1. Ms. Vallejo’s Technical Theater Safety Rules and Regulations
The important rules that everyone must follow when working on the stage or in the shop areas.

2. Safety Rules and Regulations
The following power point is a list of rules and regulations that each student must practice on the Akins stage and shop areas. In order for a student to take part in the many hands-on activities that we will be doing, he/she must pass with an 90 or higher on the written safety test. This is the information is what you must know to pass.

3. Safety Rules and Regulations
1. Keep the workshop clean and tidy at all times.

4. Safety Rules and Regulations
2. Make sure work areas are clear and safe for work to be done.

5. Safety Rules and Regulations
3. Always seek instruction before using an unfamiliar piece of equipment.

6. Safety Rules and Regulations
4. Only use tools and machines for their intended purpose.

7. Safety Rules and Regulations
5. Report all damaged equipment and do not use it until it is repaired.

8. Safety Rules and Regulations
6. Do not remove, alter, or disable any guard or safety devices on any power tool.

9. Safety Rules and Regulations
7. Never distract the attention of another staff member when a person is operating equipment.

10. Safety Rules and Regulations
8. NEVER indulge in horseplay.

11. Safety Rules and Regulations
9. Report all hazards and unsafe conditions and work practices to the Technical Director.

12. Safety Rules and Regulations
10. You may not use a piece of equipment until you have been checked out on that piece of equipment.

13. Safety Rules and Regulations
11. ALWAYS wear closed toe shoes, eye and ear protection, and appropriate clothing on the stage and shop areas.

14. Safety Rules and Regulations
This means:
Do not wear rings, ties, or loose clothing when operating machinery.
Do not wear sandals or flip flops when on stage or shop areas only hard-sole shoes.

15. Safety Rules and Regulations
This means:
Wear safety glasses when cutting or drilling materials.
Face masks should be worn when working with paints and such materials.
Do not wear shorts when working on stage.

16. Safety Rules and Regulations
This means:
Long hair should be tied back.
Remove all dangling necklaces, scarves, etc.
Ear protection may be worn at your discretion.

17. Safety Rules and Regulations
12. Make sure depth and thickness levels are properly set on all cutting blades.

18. Safety Rules and Regulations
13. Never operate equipment until guards are in place and working properly.

19. Safety Rules and Regulations
14. Be aware of others around so that nothing is thrown from the a saw, which may cause injury.

20. Safety Rules and Regulations
15. Make sure all on and off switches are in proper working condition.

21. Safety Rules and Regulations
16. Keep hands and clothing away from cutting surfaces.

22. Safety Rules and Regulations
17. Never adjust settings on machinery until switch is off and blades have ceased to rotate.

23. Safety Rules and Regulations
18. Use safe lifting practices.

24. Safety Rules and Regulations
This means:
Make sure you can physically lift the weight.
Get as close to the object as possible for picking it up.
Make sure your footing is secure.

25. Safety Rules and Regulations
This means:
Do not twist while lifting.
Lift smoothly but not slowly. Do not jerk the load.
Bend at the knees not your waist and keep back straight.
Get someone to help you.

26. Safety Rules and Regulations
This means:

27. Safety Rules and Regulations
19. Never work alone in the shop or shop areas.

28. Safety Rules and Regulations
20. Never work in the scene shop without direct supervision from the teacher.

29. What do we remember?

30. Quiz Time
Which of the following shoes would be the best choice for working in a shop?

31. Quiz Time
Which items are acceptable to wear in the shop?

32. Quiz Time
Which of the following people displays correct lifting?

33. Quiz Time T or F Never work alone in a scene shop.
T or F You may use equipment that you have not been checked out on.
T or F The teacher doesn’t have to be present for students to use power tools.

34. Quiz Time T or F Dull blades are okay for use on lumber.
T or F Keep hands away from cutting areas.
T or F Your workplace should be neat and tidy at all times.

35. Quiz Time
T or F It is not necessary to report damage to tools and equipment.
T or F Always check depth and thickness of cutting blades.
T or F Ear plugs are optional at your discretion.

36. Quiz Time
Which picture best represents horseplay?

37. Quiz Time
Which picture shows the best use for a staple gun?

38. Quiz Time
Which of the following safety devices do you have a choice in wearing?

39. Quiz Time
T or F Always seek instruction before using unfamiliar tools.
T or F Never distract the tech director when someone is operating equipment.
T or F Report all unsafe conditions to the tech director.

40. Quiz Time
T or F Make sure all on and off switches are working properly.
T or F Be aware of others around you.
T or F Never adjust settings while the blade is rotating.

41. The End!