1. 1

2. 2 INDEX MAIN DISPLAYS3-4 SYSTEM LAYOUT 5-6 ROOM P-109 DISPLAY7 ROOM P-108 DISPLAY8 ROOM P-107 DISPLAY 9 ROOM P-106 DISPLAY 10 ROOM P-105 DISPLAY 11 ROOM P-104 DISPLAY 12 CHANGE SET POINTS 13-14 DATA TRENDING 15 ALARMS 16 A/C UNIT CONTROL 17

3. 3 This is the first display that it’s shown when you start the program. You have to Login to be able to access the other displays. Touch this button to Login. There are 3 types of accounts: Administrator Power User Guest Indicates User. Default is shown when nobody is logged in. MAIN DISPLAYS

4. 4 These buttons are shown once the user logs in. They allow access into other displays or to change the current user’s password. If this message is shown it means that one of the rooms’ alarm has been activated. (Refer to ALARMS button) MAIN DISPLAYS

5. 5 If a room is blinking red it means that the it’s alarm has been triggered. (Refer to ALARMS button) If the value changes from Green to Red it means that the alarm has been activated for this reason. (In this example the alarm is caused because of the temperature value) SYSTEM LAYOUT

6. 6 These buttons allow the Administrator or Power User to change the status of the system in each room. Touch these buttons to display the respective room page. Indicates room actual temperature and humidity reading. Key shows how each component works. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control. Touch these buttons to login or logout user. SYSTEM LAYOUT

7. 7 Lets user know in what room display he is in. Shows room actual temperature and humidity reading with their respective set points. Administrator can click on top of this area and it will direct him to the Change Set Point Display. These buttons allow the Administrator or Power User to change the status of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control. Touch these buttons to login or logout user. This button allows Administrator or Power User to turn ON/OFF the room lights when system is in Remote. ROOM P-109 DISPLAY The layout shows what’s happening in that room. Allows user to go directly to the system layout.

8. 8 Indicates if the room lights are ON/OFF. YELLOW = ON WHITE = OFF Switch will indicate if the room lights are ON/OFF. Allows to have more visibility of the Temperature and Humidity. ROOM P-108 DISPLAY The layout shows what’s happening in that room. Allows user to go directly to the system layout.

9. 9 ROOM P-107 DISPLAY The layout shows what’s happening in that room. Allows user to go directly to the system layout. If a room is blinking red it means that the room’s alarm is activated. (Refer to ALARMS button) If this message is shown it means that the room’s alarm is activated. (Refer to ALARMS button) These buttons allow Administrator or Power User to turn ON/OFF the Main Room or Security Room lights when system is in Remote. Lets user know in what room display he is in. These buttons allow the Administrator to change the status of the system. Shows room actual temperature and humidity reading with their respective set points. Administrator can click on top of this area and it will direct him to the Change Set Point Display. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control. Touch these buttons to Login or Logout user.

10. 10 ROOM P-106 DISPLAY These buttons allow Administrator or Power User to turn ON/OFF the Main Room or Security Room lights when system is in Remote. The layout shows what’s happening on that room. Allows user to go directly to the system layout. Shows room actual temperature and humidity reading with their respective set points. Administrator can click on top of this area and it will direct him to the Change Set Point Display. Lets user know in what room display he is in. These buttons allow the Administrator to change the status of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control. Touch these buttons to Login or Logout user.

11. 11 ROOM P-105 DISPLAY These buttons allow Administrator or Power User to turn ON/OFF the Main Room or Security Room lights when system is in Remote. The layout shows what’s happening on that room. Allows user to go direct to the system layout. Shows room actual temperature and humidity reading with their respective set points. Administrator can click on top of this area and it will direct him to the Change Set Point Display. Lets user know in what room display he is in. These buttons allow the Administrator to change the status of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control. Touch these buttons to Login or Logout user. Indicates if the room lights are ON/OFF. YELLOW = ON WHITE = OFF Touch this button to go to the Renewable Energy project.

12. 12 ROOM P-104 DISPLAY These buttons allow Administrator or Power User to turn ON/OFF the Main Room or Security Room lights when system is in Remote. The layout shows what’s happening in that room. YELLOW = LIGHTS ON WHITE = LIGHTS OFF RED = MOVEMENT SENSOR OFF WHITE = MOVEMENT SENSOR ON Allows user to go directly to the system layout. Shows room actual temperature and humidity reading with their respective set points. Administrator can click on top of this area and it will direct him to the Change Set Point Display. Lets user know in what room display he is in. These buttons allow the Administrator to change the status of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control. Touch these buttons to Login or Logout user. Indicates if the room lights are ON/OFF. YELLOW = ON WHITE = OFF

13. 13 CHANGE SET POINTS These buttons allow the Administrator to change the status of the system. System Map:. Allows to have more visibility of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display. Touch these buttons to login or logout user. Touch these buttons to display the respective room page. Shows week Temperature & Humidity Set Points for the different rooms. Shows weekend Temperature & Humidity Set Points for the different rooms. Shows Temperature & Humidity recommended set point values. Touch this button to restore default set point values. NOTE: Administrator is the only user with access to this display.

14. 14 If a room is blinking red it means that the room’s alarm is activated. (Refer to ALARMS button) Administrator can enter the new Set Point. CHANGE SET POINTS

15. 15 Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display. Touch these buttons to login or logout user. If this message is shown it means that the room’s alarm is activated. (Refer to ALARMS button) Shows rooms actual Temperature reading. Trends Temperature & Humidity values. DATA TRENDING It shows all the history of the Trending. Touch these buttons to display the respective room page.

16. 16 These buttons allow the Administrator to change the status of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display. Touch these buttons to login or logout user. Shows Alarms Summary. Actual Alarms are the ones blinking red and yellow. ALARMS System Map:. Allows to have more visibility of the system. Touch these buttons to display the respective room page. This button stops blinking the alarm, but doesn’t resolve it.

17. 17 A/C UNIT CONTROL This button allows Administrator turn ON/OFF the A/C unit in rooms P-109 through P-106. The four rooms needs to be in Remote Mode. These buttons let control the Variable Frequency Drive. System Map: Allows to have more visibility of the system. Touch these buttons to display the respective room page. These buttons allows the Administrator to change the status of the system. Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display. Touch these buttons to login or logout user. Indicates if the a/c is ON/OFF. YELLOW = ON WHITE = OFF