1. Overview of Clinical Chemistry
Lecture 1

2. Definition
Clinical chemistry is the area of pathology that is generally concerned with analysis of bodily fluids.
Also known as:
clinical biochemistry,
chemical pathology,
or medical biochemistry. 2
M. Zaharna Clin. Chem. 2009

3. Clinical chemistry 1
Clinical chemistry is a science, a service, and an industry.
As a science, clinical chemistry links the knowledge of general chemistry, organic chemistry, and biochemistry with an understanding of human physiology.
As a service, the clinical chemistry laboratory produces objective evidence from which medical decisions may be made.
As an industry, clinical laboratories are businesses which operate under the regulations and practices that guide commerce
M. Zaharna Clin. Chem. 2009

4. Clinical chemistry 2
Clinical chemistry investigations are used extensively in medicine for a variety of purposes.
The results of most clinical biochemical investigations are expressed
quantitatively as a concentration,
in the case of enzyme measurements, as an activity.
M. Zaharna Clin. Chem. 2009

5. Purpose of Clinical Chemistry Tests
Acidosis progressively impair platelet aggregability and clot formation
CEA: carcinoembryonic antigen 5
M. Zaharna Clin. Chem. 2009

6. Clinical chemistry 3
A central function of the clinical chemistry laboratory is to provide biochemical information for the management of patients.
Such information will be of value only if
it is accurate and relevant,
and if its significance is appreciated by the clinician
So that it can be used appropriately to guide clinical decision-making. 6
M. Zaharna Clin. Chem. 2009

7. Common Clinical Chemistry Tests
Sodium
Albumin
Potassium
Bilirubin
Chloride
Cholesterol
Glucose
Triglycerides
Urea (BUN)
Alkaline Phosphatase
Creatinine
SGOT (AST)
Uric Acid
SGPT (ALT)
Inorganic Phosphate
Lactic Dehydrogenase (LDH)
Calcium
Creatine Phosphokinase (CPK)
Total Protein
The tests listed are conducted routinely by the Chemistry Section of the Clinical Chemistry Laboratory. 7
M. Zaharna Clin. Chem. 2009

8. Types of Specimens for Chemical Analysis
Whole blood, serum or plasma.
The most common specimen is serum, collected in a tube with no anticoagulant so that the blood will clot.
Urine – often 24 hours collection
Others – Cerebrospinal Spinal Fluid (CSF) and other fluids (Peritoneal Fluid, Amniotic Fluid)
CSF 8
Synovial Fluid
M. Zaharna Clin. Chem. 2009

9. Clinical chemistry Test Results
Results from these tests provide valuable clinical information about:
whether specific tissue has been damaged,
and how severely,
and about the functional status of a variety of organ systems.
Test results are interpreted with respect to reference ranges, which are, most typically, 95% confidence intervals of values found in clinically healthy populations. 9
M. Zaharna Clin. Chem. 2009

10. Clinical chemistry Test Results
Biochemical tests are used in diagnosis, prognosis, monitoring and Screening.
Biochemical marker analysis is one factor in the assessment of the patient.
Physicians also gather
history and symptoms of the complaint;
examination findings, such as blood pressure;
and testing by other health-care team members in ancillary fields, such as radiology.
The physician uses all data to assess the patient and implement a plan for treatment. 10
M. Zaharna Clin. Chem. 2009

11. Use of biochemical tests
M. Zaharna Clin. Chem. 2009

12. Screening
Biochemical tests are widely used to determine whether a condition is present sub-clinically.
The best-known example is screening of all newborn babies for phenylketonuria (PKU), which is carried out in many countries. 12
M. Zaharna Clin. Chem. 2009

13. Diagnosis
Medical diagnosis is based on the patient's history, if available, the clinical signs found on examination, and on the results of investigations.
Investigations may be selected to help either confirm or refute a diagnosis, and it is important that the clinician appreciates how useful the chosen test is for these purposes.
Making a diagnosis, even if incomplete, such as a diagnosis of hypoglycaemia without knowing its cause, may allow treatment to be initiated. 13
M. Zaharna Clin. Chem. 2009

