1. ExitTOC TIMSNT Introduction 2003-Part 3 1 Introduction to TIMSNT-Part 3 Part 3: Menu Items Runs, Driver Directions, Stops, Routes and Options Use the buttons to navigate the training package First PagePreviousNextLast Page This training presentation has been separated in to three parts to shorten the download time.

2. ExitTOC TIMSNT Introduction 2003-Part 3 2 Table of Contents Runs Menu Generating Driver Directions Stops Routes Menu Options Menu

3. ExitTOC TIMSNT Introduction 2003-Part 3 3 Examples The screen shots, practices and exercises in this online training presentation were prepared with previous data from Davie County and are merely a guide. You can apply the instructions and use your own county data to practice the step-by-step process, but first perform a backup of your data.

4. ExitTOC TIMSNT Introduction 2003-Part 3 4 Runs Menu

5. ExitTOC TIMSNT Introduction 2003-Part 3 5 Runs Menu  Load runs quickly Enter a School Code Here

6. ExitTOC TIMSNT Introduction 2003-Part 3 6 Runs Menu When you press OK, all the available runs appear in the window below  You can use the mouse to select a single run, or use the and keys to select and un-select runs the way you select and unselect files in Explorer

7. ExitTOC TIMSNT Introduction 2003-Part 3 7 Runs Menu  The run you selected will appear on your map

8. ExitTOC TIMSNT Introduction 2003-Part 3 8 Runs Menu You can Create run Delete run Reorder Services * Rename run Resequence * Insert, Assign, and Deassign Stops Insert Checkpoint * Edit Time at Stop Edit Headcounts Edit Loading Times Open Run Summaries View Run Directions You can also complete these functions in Tabular. * New in V9.2

9. ExitTOC TIMSNT Introduction 2003-Part 3 9 Generating Driver Directions

10. ExitTOC TIMSNT Introduction 2003-Part 3 10 What are Run Directions? The routes, composed of Garage Run(s), Deadhead Run(s) and Bus Run(s) are the outlines for the buses travel Run directions fill in the details of how this is going to happen in your district’s road network Run directions look for the fastest way to travel from point A to point B based on segment adjacencies, length, speed and direction Fine tuning these attributes through Maris or within Edulog.nt allow the data to reflect “real world” times and distances for your bus runs

11. ExitTOC TIMSNT Introduction 2003-Part 3 11 Directions for Loaded Runs First, we will look at the processes for working with loaded runs This does not include Garage or Deadhead portions of Routes

12. ExitTOC TIMSNT Introduction 2003-Part 3 12 Getting Started  Create a list of runs  You will want several – all runs, runs for each school  Load the one you want to work with as a work list

13. ExitTOC TIMSNT Introduction 2003-Part 3 13 Getting Started  Select list  Runs  Display  Select run or runs  Runs  Group processes  Directions

14. ExitTOC TIMSNT Introduction 2003-Part 3 14 Choose the list Select your list

15. ExitTOC TIMSNT Introduction 2003-Part 3 15 Parameters Check “Update Run Times” Decide whether or not to delete existing directions Delete = rebuild in PTS-III Begin processing

16. ExitTOC TIMSNT Introduction 2003-Part 3 16 Messages When processing is done, you will be given a message. If all runs processed… If they didn’t… You will see messages similar to what you have seen in PTS-III

17. ExitTOC TIMSNT Introduction 2003-Part 3 17 Generate Directions for a Run Select other runs from list or map with mouse Display a run or runs first (Runs>Display). To display directions Choose Runs>Graphical>Directions or click on

18. ExitTOC TIMSNT Introduction 2003-Part 3 18 Text Run Direction Display Select other run from list or map with mouse

19. ExitTOC TIMSNT Introduction 2003-Part 3 19 Hide the run graphic Unselect the run in the legend to simplify map

20. ExitTOC TIMSNT Introduction 2003-Part 3 20 Identifying Run Directions Select run directions: Map with mouse From list Scroll through run directions

21. ExitTOC TIMSNT Introduction 2003-Part 3 21 Identifying run segments The pink segment is the same segment highlighted in the text box.

