1. LHC Gas System Tutorial Remote / Local connection S.Haider

2. Registration to Windows Terminal Services (WTS) 1.Register on the main Windows Terminal Server of CERN Only necessary if you want to connect from outside CERN https://winservices.web.cern.ch/winservices/ 2.Register on the experiments terminal server by sending an e-mail to Gas.Support@cern.chGas.Support@cern.ch Please state the following information: 1.Your full name and your NICE-username 2.The name of the experiment + sub-detector 3.Do you need write access to the gas systems,- do you need to switch on/off modules? (read access is the default login to the gas systems) 4.Duration during which the access is needed (where applicable) Aug 20082S.Haider

3. Error message if you don’t have WTS access rights Aug 2008S.Haider3 If you see this logon / error message, please proceed with the registration procedure on slide #2

4. Terminal Server Names CERN Main Terminal Server: CERNTS.cern.ch LHC Experiments (concerning gas) Alice: ALIDCSAGW001.cern.ch Atlas : CERNTSATLDCS.cern.ch CMS: CERNTSCMS01.cern.ch LHCb: LBTS03.cern.ch Aug 20084S.Haider User name: CERN\ yourUserName  Important  In the Remote Desktop Connection window, ALWAYS put CERN\ in front of your user name

5. ATLAS login procedure: 1.Connect to WTS of Atlas (Windows Terminal Service via Remote Desktop Connection) 2.Select computer pcatlgcsgas 3.Select panel vision/graphicalFrame/unicosHMI…. 4.Press Run-button Aug 20085S.Haider 2. 3. 4. 1.

6. CMS login procedure: 1.Connect to WTS of CMS 2.Press “GAS UI” button Aug 20086S.Haider

7. ALICE login procedure 1 (2) 1.In Remote desktop Connection - under the tab “Program” - tick “Start the following program on connection” - put under “Program path and file name” the string mstsc /v:ALIGCSTS001 /f Aug 20087S.Haider

8. ALICE login procedure 2 (2): 1.Connect to WTS of ALICE 2.When presented with an empty desktop…. 3.Navigate + press  Aug 20088S.Haider

9. LHCb login procedure: 1.Connect to WTS of LHCb 2.Press “GAS UI” button Aug 20089S.Haider