1. MOTORCRAFT 2100/2150 CARBURETOR REBUILD

2. Step 1: Locate carb I.D. tag, Write down info to purchase correct rebuild kit.

3. Step 2: check parts kit to ensure correct parts are there.

4. Step 3: Refer to parts break- down and enclosed instructions for reference and ease of rebuild.

5. Remove carburetor lid, linkages, vacuum lines and carb from vehicle. STEP 4:

6. Step 5: Remove dashpot, Accelerator pump housing and diaphragm.

7. Step 6: Remove float, needle valve and main jets.

8. Step 7: Remove secondary venturis, Power valve, accelerator check valve ball and mixture screws.

9. S tep 8: After Cleaning in carburetor cleaner, blow out all passages and re-assemble in reverse order of disassembly.

10. Step 9: Next, make your float adjustment and install carb top. Adjust mixture and idle screws as needed after installation on engine.

11. Step 10: Start your engine and enjoy your restored performance and power!