1. Program a Gas EndPoint

2. 2 SENSUSAR5001 You will need a AR5001 or AR5002 Handheld unit connected by a serial cable to a 900 Unit Field Tool. Connected to port 1 or 2 on the handheld unit.

3. 3 SENSUSAR5001 5001 Handheld link to the 900 tool

4. 4 SENSUSAR5001 Press Enter to get to the next screen

5. 5

6. 6

7. 7 SENSUSAR 5001 After you choose comport Press Enter – Escape - Escape

8. 8 SENSUSAR5001 Press Enter to get to the next screen

9. 9 SENSUSAR5001 Press Enter to get to the next screen Press Enter to get to the next screen

10. 10 SENSUSAR5001 Use this option to edit your defaults Press Enter

11. 11 SENSUSAR5001 Choose the options you will need for your service then hit the ECS key

12. 12 SENSUSAR5001 Choose Meter parameters and hit Enter

13. 13 SENSUSAR5001 Choose the F5 key to start programming

14. 14 SENSUSAR5001 You will need to enter the current Meter ID and hit Enter

15. 15 SENSUSAR5001 Enter the Initial meter reading and select the resolution hit Enter

16. 16 SENSUSAR 5001 Do you want to continue choose yes and Enter Do you want to continue choose yes and Enter

17. 17 SENSUSAR5001 The programming will take about 50 sec.

18. 18 SENSUSAR5001 Radio Successfully Actived Press Enter if everything looks ok

19. 19 SENSUSAR5001 Press Enter to show details

20. 20 SENSUSAR5001 Down arrow to the next page to see all options

21. 21 SENSUS AR5001 Make sure all options are correct ESC and F5 for another unit

22. 22 SENSUSAR5001 Make sure the 900 tool is placed on the Sensus logo to start your programming SENSUSAR5001 Place unit on Sensus logo

23. 23 SENSUSAR5001 SENSUS LOGO Place the 900 tool on the Sensus Logo

24. 24 SENSUSAR5001 Place unit on Sensus logo After you place the 900 tool on the endpoint, hit the F5 key on the handheld unit, to start programming the endpoint