2. Introduction to Inference Tests of Significance

3. Errors in the justice system Actual truth Jury decision GuiltyNot guilty Guilty Not guilty Correct decision Type I error Type II error

4. “No innocent man is jailed” justice system Actual truth Jury decision GuiltyNot guilty Guilty Not guilty Type I error Type II error smaller larger

5. “No guilty man goes free” justice system Actual truth Jury decision GuiltyNot guilty Guilty Not guilty Type I error Type II error smaller larger

6. Errors in the justice system Actual truth Jury decision GuiltyNot guilty Guilty Not guilty Correct decision Type I error Type II error (H a true)(H 0 true) (reject H 0 ) (fail to reject H 0 )

7. Type I and Type II example Water samples are taken from water used for cooling as it is being discharged from a power plant into a river. It has been determined that as long as the mean temperature of the discharged water is at most 150 o F, there will be no negative effects on the river's ecosystem. To investigate whether the plant is in compliance with regulations that prohibit a mean discharge water temperature above 150 o, 50 water samples will be taken at randomly selected times, and the temperature of each sample recorded. The resulting data will be used to test the hypotheses H o :  = 150 o versus H a :  > 150 o.

8. Type I and Type II example Type I error: We think the water temperature is greater than 150 o, but actually the temperature is equal to 150 o. Consequence: We falsely accuse the plant of producing water too hot and harming the environment when nothing wrongful was done.

9. Type I and Type II example Type II error: We think the water temperature is equal to 150 o, but actually the temperature is greater than 150 o. Consequence: We believe the plant’s water is a normal temperature, when actually they are harming the environment.

10. Type I and Type II errors If we believe H a when in fact H 0 is true, this is a type I error. If we believe H 0 when in fact H a is true, this is a type II error. Type I error: if we reject H 0 and it’s a mistake. Type II error: if we fail to reject H 0 and it’s a mistake. APPLET

11. Type I and Type II example A distributor of handheld calculators receives very large shipments of calculators from a manufacturer. It is too costly and time consuming to inspect all incoming calculators, so when each shipment arrives, a sample is selected for inspection. Information from the sample is then used to test Ho: p =.02 versus Ha: p <.02, where p is the true proportion of defective calculators in the shipment. If the null hypothesis is rejected, the distributor accepts the shipment of calculators. If the null hypothesis cannot be rejected, the entire shipment of calculators is returned to the manufacturer due to inferior quality. (A shipment is defined to be of inferior quality if it contains 2% or more defectives.)

12. Type I and Type II example Type I error: We think the proportion of defective calculators is less than 2%, but it’s actually 2% (or more). Consequence: Accept shipment that has too many defective calculators so potential loss in revenue.

13. Type I and Type II example Type II error: We think the proportion of defective calculators is 2%, but it’s actually less than 2%. Consequence: Return shipment thinking there are too many defective calculators, but the shipment is ok.

14. Type I and Type II example Distributor wants to avoid Type I error. Choose  =.01 Calculator manufacturer wants to avoid Type II error. Choose  =.10

15. Concept of Power Definition? Power is the capability of accomplishing something… The power of a test of significance is…

16. Power Example In a power generating plant, pressure in a certain line is supposed to maintain an average of 100 psi over any 4 - hour period. If the average pressure exceeds 103 psi for a 4 - hour period, serious complications can evolve. During a given 4 - hour period, thirty random measurements are to be taken. The standard deviation for these measurements is 4 psi (graph of data is reasonably normal), test H o :  = 100 psi versus the alternative “new” hypothesis  = 103 psi. Test at the alpha level of.01. Calculate a type II error and the power of this test. In context of the problem, explain what the power means.

17. Type I error and   is the probability that we think the mean pressure is above 100 psi, but actually the mean pressure is 100 psi (or less)

18. Type I error and 

19. Type II error and 

20.  is the probability that we think the mean pressure is 100 psi, but actually the pressure is greater than 100 psi.

21. Power?

22. For a sample size of 30, there is a.9495 probability that this test of significance will correctly detect if the pressure is above 100 psi.

23. Concept of Power The power of a test of significance is the probability that the null hypothesis will be correctly rejected. Because the true value of  is unknown, we cannot know what the power is for , but we are able to examine “what if” scenarios to provide important information. Power = 1 – 