1. LAB SAFETY
Biology
112/111

2. General Safety Rules
1. READ & FOLLOW instructions carefully before attempting to do anything.
2. Wear GOGGLES to protect your eyes from chemicals, heated materials, or things that might be able to shatter.
3. TELL TEACHER if any spills or accidents occur.

3. General Safety Rules
4. After handling chemicals, always WASH YOUR HANDS with soap and water.
5. During lab work, keep your HANDS away from your face.
6. Tie back LONG hair.

4. General Safety Rules 7. Roll up LONG sleeves.
8. Know the LOCATION of the fire extinguisher, fire blanket, eyewash station, and first aid kit.
9. Keep your work area UNCLUTTERED. Take to the lab station only what is necessary.

5. General Safety Rules
10. It is suggested that you wear GLASSES rather than contact lenses.
11. Never put anything into your MOUTH during a lab experiment.
12. CLEAN your lab area at the conclusion of the laboratory period.
13. NEVER “horse around” or play practical jokes in the laboratory.

6. Glassware Safety
1. Chipped or cracked GLASSWARE should not be used. Show it to the teacher.
2. BROKEN glassware should not be disposed of in a classroom trashcan. There is a special glass disposal container for it. Use BROOM & DUSTPAN

7. Chemical Safety
1. Wear protective GLOVES and a lab apron whenever heating or pouring hazardous chemicals.
2. Never MIX two chemicals together unless the teacher directs you to.

8. Chemical Safety
3. If you need to smell the odor of a chemical, WAFT the fumes toward your nose with one hand. Do not put your nose over the container and inhale the fumes.

9. Chemical Safety
4. Follow the INSTRUCTIONS of your teacher when disposing of all chemicals.
5. WASH your hands after handling hazardous chemicals.

10. Electrical Safety
1. Lay POWER cords where no one can trip on them or get caught in them.
2. Be sure your hands and your lab area are dry before using electrical equipment.
3. Never poke anything into electrical SOCKETS.

11. Electrical Safety
4. Unplug cords by pulling the PLUG and not the cord.
5. Unplug all electrical equipment at the END of the lab period.

12. Heating Safety
1. Let burners and hotplates cool down before touching them. Perform the SIZZLE TEST to see if they are cool enough.
2. Use tongs and/or protective GLOVES to handle hot objects.
3. Never reach across an OPEN flame or burner.

13. First Aid Injury: Burns
What To Do: Immediately flush with COLD water until burning sensation is lessened.

14. First Aid Injury: Cuts, bruises
What To Do: Do not touch an open wound without safety gloves Pressing directly on minor cuts will STOP bleeding in a few minutes. Apply cold compress to bruises to reduce swelling.

15. First Aid Injury: Fainting
To Do: Provide FRESH air and have the person recline so that their head is LOWER than the rest of their body.

16. First Aid
Injury: Eyes
What To Do: Flush eyes immediately with plenty of water (15 MINUTES at the eyewash). If a foreign object is lodged in the eye, do not allow the eye to be rubbed.

17. First Aid Injury: Poisoning
What To Do: Find out what substance was responsible for the poisoning and alert the TEACHER immediately.

18. FIRE SAFETY

19. FIRE SAFETY
Fires can either be extinguished by smothering the flames with a fire blanket or clothing OR a fire extinguisher!
To use a fire extinguisher properly REMEMBER: P-A-S-S!
PULL the PIN
AIM at the BASE
SQUEEZE the Trigger
SWEEP side to side

20. Fires of organic matter that will leave ashes
Always use the right type of fire extinguisher for each specific type of fire.
*LHHS extinguishers (ABC type)
CLASS A Fires:
Fires of organic matter that will leave ashes
Example: WOOD, paper, tissues

21. CLASS B FIRES:
Fires of flammable LIQUIDS
Examples: Gasoline, solvents
NOTE:
Water is not a good extinguisher because it spreads the liquid around.

22. CLASS C FIRES:
Fires of an ELECTRICAL nature
EXAMPLES: Computers, photocopiers

23. WHMIS Workplace Hazardous Materials Information Systems
The 3 components to the WHMIS system are:
MSDS
Worker Education
Labels on all Products

24. MSDS Material SAFETY Data Sheet
Stored in binders in lab areas
All known chemicals
8 sections (name, ingredients, physical data, fire hazards, reactivity data, toxicological properties, preventive measures, first aid measures)

25. WHMIS Labels – Workplace Hazardous Materials Information System
Compressed GAS ex. Helium, propane
Flammable/Combustible ex: methane gas, acetone
Oxidizing Material ex: Chromic Acid
Poisonous Infectious (IMMEDIATE & Serious Toxic Effects) ex: cyanide
Poisonous Infectious (Other Toxic Effects) ex: mercury, lead
Biohazardous Infectious ex: NEEDLES
Corrosive Materials ex: degreaser
Dangerously Reactive ex: pure sodium

26. HHPS Symbols Hazardous Household Product Symbols
Levels of Severity (Danger, Warning and Caution)

27. Precautions related to Dissections:
When working with preserved specimens be in a well-ventilated area
Wear vinyl gloves at all times
To reduce the irritating effects of chemical preservatives, rinse specimen under running water to eliminate excess and dilute what remains
Review procedure for cuts and punctures from dissecting tools
When cleaning dissecting instruments, hold sharp edges away from you.
Always ask the teacher re: proper disposal of specimens…special containers for sharps, animal tissue and preservative disposal

28. When working with bacteriologic specimens:
If you have open wounds or cuts on your hands, cover them with a bandage or wear latex gloves.
Disinfect lab bench tops before and after handling bacterial cultures.
While handling bacteria, keep your hands away from your eyes, nose, and mouth.
Wash your hands thoroughly after handling bacterial
If a culture is spilled, cover the spill area with paper towel and flood the paper towels with disinfectant. Wait 20 minutes and then wipe up the spill with more paper towels and dispose of the paper towel in a empty bag.