frequency D. The station which has the weakest signal has priority on the frequency T2B08 HRLM (8-7) What action should station operators take if they discover that they are both using the same frequency, causing interference? 2014 Technician License Course

33. Technician License Course Chapter 9 Lesson Module 18 – Safety and Amateur Radio

34. Electrical Injuries Shocks and burns. Low voltages can cause enough current to create problems. Equipment today uses lower voltage than tube equipment but it can still cause burns. 2014 Technician License Course

35. Electrical Safety Avoiding contact is the most effective way of practicing electrical safety Unplug equipment before working on it Keep one hand in your pocket Make sure equipment is grounded Use power from GFCI-protected circuits 2014 Technician License Course

36. Mitigating Electrical Hazards If working on live equipment is required: Remove jewelry Avoid unintentional touching of circuitry Never bypass safety interlocks Discharge high-voltage points and components to ground Capacitors can store charge after power is off Storage batteries are dangerous when shorted 2014 Technician License Course

37. Responding to Electrical Injury REMOVE POWER! Have ON/OFF switches and circuit breakers clearly marked. Install an emergency master power switch and make sure your family knows how to use it. Call for help. Learn CPR and first aid. 2014 Technician License Course

38. Electrical Grounding and Circuit Protection Make sure your station wiring meets code Most ham equipment does not require special wiring or circuits –Use 3-wire power cords –Use circuit breakers, circuit breaker outlets, or Ground Fault Circuit Interrupter (GFCI) circuit breakers or outlets –Use proper fuse or circuit breaker size –Don’t overload single outlets or circuits 2014 Technician License Course

39. Grounding & Bonding at RF RF burns from “hot spots” at high RF voltage Do not cause serious injury at ham power level Prevent by bonding (connecting) equipment together with heavy wire or strap – braided strap not recommended at RF Prevent by keeping people away from antennas and radial or counterpoise wires Ground equipment for AC safety 2014 Technician License Course

40. Lightning Protection Ground antennas and towers to local code Use 8-ft ground rod for each tower leg Bond rods to tower leg and the other rods Ground connections should be as short as possible Use lightning arrestors on a single ground plate where cables enter the house Unplug and disconnect equipment (including telephones and computers) and feed lines if lightning is expected 2014 Technician License Course

41. RF Exposure Electromagnetic radiation (EMR) is not the same as radioactivity – much lower energy RF energy heats body tissues –Heating depends on the RF intensity and frequency. –If precautions are taken, RF exposure is minimal and not dangerous. 2014 Technician License Course

42. RF Intensity Power Density Watts per square centimeter (w/cm 2 ) Higher power density means higher RF exposure RF absorption varies with frequency because of body part size Safe exposure levels have been established by the FCC 2014 Technician License Course

43. Maximum Permissible Exposure (MPE) 2014 Technician License Course

44. RF Environment Controlled Environment. –You know where people are standing in relation to your antenna and you can do something about it. –Higher power density is allowed because you can make adjustments if needed. Uncontrolled Environment. –You have no control of people near your antenna. –Lower power density is allowed because you cannot control or adjust the exposure of people. 2014 Technician License Course

45. Duty Cycle and Duty Factor Duty cycle is the percentage of time that a transmitter is on during the evaluation period, from 0 to 100% Duty cycle = 100 x (time on / total time) Duty factor is the same as duty cycle, but given as a number from 0 to 1.0 Higher duty cycle or factor means higher average power density and exposure 2014 Technician License Course

46. Mode Duty Cycle Accounts for the different characteristics of the transmitted signal’s waveform 2014 Technician License Course

47. RF Exposure Evaluation All fixed stations must perform an exposure evaluation. Use online calculator (easiest) Model exposure with software (difficult) Measure RF power density (most difficult) At lower power levels, no evaluation is required. Varies with frequency – example: below 50 W at VHF. Re-evaluate exposure when station equipment or operating frequencies change. 2014 Technician License Course

48. Reducing RF Exposure Relocate or reorient antennas Raise the antenna Reduce antenna gain Reduce RF power output Change to a lower duty cycle mode 2014 Technician License Course

49. Mobile Safety Mobile Installations Secure all equipment Place equipment where you can operate it safely while driving Know local rules for use of communications equipment while driving May need hands-free microphone 2014 Technician License Course

50. Power Line Safety Keep antennas well away from power lines Check for power lines before installing antennas in trees Provide a minimum of 10 feet of clearance if antenna falls Never attach antennas or guy lines to utility poles or structures 2014 Technician License Course

51. Tower Work Basic tower safety –Proper clothing, hard hat and eye protection –Use a proper climbing harness, not a lineman’s belt or rock-climbing gear –Don’t climb a crank-up tower supported only by its lift cable – block and secure it first –Use a gin pole to lift heavy items –Don’t work alone – use a ground crew 2014 Technician License Course

