1. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)1 ATF2 Layout/Optics (v4.0) nBPM (SLAC) nBPM (KEK) FONT Compton / laserwire ODR Existing ATF Extraction Line Coupling Correction / Emittance Diagnostics

2. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)2 (v4.0)

3. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)3 rematched geometry (DR septa realignment) –see report of 55 th ATF2 Weekly Meeting (August 22, 2007) some EXT devices returned to v3.5 locations (Sugahara-san’s list) QS1X and QS2X at Okugi-san’s locations QK2X and QK3X are still in the MAD deck, even though they will not be installed initially updated effective lengths for FF bends and FD quadrupoles updated diagnostic station locations (IPBPM, nBPM; no ODR to start) IPBPM and nBPM reference cavities added; QBPM reference cavities (4) at Honda-san’s suggested locations separate QBPM + mover at vertical “IP phase” for feedback (between QM14FF and QM13FF) … now 34 QBPMs total; QM14FF’s QBPM is now standard three movers restored to FF matching quad section (QM16FF, QM15FF, and QM14FF); now 27 FFTB movers total (plus one Honda-san special for feedback QBPM) IP configuration per Okugi-san’s 5 th ATF2 Project Meeting presentation drift between BDUMP and dump is 2.0 m Version 4.0 Features

4. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)4 Okugi-san’s stripline BPM assignments Kuroda-san’s device names (also renamed magnet movers using Kuroda-san’s naming convention) FONT devices added per J. Resta-Lopez presentation of February 28, 2008 new initial Twiss and QM6R/QM7R strengths from “drdsgn07Dec03disp” optics –QM6R.1: -0.71212 (DRLBW44) → -0.71174 –QM7R.1: 0.39808 (DRLBW44) → 0.40822 –zero η and η′ (X and Y) at entrance to extraction kicker Version 4.0 Features (cont.)

5. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)5 QBPM (standard) d/s QD6FF QBPM (standard) d/s QM14FF QBPM (standard) between QM14FF and QM13FF [feedback] from Honda-san’s report of 53rd ATF2 Weekly Meeting (July 25, 2007)

6. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)6 from Honda-san’s report of 55thd ATF2 Weekly Meeting (August 22, 2007) QBPM moved to d/s end

7. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)7 from Honda-san’s report of 55thd ATF2 Weekly Meeting (August 22, 2007) not in v4.0

8. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)8 Stripline BPM Device List Blue ; wide beam pipe Red ; Long Electrode ( High Resolution) Old BPM Name Electrode Length Pipe Diamete r OriginalModifiedBellows Magnet Thickness Pipe Length Total Length Magnet Thickness Pipe Length Total Length OriginalModified Electrod e Side No Electrode Electrode Side No Electrode ML1X40Narrow601551203356015560275○○ ML2X40Wide60180120360180155330665×○ ML3X40Wide6018012036018015560395×○ ML4X40Wide1801206036018015560395×○ ML5X40Wide1801556039518015560395○○ ML6X40Wide1801206036018015560395×○ ML7X40Narrow18012060360180155220555×○ ML8X120Narrow602708041018022060460○○ ML9X120Narrow18022030070018022060460○○ ML10X120Narrow18022030070018022060460○○ ML11X120Narrow18022030070018022060460○○ ML12X120Narrow180220300700N/A22030250○○ ML13X40NarrowN/A 170N/A 170×× ML14X40NarrowN/A 37518015560395×○ from Okugi-san’s 5 th ATF2 Project Meeting presentation

9. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)9 nameold namefunctiontype locationcomments ML1XML2XBPMstripline (L.R.)d/s end of QF1X (Hitachi 180) MS1X move by +35mm ML2XML3XBPMstripline (L.R.)d/s end of QD2X (Hitachi 180) ML3XML4XBPMstripline (L.R.)d/s end of QF3X (Hitachi 180) ML4XML5XBPMstripline (L.R.)d/s end of QF4X (Hitachi 180) ML5XML6XBPMstripline (L.R.)u/s end of QD5X (Hitachi 180) ML6XML7XBPMstripline (L.R.)u/s end of QF6X (Hitachi 180) ML7XML1XBPMstripline (L.R.)d/s end of QF7X (Hitach 60) ML8XML14XBPMstripline (H.R.)d/s end of QD8X (Hitachi 180) ML9XML8XBPMstripline (H.R.)u/s end of QF9X (Hitachi 180) ML10XML9XBPMstripline (H.R.)d/s end of QF13X (Hitachi 180) ML11XML10XBPMstripline (H.R.)d/s end of QD14X (Hitachi 180) ML12XML11XBPMstripline (L.R.)d/s end of QF15X (Hitachi 180) QBPM1X BPMC-band cavityd/s end of QD10X (QEA 180) No mover QBPM2X BPMC-band cavityd/s end of QF11X (QEA 180) No mover QBPM3X BPMC-band cavityd/s end of QD12X (QEA 180) No mover QBPM4X BPMC-band cavityd/s end of QD16X (QEA 180) No mover QBPM5X BPMC-band cavityd/s end of QF17X (QEA 180) No mover QBPM6X BPMC-band cavityd/s end of QD18X (QEA 180) No mover QBPM7X BPMC-band cavityd/s end of QF19X (QEA 180) No mover QBPM8X BPMC-band cavityu/s end of QD20X (Hitach 60) C-band BPM with Hitachi QBPM9X BPMC-band cavityd/s end of QF21X (Hitach 60) C-band BPM with Hitachi nameold namefunctiontype locationcomments ML1FFML12XBPMstripline (H.R.)between QM12FF and QM11FFpulse-to-pulse feedback ML2FFML13XBPMstripline (L.R.)d/s dump bend from Okugi-san’s 5 th ATF2 Project Meeting presentation

10. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)10 Sughara-san’s List all devices from Sugahara-san’s list returned to v3.5 locations tuning/tracking simulations have not yet been made to check the performance

11. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)11 BH2 BH1 K1 K2 BH1 (SHI “H”) strengths same as existing EXT BH2 (SHI “C”) has 110% of present strength 6.0 m ATF2 Inflector (v4.0)

12. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)12 from Okugi-san’s 5th ATF2 Project Meeting talk 200 150 400 425 567.5 135 200 100 607.5 QD0FF S-band BPM Sweeping Magnet Honda Monitor 100 180235 100 Carbon Wire Scanner C-band BPM 180 Screen Monitor 825 BDUMP 485 200 660 180 100 Stripline BPM ICT 1015 100 180 185 IP BPM IP FF: IP Area MQD0FFMBS2IP M1&2IP MBS1IP Shintake Monitor MW1IP MPIP SWEEP MSPIPMDUMP ICTDUMP

13. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)13 K 1 (+)K 2 (+)

14. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)14 SQ WS 90° 180° 90° – x – y 11° 18° 28° 29° 42° 43° 29° 80.6 10.0 154.7 6.7 88.5 11.7 153.0 6.6 86.5 11.7 σ (μm) 7 < σ x / σ y < 23

15. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)15

16. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)16

17. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)17

18. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)18 2 nd order dispersion

19. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)19 chromaticity (EXT)

20. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)20 beam size (μm) Parameters energy = 1.3 GeV γ ε x = 5×10 -6 m ε x = 2×10 -9 m γ ε y = 3×10 -8 m ε y = 1.2×10 -11 m σ z = 8 mm σ δ = 0.08 % β x * = 4 mm β y * = 0.1 mm σ x * = 2.828 μm σ y * = 34 nm

21. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)21 Program σ y *(rms) σ y *(sig)  ε y Δ  ε y nm nm nm % -------- -------- -------- ------- ----- MAD 37.156 36.213 31.9280 6.4 ELEGANT 37.578 35.507 32.3227 7.7 TURTLE 35.680 35.514 31.1056 3.7 DIMAD 38.179 36.482 32.6578 8.9 LUCRETIA SAD Tracking Results perfect machine 10,000 particles (Gaussian distributions; 5σ) sextupole component in SHI H-bends included multipoles in SLAC epoxy kickers, QM7R.1, BS1X, QF1, and QD0 not included no chromatic correction in EXT

22. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)22 stabilize beam into Final Focus (especially at sextupoles) 2 dipole correctors per plane (Final Doublet phase and IP phase) 2 BPMs per plane (Final Doublet phase and IP phase) correctors and BPMs should be as far downstream as possible feedback BPMs should have no dispersion cavity BPMs used for feedback must have movers BPMs must have resolution ≤ spot size for sub-σ stabilization requires sub-micron resolution for vertical BPM at IP phase –use a dedicated QBPM with mover at the selected location (between QM14FF and QM13FF ) use a stripline BPM for horizontal BPM at IP phase Pulse-to-Pulse Feedback

23. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)23 IP IP phase FD phase IP phase FD phase IP phase FD phase IP phase FD phase IP phase FD phase ZV11X ZV1FF MQD10BFF MFB2FF ZH10X ZH1FF MFB1FF MQF9BFF ZH ZV BPM (v4.0)

24. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)24 302.6 µm 0.4 µm 1910.5 µm 7.9 µm ZH BPM ZV BPM (v4.0)

25. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)25 still need 2 new skew quadrupoles (QS2X and QS3X) need two 20 amp bipolar power supplies (QK1X and QK4X) QD14X running at 97% of max power supply current (see parts list … ) power supply for BDUMP power supplies for ZX1X, ZX2X, and ZX3X (BH1X and BH2X trim windings) off-beamline components (PLIC, detectors, gamma collimators, MONALISA, etc.) not included also see comments and notes on each worksheet of the parts list … Version 4.0 Parts List Issues

26. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)26 still studying effects of far-off-axis extraction through QM7R.1 … may need to rematch EXT or change DR optics to compensate … HIGH PRIORITY need to redo full tuning simulations with QK2X and QK3X missing other Feedforward / Feedback device locations? (horizontal plane … ) simulations with estimated multipole content of SLAC epoxy kickers, QM7R.1, BS1X, shimmed QC3s, … need to redo and expand full tuning simulations (especially with realistic errors in diagnostics) revisit fine-tuning of higher-order aberrations (à la Andre) need “small spot” optics for LW1X (1 µm) operation MPS issues for commissioning? Version 4.0 Optics and Simulation Issues

27. Mark Woodley, SLAC6th ATF2 Project Meeting (May 27, 2008)27 Version 4.0 Release Files Release v4.0 Files (May 27, 2008) -------------------------------------------------------------------------------- ATF2_common.xsif : MAD input file (common definitions) EXT_v4.0.xsif : MAD input file (EXT line) FF_v4.0.xsif : MAD input file (Final Focus) ATF2_v4.0.mad : top level MAD command file ATF2_v4.0.save : MAD SAVE file (for conversion to other optics program inputs) ATF2_v4.0.saveline : MAD SAVELINE file (for conversion to other optics program inputs) -------------------------------------------------------------------------------- ATF2v4.0.ppt : v4.0 overview presentation (PowerPoint) ATF2v4.0.pdf : v4.0 overview presentation (pdf) ATF2DeviceListv4.0r0.xls : detailed parts list (Excel) ATF2v4.0Layout.ppt : scaled cartoons of specific locations (PowerPoint) ATF2v4.0Devices.fig : scrollable beamline schematic (Matlab figure file) --------------------------------------------------------------------------------