22. ExitTOC TIMSNT Introduction 2003-Part 3 22 Gaps in Run Directions If gaps appear in the run directions, it is easy to fill them in by clicking on the “Add” button located at the bottom of the text box of run directions

23. ExitTOC TIMSNT Introduction 2003-Part 3 23 Filling in Run Direction Gaps The system will recommend a turn; click on Add + Next, confirm to fill in the gap

24. ExitTOC TIMSNT Introduction 2003-Part 3 24 Exercise: Test Your Knowledge  Create a list for 308 am runs  Load it as a work list  Generate run directions for your list  Display directions for run 308.003  Hide the run for 308.003 and all other runs and run directions  Practice changing the current run and identifying run directions from text and map.

25. ExitTOC TIMSNT Introduction 2003-Part 3 25 Adding a Stop Suppose you need to add a stop and put it onto a run…Stops >Graphical >Create or clicking gives you this screen to work with…….. Next, Select your School Multiple Stop Creation? Click Next Stop! Select this Mouse icon and click on the map location or…. type in the stops address here

26. ExitTOC TIMSNT Introduction 2003-Part 3 26 Creating a New Stop

27. ExitTOC TIMSNT Introduction 2003-Part 3 27 Inserting Stops on a Run With a run and stop displayed, choosing Stops >Graphical >Insert Stops or clicking gives the following menu….

28. ExitTOC TIMSNT Introduction 2003-Part 3 28 Inserting Stops 1. Pick the Stop 2. Pick the Run 3. Pick the Position All of these selections can be made from a pull down menu, or using the mouse option to select the items on the screen

29. ExitTOC TIMSNT Introduction 2003-Part 3 29 Inserting Stops The Stop has been added to the example!

30. ExitTOC TIMSNT Introduction 2003-Part 3 30 Deassigning Stops from a Run With a Run displayed, choose Stops >Graphical >Deassign Stop or click on to display this menu. Select the run Select the stop by Stop ID number or use the mouse and choose the stop Graphically.

31. ExitTOC TIMSNT Introduction 2003-Part 3 31 Deassigning Stops from a Run When you Click Confirm the Stop is Deassigned

32. ExitTOC TIMSNT Introduction 2003-Part 3 32 Runs Menu  Rename a run  View the route it is on  Insert a stop or school  Assign a stop or school  Deassign school or stop  Edit stop times  Headcount  Load Times  Reorder the stops  Resequence  Run Dir

33. ExitTOC TIMSNT Introduction 2003-Part 3 33 Creating Runs 1. Pick the Run Number With unassigned stops displayed you can use the Runs >Graphical >Create option or click to start a new run for a school. This menu appears….. Click OK when done 2. Pick the Destination Time

34. ExitTOC TIMSNT Introduction 2003-Part 3 34 Putting Stops on the Run Click OK when Finished The next window that appears is a very simple way to create the run sequence. You can use the mouse button on the window to select the first stop Use the “Next Stop” button to continue until all the stops are on then run.

35. ExitTOC TIMSNT Introduction 2003-Part 3 35 Putting Stops on Runs

36. ExitTOC TIMSNT Introduction 2003-Part 3 36 Run Summary A quick and easy way to get more information about the run is from the run summary window. With a run loaded select… Runs >Graphical >Open Run Summary or click on Button.

37. ExitTOC TIMSNT Introduction 2003-Part 3 37 Deleting a Run Before deleting a Run, you must deassign the stops from it first. Then with the Run displayed, choose Runs >Graphical >Delete or click to display this Menu…. Select the Run to delete and click OK You should get….