52. Practice Questions 2014 Technician License Course

53. A. Touching both terminals with the hands can cause electrical shock B. Shorting the terminals can cause burns, fire, or an explosion C. RF emissions from the battery D. All of these choices are correct T0A01 HRLM (9-3) Which of the following is a safety hazard of a 12 voltage storage battery? 2014 Technician License Course

54. A. By heating tissue B. It disrupts the electrical functions of cells C. It causes involuntary muscle contractions D. All of these choices are correct T0A02 HRLM (9-2) How does current flowing through the body cause a health hazard? 2014 Technician License Course

55. A. Neutral B. Hot C. Safety ground D. The white wire T0A03 HRLM (9-4) What is connected to the green wire in a three-wire electrical AC plug? 2014 Technician License Course

56. A.Use three-wire cords and plugs for all AC powered equipment B.Connect all AC powered station equipment to a common safety ground C.Use a circuit protected by a ground-fault interrupter D. All of these choices are correct T0A06 HRLM (9-3) What is a good way to guard against electrical shock at your station? 2014 Technician License Course

57. A. Include a parallel bypass switch for each protector so that it can be switched out of the circuit when running high power B. Include a series switch in the ground line of each protector to prevent RF overload from inadvertently damaging the protector C. Keep the ground wires from each protector separate and connected to station ground D. Ground all of the protectors to a common plate which is in turn connected to an external ground T0A07 HRLM (9-5) Which of these precautions should be taken when installing devices for lightning protection in a coaxial cable feed line? 2014 Technician License Course

58. A. A fuse or circuit breaker in series with the AC "hot" conductor B. An AC voltmeter across the incoming power source C. An inductor in series with the AC power source D. A capacitor across the AC power source T0A08 HRLM (9-4) What safety equipment should always be included in home-built equipment that is powered from 120V AC power circuits? 2014 Technician License Course

59. A. Static electricity could damage the grounding system B. Circulating currents inside the transformer might cause damage C. The fuse might blow if you remove the cover D. You might receive an electric shock from the charged stored in large capacitors T0A11 HRLM (9-3) What kind of hazard might exist in a power supply when it is turned off and disconnected? 2014 Technician License Course

60. A. At all times except when climbing the tower B. At all times except when belted firmly to the tower C. At all times when any work is being done on the tower D. Only when the tower exceeds 30 feet in height T0B01 HRLM (9-13) When should members of a tower work team wear a hard hat and safety glasses? 2014 Technician License Course

61. A. Make sure that you wear a grounded wrist strap B. Remove all tower grounding connections C. Put on a climbing harness and safety glasses D. All of the these choices are correct T0B02 HRLM (9-13) What is a good precaution to observe before climbing an antenna tower? 2014 Technician License Course

62. A. When no electrical work is being performed B. When no mechanical work is being performed C. When the work being done is not more than 20 feet above the ground D. Never T0B03 HRLM (9-14) Under what circumstances is it safe to climb a tower without a helper or observer? 2014 Technician License Course

63. A. Wear a ground strap connected to your wrist at all times B. Insulate the base of the tower to avoid lightning strikes C. Look for and stay clear of any overhead electrical wires D. All of these choices are correct T0B04 HRLM (9-12) Which of the following is an important safety precaution to observe when putting up an antenna tower? 2014 Technician License Course

64. A. To temporarily replace guy wires B. To be used in place of a safety harness C. To lift tower sections or antennas D. To provide a temporary ground T0B05 HRLM (9-14) What is the purpose of a gin pole? 2014 Technician License Course

65. A. Half the width of your property B. The height of the power line above ground C. 1/2 wavelength at the operating frequency D. So that if the antenna falls unexpectedly, no part of it can come closer than 10 feet to the power wires T0B06 HRLM (9-12) What is the minimum safe distance from a power line to allow when installing an antenna? 2014 Technician License Course

66. A. This type of tower must never be painted B. This type of tower must never be grounded C. This type of tower must never be climbed unless it is in the fully retracted position D. All of these choices are correct T0B07 HRLM (9-14) Which of the following is an important safety rule to remember when using a crank-up tower? 2014 Technician License Course

67. A. A single four-foot ground rod, driven into the ground no more than 12 inches from the base B. A ferrite-core RF choke connected between the tower and ground C. Separate eight-foot long ground rods for each tower leg, bonded to the tower and each other D. A connection between the tower base and a cold water pipe T0B08 HRLM (9-13) What is considered to be a proper grounding method for a tower? 2014 Technician License Course

68. A. The antenna will not work properly because of induced voltages B. The utility company will charge you an extra monthly fee C. The antenna could contact high-voltage power wires D. All of these choices are correct T0B09 HRLM (9-12) Why should you avoid attaching an antenna to a utility pole? 2014 Technician License Course

