Presentation is loading. Please wait.

Presentation is loading. Please wait.

Improvement of indirect slumping technology by using a pressure frame Mingwu Wen, Laura Proserpio, Peter Friedrich Max-Plank-Institute for Extraterrestrial.

Published byPosy Walker Modified over 9 years ago

Similar presentations

Presentation on theme: "Improvement of indirect slumping technology by using a pressure frame Mingwu Wen, Laura Proserpio, Peter Friedrich Max-Plank-Institute for Extraterrestrial."— Presentation transcript:

1 Improvement of indirect slumping technology by using a pressure frame Mingwu Wen, Laura Proserpio, Peter Friedrich Max-Plank-Institute for Extraterrestrial Physics Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015

2 New mouldsTest in vacuum Test with pressure frame INTRAAST project (with HAB) Integration facility improved prototypes JIM module ( with INAF- OAB) JIM in PANTER vibration tests entrapped air ?

3 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 CeSiC mould D263 glass Pumping system Pressure frame Before slumping The electric oven in MPE with pumping system Mould  CeSiC  Concave Wolter I shape (PAR+HYP)  160 mm x 260 mm  CTE: 2.4 x 10 -6 m/(mK) Glass  Schott D263  290 x 190 x 0.55 (0.4) mm 3  Tannealing 557°C  CTE: 7.2 x 10 -6 m/(mK) Pressure frame  Steel  CTE: 13.0 x 10 -6 m/(mK) SLUMPING LABORATORIES and TOOLS @ MPE

4 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 After slumping SLUMPING LABORATORIES and TOOLS @ MPE Metrology facility: 3D high precision measuring table equiped with optical sensor  optical sensor  600 µm measuring range  20 nm resolution in z  glasses kept in place on a 3-points support, gravity effect as derived by FEM subtracted  Correction of T-variation effect CHR on lpkf 3-points support glass Optical sensor z

5 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 Gravity correction Measured shape  Dim. : 200 mm x 100 mm x 0.55 mm  Range: -20µm to 4 µm Shape variation caused by gravity using 3-points support

6 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 Temperature-variation correction T-variation Z-variation scan direction T-variation effects are subtracted for long time scan.

7 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 Application of pressure PF7 PF10 PF9 PF8 PF11 PF12 PF6 Annealing T T max Group 1: Effect of Cleaning Group 2: Effect of pressure time, glass thick.:0.55mm Group 3: Effect of glass thickness glass thick.:0.40mm

8 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 Group 1 : Cleaning  Focal length:7500.00 mm  Radius: 374.157 mm  Alpha: 0.7132° Nominal parameters of the mould Cleaning improved  Middle frequency errors are reduced with better cleaning  New long scale errors are introduced PF test 6PF test 7

9 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 Group 2,3 : Pressure time and glass thickness Z: - 50 µm ~5 0 µm PF7 PF8 PF9 PF10 PF11 PF12 The long scale error increased with longer pressure time especially in the central part of the glasses

10 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 Fitted radius of the mirrors Fitted focal length of the mirrors 7 PF7PF8PF9PF10 PF11 PF12 PF7PF8PF9PF10 PF11 PF12

11 Max-Planck-Institute for Extraterrestrial Physics (MPE) December 09,2015 D263 glass CeSiC mould Pressure frame Kink getting stronger with longer pressure time shrink Long-time pressure PF8 PF10 Further work…  Optimize the gap to decrease the kink  Improve the cleaning  Improve the thermal cycle curve Thanks! gap

Download ppt "Improvement of indirect slumping technology by using a pressure frame Mingwu Wen, Laura Proserpio, Peter Friedrich Max-Plank-Institute for Extraterrestrial."

Similar presentations

Lyon Gantry Status TEC meeting Dec. 2003 D. Contardo Module production in Lyon Rigidifier test on R4 Frame tolerance effect on assembly plates Short term.

Lyon Gantry Status TEC meeting Dec D. Contardo Module production in Lyon Rigidifier test on R4 Frame tolerance effect on assembly plates Short term.
TMT.OPT.PRE.11.046.DRF011 Thirty Meter Telescope Secondary and Tertiary Mirror Systems International Symposium on Photoelectronic Detection and Imaging.

TMT.OPT.PRE DRF011 Thirty Meter Telescope Secondary and Tertiary Mirror Systems International Symposium on Photoelectronic Detection and Imaging.
Thermoforming Process

Thermoforming Process
Femtosecond Laser Micromachining of BioMEMS BioMEMS Lab Mechanical and Aerospace Engineering University of Texas Arlington.

