Download presentation
1
INTRODUCTION TO SIGNALS
Chapter 2 INTRODUCTION TO SIGNALS DeSiaMore
2
Definition A Signal: is a function that specifies how a specific variable changes versus an independent variable such as time. Usually represented as an X-Y plot. DeSiaMore
3
Classification of Signals (1/4)
Analog vs. Digital signals: Analog signals are signals with magnitudes that may take any value in a specific range. Digital signals have amplitudes that take only a finite number of values. DeSiaMore
4
Classification of Signals (2/4)
Continuous-time vs. discrete-time: Continuous-time signals have their magnitudes defined for all values of t. They may be analog or digital. Discrete-time signals have their magnitudes defined at specific instants of time only. They may be analog or digital. DeSiaMore
5
Classification of Signals (3/4)
Periodic vs. aperiodic signals: Periodic signals are signals constructed from a shape that repeats itself regularly after a specific amount of time T0, that is: f(t) = f(t+nT0) for all integer n Aperiodic signals do not repeat regularly. DeSiaMore
6
Energy and Power DeSiaMore
7
Classification of Signals (4/4)
Energy Signals: an energy signal is a signal with finite energy and zero average power (0 ≤ E < , P = 0) Power Signals: a power signal is a signal with infinite energy but finite average power (0 < P < , E ). DeSiaMore
8
More on Energy and Power Signals
A signal cannot be both an energy and power signal. A signal may be neither energy nor power signal. All periodic signals are power signals (but not all non–periodic signals are energy signals). Any signal f that has limited amplitude (|f| < ) and is time limited (f = 0 for |t |> t0) is an energy signal. The square root of the average power of a power signal is called the RMS value. DeSiaMore
9
Evaluate E and P and determine the type of the signal
It is a Power signal 1 2 8 DeSiaMore
10
Evaluate E and P and determine the type of the signal
It is an energy signal DeSiaMore
11
Basic Signal Operations (1/4)
Time Shifting: given the signal f(t), the signal f(t–t0) is a time-shifted version of f(t) that is shifted to the left if t0 is positive and to the right if t0 is negative. DeSiaMore
12
Basic Signal Operations (2/4)
Magnitude Shifting: Given the signal f(t), the signal c +f(t) is a magnitude-shifted version of f(t) that is shifted up if c is positive and shifted down if c is negative. DeSiaMore
13
Basic Signal Operations (3/4)
Time Scaling and Time Inversion: Given f(t), the signal f(at) is a time-scaled version of f(t), where a is a constant, such that f(at) is an expanded version of f(t) if 0<|a|<1, and f(at) is a compressed version of f(t) if |a|>1. If a is negative, the signal f(at) is also a time-inverted version of f(t). DeSiaMore
14
Basic Signal Operations (4/4)
Magnitude Scaling and Mag. Inversion: Given f(t), the signal bf(t) is a magnitude-scaled version of f(t), where b is a constant, such that bf(t) is an attenuated version of f(t) if 0<|b|<1, and bf(t) is an amplified version of f(t) if |b|>1. If b is negative, the signal bf(t) is also a magnitude-flipped version of f(t). DeSiaMore
15
Given f(t), sketch 4–3f(–2t–6)
-2 2 -1 6 f(t) DeSiaMore
16
Unit Impulse Function (Dirac delta function)
Graphical Definition: The rectangular pulse shape approaches the unit impulse function as approaches 0 (notice that the area under the curve is always equal to 1). DeSiaMore
17
Unit Impulse Function (Dirac delta function)
Mathematical Definition: The unit impulse function (t) satisfies the following conditions: 1. (t) = if t 0, 2. DeSiaMore
18
Properties of Delta Function
f(t)d(t) = f(0)d(t) DeSiaMore
19
Trigonometric Fourier Series
A signal g(t) in the interval t1 t t1+T0 can be represented by T0 = 2 / 0 DeSiaMore
20
Or, in the compact form If g(t) is even then bn = 0 for all n
If g(t) is odd then an=0 for all n. C0 = a0 ; DeSiaMore
21
Remarks on Fourier Series (FS) Representations
The frequency 0= 2p/T0 is called the fundamental frequency and the multiple of this frequency n0 is called the nth harmonic. FS of g(t) is equal to g(t) over the interval t1 t t1+T0 only. The FS for all t is a periodic function of period T0 in which the segment of g(t) over the interval t1 t t1+T0 repeats periodically. If the function g(t) itself is periodic with period T0 then the FS represents g(t) for all t. DeSiaMore
22
Exponential Fourier Series
Dn is related to Cn and n as | Dn | is called the amplitude spectrum of the signal. Dn is called the phase spectrum of the signal. They provide a frequency-domain representation of the signal. DeSiaMore
23
Parseval’s Theorem Let g(t) be a periodic signal. The power of g(t) is equal to the sum of the powers of its Fourier Components. DeSiaMore
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.