38. ExitTOC TIMSNT Introduction 2003-Part 3 38 Run Edit: Renaming Runs  To rename a run:  load the run in display mode  go to Runs-Graphical-Rename  Click OK  Load Run 308.005  Rename this run Practice

39. ExitTOC TIMSNT Introduction 2003-Part 3 39 Run Edit: Other Run Functions Copy Run can create a run identical to an existing run, with different destination times. Reverse Run creates a run identical to an existing run, only in reverse order. To use these functions:  Load Run  Go to Run-Group Processes  Select Copy or Reverse  Complete Copy or Reverse Run Dialogue Box  Click OK

40. ExitTOC TIMSNT Introduction 2003-Part 3 40 Tabular Runs Like Stops, there is a tabular runs feature in Edulog.nt Use Runs >Tabular to see the an individual run record

41. ExitTOC TIMSNT Introduction 2003-Part 3 41 Assigning Trips to Stop Services (Scheduling Trips) To schedule a trip:  Go to Student Display of Trips (Students-Tabular-Trips)  Highlight the trip and click Schedule Trip  Schedule by specific stop ID (enter the ID in the space  provided)  OR select “Active Stops,” “Active or Inactive Stops,” or “Create  Stop Services As Needed” and click OK  Select desired stop (use display to see location of  student and each stop as you highlight it)  Add “Distance to stop” to display  Click Assign Stop

42. ExitTOC TIMSNT Introduction 2003-Part 3 42 Assigning Trips to Stop Services (Scheduling Trips) Trips can also be assigned using Quick Assign.  Highlight trip and click Quick Assign.  Edulog NT automatically assigns trip to the closest stop, creating a service, if needed.

43. ExitTOC TIMSNT Introduction 2003-Part 3 43 Routes Menu

44. ExitTOC TIMSNT Introduction 2003-Part 3 44 Deadheads NEW: The system automatically creates a “deadhead” run between the end of the morning runs and the beginning of the afternoon runs If this is a different location than where the run ends, you will need to change this as well using the garage feature of route

45. ExitTOC TIMSNT Introduction 2003-Part 3 45 Deadheads Create garage location where you park buses, using the school location Add the garage location to the route This will link your runs together The system creates a “deadhead run” for these records and noted with a “-” symbol in the reports How To:

46. ExitTOC TIMSNT Introduction 2003-Part 3 46 Getting Started Create a list of routes Load the list you want to work with as a work list

47. ExitTOC TIMSNT Introduction 2003-Part 3 47 Processing Directions for Routes Routes>Group Processes>Directions Select list, set parameters Begin processing

48. ExitTOC TIMSNT Introduction 2003-Part 3 48 Results of Exercise Until you add garage runs, routes do not “link” together to give you the miles between trips.  Routes  Tabular  Worklist  Select list

49. ExitTOC TIMSNT Introduction 2003-Part 3 49 Route Timeline Edulog.nt does not have a graphic component to display routes as they are linked from garage runs to the first and last runs of the route A route timeline is available You can not obtain run directions using this component; only make run or time modifications

50. ExitTOC TIMSNT Introduction 2003-Part 3 50 Route Timeline The route timeline is accessed via

51. ExitTOC TIMSNT Introduction 2003-Part 3 51 Route Timeline Select Route Select and load a worklist You may have to reset the window times to display the timeline properly You may insert runs on routes, add garage runs and the other route functions here as well EXCEPT obtain run directions

52. ExitTOC TIMSNT Introduction 2003-Part 3 52 Route Timeline

53. ExitTOC TIMSNT Introduction 2003-Part 3 53 Options Menu  Configure Zoom Levels Adjust the amount of zoom per miles by adding a new zoom level or delete a zoom level. The New zoom level has been added

54. ExitTOC TIMSNT Introduction 2003-Part 3 54 Options Menu  Colors & Fonts Use this command to change the appearance of record windows opened in the Tabular mode.  Colors By School (new)  Save Temp Layers  Clear Saved Sessions Options

55. ExitTOC TIMSNT Introduction 2003-Part 3 55 Help Menu and About Edulog.nt  Type in your search

56. ExitTOC TIMSNT Introduction 2003-Part 3 56 Introduction to TIMSNT-Part3  Click Exit to leave the presentation. This concludes Part 3 of the training session. Please do one of the following:  Go back and review areas that interest you.