1. Oregon Robotics Tournament and Outreach Program RCX Basics

2. Program 1 b Motor wires attached to Ports A and C b Press the red On-Off button. What happens? b Press the Prgm button until a 1 appears b Put your robot on the floor and press the Run button. What happens? b Turn one of the motor wires 180 degrees and press the Run button. What happens?

3. Program 2 b Connect two touch sensors with long wires to Ports 1 and 3 b Turn on the RCX and select Program 2 b Put your robot on the floor and press Run. What happens? b Using the touch sensor on Port 1, push and hold the yellow button. What happens? b Do the same with the touch sensor on Port 3 b “Drive” your robot around the floor

4. Program 3 b Light sensor connected to Port 2 b Turn on the RCX and select Program 3 b Hold your robot and press the Run button b What happens as you move the light sensor between the white area and the black area below?