Presentation is loading. Please wait.

Presentation is loading. Please wait.

Energy and Its Conservation. Energy Energy is defined as the ability of a body or system of bodies to perform work. Energy can be subdivided into other.

Similar presentations


Presentation on theme: "Energy and Its Conservation. Energy Energy is defined as the ability of a body or system of bodies to perform work. Energy can be subdivided into other."— Presentation transcript:

1 Energy and Its Conservation

2 Energy Energy is defined as the ability of a body or system of bodies to perform work. Energy can be subdivided into other categories such as: –Mechanical energy –Heat energy –Electrical energy –Chemical energy –Atomic energy

3 Work Work (W) is done in displacing a body a distance x by a force F in the direction of the motion. Work is the product of the force acting on the body, in the direction of displacement, times the displacement x of the body.

4 Work According to the physics definition of work, work is not done on an object unless the object is moved. If you push against a wall for a period of time, you may feel tired, but if the wall did not move, you did not do any mechanical work. Your body may have used chemical energy.

5 Work If the force acting on the body is not parallel to the displacement, then the work done is the product of the force in the direction of the displacement, times the displacement. F  F x =Fcos  x

6 Work The units of work are the based on the product of force and displacement which would be the newton-meter (N-m) or the foot-pound (ft-lb). 1 newton-meter = 1 joule (J) The joule unit is named after James Prescott Joule, a British physicist (and brewer.

7 Work What is the minimum amount of work necessary to lift a 1.00 lb box to a height of 5.00 ft? Given: –F=mg=1.00 lb –X=h=5.00 ft Answer: 5.00 ft-lb

8 Power Power is defined as the time rate of doing work. Doing work rapidly expends more power than when you go slowly.

9 Power The unit of power is the Joule/second or foot-pound/second. 1 J/s = 1 watt (W) The watt unit is named after James Watt (1736-1819), a Scottish engineer who perfected the steam engine. 1 horsepower (hp) = 745.7 W or 550 ft-lb/s

10 Power Power can also be calculated if you know the applied force and the velocity. so

11 Gravitational Potential Energy Gravitational Potential Energy is defined as the energy that a body possesses due to its position above a reference level. As an object is lifted to a higher position, it takes more work and therefore gains more energy. Potential energy is inactive or stored energy.

12 Gravitational Potential Energy A dam is constructed to hold back water and create potential energy based upon the height of the dam. The energy comes from the work that is done to raise move an object to a new position.

13 Gravitational Potential Energy Any change in potential energy is due to a change in position of the object with respect to the reference level. Any change in PE energy is due to work being done on the system.

14 Gravitational Potential Energy In addition to gravitational potential energy, a body can also have elastic potential energy and electrical potential energy. A compressed spring has potential due to the work done in compressing it.

15 Kinetic Energy Kinetic Energy (KE)is the amount of energy that an object possesses due to its motion. The mass (m) of the object and its velocity (v) both factor into its kinetic energy.

16 Kinetic Energy The amount of kinetic energy that an object has is equal to the work done getting the object into motion.

17 Kinetic Energy Any change in velocity will cause a change in the kinetic energy. Any change in energy is due to work being done on the system.

18 Conservation of Energy In any closed system (isolated), the total amount of energy remains constant. There may be a transfer of energy from one form to another, but the total remains constant. A ball that is thrown up in the air loses KE on the way up to its maximum height, but it gains PE as it rises.

19 Conservation of Energy Eventually, when the ball stops, all of its initial KE will be transformed into PE. At any point in between, there will be a combination of PE and KE, always adding up to the same total amount of energy. The same transformation occurs for an object that is falling.

20 Conservation of Energy Another example of transformation of energy occurs with a pendulum swinging or a person on a swing.


Download ppt "Energy and Its Conservation. Energy Energy is defined as the ability of a body or system of bodies to perform work. Energy can be subdivided into other."

Similar presentations


Ads by Google