2. 1 CCNA Semester 2 Introduction to Routers Unit 2 Review JEOPARDY

3. AcronymsInitPotpourriPromptKeys 100 200 300 400 500 Show 100 200 300 400 500

4. Acronyms 100 IOS A: What is Internetwork Operating System?

5. Acronyms 200 A: What is the Command-Line Interface? CLI

6. Acronyms 300 A: What is American Standard Code for Information Interchange? ASCII

7. Acronyms 400 A: What is Power-On Self Test? POST

8. Acronyms 500 A: What is the Command Executive? EXEC

9. Init 100 A: What is Test the hardware and load the bootstrap? When a router initializes, it does this first.

10. Init 200 A: What is a Configuration file? When initializing, the router looks for this after it displays a list of hardware and software on the screen.

11. Init 300 A: What is an IOS image? After the bootstrap has loaded, the router looks for this.

12. Init 400 A: What is Boot ROM Mode? This operating environment is used to load a new IOS image.

13. Init 500 A: What is ROM Monitor mode? This operating environment is used to recover from a lost password

14. Potpourri 100 A: What is an IP address? A device must be assigned one of these in order to permit telnet access to the device.

15. Potpourri 200 A: What is Ctrl-C? Press these keys to exit Setup mode.

16. Potpourri 300 A: What is 10? The default number of previous commands stored in the history buffer

17. Potpourri 400 A: What is the Platform on which the image runs? Of the 3 parts of an IOS name, the first part indicates this.

18. Potpourri 500 A: What is Ctrl-Z? Press these keys to move from any configuration mode into privileged EXEC mode.

19. Prompt 100 A: What is Enable? The command to enter Privileged EXEC mode?

20. Prompt 200 A: What is a Disable? The command to return to User EXEC mode from Privileged EXEC mode

21. Prompt 300 A: What is Privileged EXEC mode ? What this prompt indicates: Router#

22. Prompt 400 A: What is User EXEC mode? What this prompt indicates: Router>

23. Prompt 500 A: What is the Caret (^) symbol? The character that indicates the location of a keyboard entry mistake.

24. Keys 100 A: What is a Question mark (?) character? Use this to get help.

25. Keys 200 A: What is Ctrl-P or the up arrow (↑) key? Use this to display the last command you entered.

26. Keys 300 A: What is Press the Tab key? Doing this will complete a recognized router command.

27. Keys 400 A: What is Crtl-E? Press these keys to move the cursor to the end of a line

28. Keys 500 A: What is RCtrl-A? Press these keys to move the cursor to the beginning of a line

29. Show 100 A: What is show flash? Enter this command to view the size of the IOS image

30. Show 200 A: What is show version? Enter this command to view the configuration register setting.

31. Show 300 A: What is show history? Enter this command to view all of the previous commands stored in the buffer.

32. Show 400 A: What is show running-config? Enter this command to display the configuration currently in use.

33. Show 500 A: What is show version? Enter this command to see how long a router has been running.

34. Final Jeopardy This command is used to load a new IOS image into a router. A: What is copy tftp flash?