14. Monitoring
A major use of biochemical tests is to follow the course of an illness and to monitor the effects of treatment.
To do this, there must be a suitable analyte,
for instance glycated haemoglobin in patients with diabetes mellitus.
Biochemical tests can also be used to detect complications of treatment,
such as hypokalaemia during treatment with diuretics,
and are extensively used to screen for possible drug toxicity, but also in some cases when a drug is in use. 14
M. Zaharna Clin. Chem. 2009

15. Prognosis
Tests used primarily for diagnosis may also provide prognostic information and some are used specifically for this purpose;
for example, serial measurements of plasma creatinine concentration in progressive renal disease are used to indicate when dialysis may be required.
Tests can also indicate the risk of developing a particular condition;
for example, the risk of coronary artery disease increases with increasing plasma cholesterol concentration. 15
M. Zaharna Clin. Chem. 2009

16. Categories of Biochemical Markers
Biochemical markers are used for assessment and diagnosis of disease:
carbohydrates,
lipids,
proteins,
nucleic acids
and the derivatives of these markers.
The assessment of inorganic chemicals, provide a measure of homeostasis in the body.
such as ions,
minerals,
and dissolved gases, 16
M. Zaharna Clin. Chem. 2009

17. Categories of Biochemical Markers
In addition to the measurement of these endogenous substances, the clinical chemistry laboratory provides measurement of chemicals that are exogenous to the body—
beneficial chemicals,
such as therapeutic drugs,
and harmful substances,
such as poisons. 17
M. Zaharna Clin. Chem. 2009

18. Carbohydrates
Carbohydrates are chemical substances that contain only carbon, hydrogen, and oxygen.
The simplest carbohydrates are monosaccharides, which usually contain 3 to 6 carbons.
Monosaccharides are the units that make up more complex carbohydrates.
Glucose, fructose, ribose, and galactose are common monosaccharides of living organisms. 18
M. Zaharna Clin. Chem. 2009

19. Carbohydrates as Biochemical Markers of Disease
The most common carbohydrate disorder in humans is diabetes mellitus.
This disease is caused by an inability to produce or to respond to the hormone insulin.
Laboratory tests of body fluids of individuals with this disease show increased concentrations of glucose.
The laboratory tests for ketones, acids, and glycosylated proteins provide measures of disease severity. 19
M. Zaharna Clin. Chem. 2009

20. Lipids
Lipids are, by definition, organic compounds that are poorly soluble in solutions such as water and soluble in organic solutions such as ether.
Only a limited number of lipids are clinically important. This group includes
fatty acids,
triglycerides,
cholesterol,
and phospholipids. 20
M. Zaharna Clin. Chem. 2009

21. Lipids as Biochemical Markers of Disease
Clinical chemistry laboratories offer many tests for lipid disorders. One of the most common tests is the lipid profile.
This panel of tests includes measures of
triglycerides
cholesterol
Low density lipoprotein cholesterol (LDL-C)
and high-density lipoprotein cholesterol (HDL-C).
The results of testing for these lipids provide measures of risk for coronary artery disease.
M. Zaharna Clin. Chem. 2009

22. Lipids as Biochemical Markers of Disease
M. Zaharna Clin. Chem. 2009

23. Proteins and Amino Acids
The human body requires 20 amino acids as the building blocks of proteins.
Humans make some of these amino acids but must gain the rest, as essential nutrients, through the diet.
Plants and bacteria produce the essential amino acids and many others. 23
M. Zaharna Clin. Chem. 2009

24. Total Serum/Plasma Proteins and Plasma Albumin as Biochemical Markers of Disease
Plasma proteins have functions in many organ and tissue systems.
They are
carrier molecules,
receptor chemicals,
immune response agents,
and enzymes or catalytic proteins.
Total plasma protein is
a measure of nutrition,
the status of many organs and tissues that are involved in protein metabolism,
and the process of breakdown and excretion of protein metabolites. 24
M. Zaharna Clin. Chem. 2009

25. Total Serum/Plasma Proteins and Plasma Albumin as Biochemical Markers of Disease
The measurement of plasma protein fractions provides more specific evidence for diagnosis and assessment of disorders.
Because of its importance in maintaining osmotic pressure, the measure of albumin concentration is a reflection of this pressure.
As a transport protein, the measurement of albumin monitors the ability of the body to transport such diverse substances as bilirubin, fatty acids, and calcium through the blood. 25
M. Zaharna Clin. Chem. 2009