69. A. Only non-insulated wire must be used B. Wires must be carefully routed with precise right-angle bends C. Sharp bends must be avoided D. Common grounds must be avoided T0B10 HRLM (9-4) Which of the following is true concerning grounding conductors used for lightning protection? 2014 Technician License Course

70. A. FCC Part 97 Rules B. Local electrical codes C. FAA tower lighting regulations D. Underwriters Laboratories' recommended practices T0B11 HRLM (9-4) Which of the following establishes grounding requirements for an amateur radio tower or antenna? 2014 Technician License Course

71. A. Put a loop in the ground connection to prevent water damage to the ground system B. Make sure that all bends in the ground wires are clean, right angle bends C. Ensure that connections are short and direct D. All of these choices are correct T0B12 HRLM (9-4) Which of the following is good practice when installing ground wires on a tower for lightning protection? 2014 Technician License Course

72. A. Gamma radiation B. Ionizing radiation C. Alpha radiation D. Non-ionizing radiation T0C01 HRLM (9-5) What type of radiation are VHF and UHF radio signals? 2014 Technician License Course

73. A. 3.5 MHz B. 50 MHz C. 440 MHz D. 1296 MHz T0C02 HRLM (9-7) Which of the following frequencies has the lowest Maximum Permissible Exposure limit? 2014 Technician License Course

74. A. 1500 watts PEP transmitter output B. 1 watt forward power C. 50 watts PEP at the antenna D. 50 watts PEP reflected power T0C03 HRLM (9-9) What is the maximum power level that an amateur radio station may use at VHF frequencies before an RF exposure evaluation is required? 2014 Technician License Course

75. A. Frequency and power level of the RF field B. Distance from the antenna to a person C. Radiation pattern of the antenna D. All of these choices are correct T0C04 HRLM (9-9) What factors affect the RF exposure of people near an amateur station antenna? 2014 Technician License Course

76. A. Lower frequency RF fields have more energy than higher frequency fields B. Lower frequency RF fields do not penetrate the human body C. Higher frequency RF fields are transient in nature D. The human body absorbs more RF energy at some frequencies than at others T0C05 HRLM (9-6) Why do exposure limits vary with frequency? 2014 Technician License Course

77. A. By calculation based on FCC OET Bulletin 65 B. By calculation based on computer modeling C. By measurement of field strength using calibrated equipment D. All of these choices are correct T0C06 HRLM (9-9) Which of the following is an acceptable method to determine that your station complies with FCC RF exposure regulations? 2014 Technician License Course

78. A. Touching the antenna could cause television interference B. They might receive a painful RF burn C. They might develop radiation poisoning D. All of these choices are correct T0C07 HRLM (9-6) What could happen if a person accidentally touched your antenna while you were transmitting? 2014 Technician License Course

79. A. Relocate antennas B. Relocate the transmitter C. Increase the duty cycle D. All of these choices are correct T0C08 HRLM (9-10) Which of the following actions might amateur operators take to prevent exposure to RF radiation in excess of FCC-supplied limits? 2014 Technician License Course

80. A. By informing the FCC of any changes made in your station B. By re-evaluating the station whenever an item of equipment is changed C. By making sure your antennas have low SWR D. All of these choices are correct T0C09 HRLM (9-9) How can you make sure your station stays in compliance with RF safety regulations? 2014 Technician License Course

81. A. It affects the average exposure of people to radiation B. It affects the peak exposure of people to radiation C. It takes into account the antenna feed line loss D. It takes into account the thermal effects of the final amplifier T0C10 HRLM (9-7) Why is duty cycle one of the factors used to determine safe RF radiation exposure levels? 2014 Technician License Course

82. A. The difference between the lowest power output and the highest power output of a transmitter B. The difference between the PEP and average power output of a transmitter C. The percentage of time that a transmitter is transmitting D. The percentage of time that a transmitter is not transmitting T0C11 HRLM (9-7) What is the definition of duty cycle during the averaging time for RF exposure? 2014 Technician License Course

83. A. RF radiation does not have sufficient energy to cause genetic damage B. RF radiation can only be detected with an RF dosimeter C. RF radiation is limited in range to a few feet D. RF radiation is perfectly safe T0C12 HRLM (9-5) How does RF radiation differ from ionizing radiation (radioactivity)? 2014 Technician License Course

84. A. 3 times as much B. 1/2 as much C. 2 times as much D. There is no adjustment allowed for shorter exposure times T0C13 HRLM (9-7) If the averaging time for exposure is 6 minutes, how much power density is permitted if the signal is present for 3 minutes and absent for 3 minutes rather than being present for the entire 6 minutes? 2014 Technician License Course