Femtosecond Laser Micromachining of BioMEMS BioMEMS Lab Mechanical and Aerospace Engineering University of Texas Arlington.
Precision Displacement Measurement via a Distance Measuring Interferometer (DMI)

Precision Displacement Measurement via a Distance Measuring Interferometer (DMI)
Pt as a release layer for IXO thermally formed glass optics: preliminary results S. Romaine, R. Bruni, P. Gorenstein, S. Park, P.Reid Harvard-Smithsonian.

Pt as a release layer for IXO thermally formed glass optics: preliminary results S. Romaine, R. Bruni, P. Gorenstein, S. Park, P.Reid Harvard-Smithsonian.
18/6/2007 M.Taborelli, TS-MME Structure fabrication techniques and possibilities M.Taborelli Disk structures Quadrant structures ….most of it inspired.

18/6/2007 M.Taborelli, TS-MME Structure fabrication techniques and possibilities M.Taborelli Disk structures Quadrant structures ….most of it inspired.
Effect of vibrations on void content in composite materials Jelena Muric-Nesic Supervisors: P.Compston, N.Noble, Z.Stachurski DERF June 2008.

Effect of vibrations on void content in composite materials Jelena Muric-Nesic Supervisors: P.Compston, N.Noble, Z.Stachurski DERF June 2008.
ASIC3 WorkshopLandsdowne, VA May 16-18, 2006 J. Harder Page 1 Calibration Status of the Solar Irradiance Monitor (SIM) : The Present and the Future Jerald.

ASIC3 WorkshopLandsdowne, VA May 16-18, 2006 J. Harder Page 1 Calibration Status of the Solar Irradiance Monitor (SIM) : The Present and the Future Jerald.
Initial Calibration and Stability Results from the LiCAS RTRS FSI System John Dale for the LiCAS Collaboration IWAA February 2008.

Initial Calibration and Stability Results from the LiCAS RTRS FSI System John Dale for the LiCAS Collaboration IWAA February 2008.
Isaac Vasserman Magnetic Measurements and Tuning 10/14/2004 1 I. Vasserman LCLS Magnetic Measurements and Tuning.

Isaac Vasserman Magnetic Measurements and Tuning 10/14/ I. Vasserman LCLS Magnetic Measurements and Tuning.
On-Orbit Adjustment Calculation for the Generation-X X-ray mirror Figure D. A. Schwartz, R. J. Brissenden, M. Elvis, G. Fabbiano, D. Jerius, M. Juda, P.

On-Orbit Adjustment Calculation for the Generation-X X-ray mirror Figure D. A. Schwartz, R. J. Brissenden, M. Elvis, G. Fabbiano, D. Jerius, M. Juda, P.
CompTest 2011 Monitoring key parameters during the elaboration of composite parts by resin transfer moulding process (RTM) Presented by Marc WARIS 15/02/2011,

CompTest 2011 Monitoring key parameters during the elaboration of composite parts by resin transfer moulding process (RTM) Presented by Marc WARIS 15/02/2011,
Generation-X telescope: Measurement of On-Orbit Adjustment Data Dan Schwartz, R. J. Brissenden, M. Elvis, G. Fabbiano, T. Gaetz, D. Jerius, M. Juda, P.

Generation-X telescope: Measurement of On-Orbit Adjustment Data Dan Schwartz, R. J. Brissenden, M. Elvis, G. Fabbiano, T. Gaetz, D. Jerius, M. Juda, P.
A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.

A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.
University of Huddersfield International Institute for Accelerator Applications Professor Rob Edgecock Professor Roger Barlow Target simulation and opportunities.

University of Huddersfield International Institute for Accelerator Applications Professor Rob Edgecock Professor Roger Barlow Target simulation and opportunities.
 Design  Manufacturing  Recent X-Ray tests  Status Vadim Burwitz, Peter Friedrich on behalf of the eROSITA team.

 Design  Manufacturing  Recent X-Ray tests  Status Vadim Burwitz, Peter Friedrich on behalf of the eROSITA team.
Triggers Targets Experimental realisation Metrological application of basic science & technology Enabling science & technology 2005 2010 2015 2020 Dimensional.

Triggers Targets Experimental realisation Metrological application of basic science & technology Enabling science & technology Dimensional.
GTK Cooling Summary of frame and cooling plate Shear tests Alessandro Mapelli Michel Morel Jerome Noel Georg Nüßle Paolo Petagna Giulia Romagnoli GigaTracKer.

GTK Cooling Summary of frame and cooling plate Shear tests Alessandro Mapelli Michel Morel Jerome Noel Georg Nüßle Paolo Petagna Giulia Romagnoli GigaTracKer.
2 nd collaboration meeting on X-band Accelerator Structure Design and Test-Program Structure fabrication Comparative analysis of disk and quadrant manufacture.

2 nd collaboration meeting on X-band Accelerator Structure Design and Test-Program Structure fabrication Comparative analysis of disk and quadrant manufacture.

Similar presentations

Ads by Google