26. Enzymes
An enzyme is a protein catalyst that accelerates the speed of a chemical reaction by binding specifically to a substrate, forming a complex.
This complex lowers the activation energy in the reaction without the enzyme becoming consumed or without changing the equilibrium of the reaction. 26
M. Zaharna Clin. Chem. 2009

27. Enzymes as Biochemical Markers of Disease
Damage to tissue can release different types of enzymes based on their location.
For example, mild inflammation of the liver reversibly increases the permeability of the cell membrane and releases cytoplasmic enzymes such as lactate dehydrogenase (LD), alkaline phosphatase (ALP), and aspartate transaminase (AST).
Distribution of these enzymes within specific types of hepatic tissues varies. ALP is more concentrated in the biliary tree or canalicular tissues, while AST, ALT, and LD are found in parenchymal hepatic cells. 27
M. Zaharna Clin. Chem. 2009

28. The clinical chemistry laboratory and organ systems
Cardiovascular Circulatory System
The clinical chemistry laboratory offers analysis of biochemicals for the assessment of
acute myocardial infarction,
congestive heart failure
and coronary artery disease.
The laboratory offers measurement of lipids as predictive factors for the development of heart disease.
Measurement of arterial blood gases helps assess the acid-base and oxygenation status of the patient. 28
M. Zaharna Clin. Chem. 2009

29. Respiratory Tract
The function of the respiratory tract is to transfer gases from the environment to tissue cells and from tissues cells to the environment.
The respiratory system also helps maintain the acid-base balance in the body. 29
M. Zaharna Clin. Chem. 2009

30. Respiratory Tract
Measurement of arterial blood gases helps assess the function of the respiratory system, as well as the circulatory system.
Blood oxygenation and pH are dependent upon the uptake of oxygen by hemoglobin and removal of carbon dioxide from red blood cells.
The assessment of diseases such as chronic obstructive pulmonary disease is dependent upon the measurement of partial pressures of oxygen and carbon dioxide in arterial blood to monitor the function of the lungs. 30
M. Zaharna Clin. Chem. 2009

31. Liver
The clinical chemistry laboratory offers a lot of tests that provide information about specific diseases of the liver.
Measurement of the concentration of the enzyme alanine transaminase (ALT) provides information about hepatitis.
Measurement of the enzyme alkaline phosphatase (ALP) provides information about biliary tract disorders.
Analysis of the concentrations of proteins that are made in the liver provides information about the ability of the liver to perform this function. 31
M. Zaharna Clin. Chem. 2009

32. Renal System
The clinical chemistry laboratory offers many tests for different biochemical markers of renal function, including electrolytes, minerals, and protein metabolic waste products.
These biochemical markers are measured in serum, urine, and other body fluids. 32
M. Zaharna Clin. Chem. 2009

33. Digestive System
The clinical chemistry laboratory provides information about nutritional status, intestinal absorption, and function of the pancreas and other organs of the digestive tract.
The concentration of proteins of varying half-life helps establish the length of time of nutritional deficiency.
Analysis of gastric fluid assesses the ability of the stomach to secrete acid.
Measurement of serum concentrations of lipase and amylase monitors the exocrine function of the pancreas. 33
M. Zaharna Clin. Chem. 2009

34. Therapeutic drug monitoring
Involves the analysis, assessment and evaluation of circulating concentrations of drugs in serum, plasma, or whole blood.
Purpose is to ensure the medication dose is at therapeutic range and not toxic.
Medications dosage differ between each patient based on metabolic process.
Therapeutic range is narrow for some drugs
below range: drug not effective
above rang: drug toxic 34
M. Zaharna Clin. Chem. 2009

35. Toxicology Study of poisons.
Clinical: the study of interrelationships between toxin exposure and disease states. (diagnosis & therapeutic intervention) 35
M. Zaharna Clin. Chem. 2009

36. Tumour Markers
A tumour marker is a biological substance synthesized and released by cancer cells or substances produced by the host in response to cancerous tissue.
It may be used to:
Detect the presence of a tumour
Monitor the progress of disease
Monitor the response to treatment 36
M. Zaharna Clin. Chem. 2009