Presentation is loading. Please wait.

Presentation is loading. Please wait.

My ICT project By Syed Abdul Samad 7BB. My 2 Project Ideas My first idea was to build a remote control car, but soon afterwards I thought about building.

Published byEmory Lambert Wells Modified over 9 years ago

Similar presentations

Presentation on theme: "My ICT project By Syed Abdul Samad 7BB. My 2 Project Ideas My first idea was to build a remote control car, but soon afterwards I thought about building."— Presentation transcript:

1 My ICT project By Syed Abdul Samad 7BB

2 My 2 Project Ideas My first idea was to build a remote control car, but soon afterwards I thought about building a helicopter. I was confused between whether to do a helicopter or a car. This is why I would like to research further on these 2 topics.

3 Pros And Cons RC helicopter: Pros: It can take of vertically It is easy to fly It doesn’t make lots of noise It can be used indoors and outdoors It doesn’t pollute the air It can help you see things that are difficult to reach Cons: It is less exiting than petrol powered helicopters The flying time is limited. With the petrol powered helicopter, you can fly it till the petrol runs out which takes much longer. You can’t upgrade the engine. With the other type you can play around with the engine to enable more tricks.

4 Pros and Cons(Continued) RC car: Pros: Uses less battery than a RC Helicopter Is much more safer than a helicopter Easier to handle than a helicopter Less accuracy needed to drive it Cons: Not that challenging to drive Cannot drive on rough terrains Cannot remain stationary on water (helicopters can land on water) travels at a less speed

5 Materials needed Materials needed for a RC Helicopter:Materials Motor Chain Alaminium Transmitter Reciever Some kind of suspension Steering(can be hydrolics or the normal ordinary boring way (LOL) Wheels of a sort Remote control system Circuit board hardwood holder White plastic tube Measuring tube Gear Motor Screws Epoxy adhesive Carbon rods Drill Instant glue Balsa 1 ball bearing 1 plastic spacer Aluminum ball Aluminum ring Steel bar Propellers Metal ball Metal rob Tail blades Blade holder Balsa blades

6 References http://www.instructables.com/answers/I-want- to-build-a-rc-car-what-are-the-materials-/http://www.instructables.com/answers/I-want- to-build-a-rc-car-what-are-the-materials-/ http://www.streetdirectory.com/travel_guide/3 3602/hobbies/pros_and_cons_of_electric_rc_ helicopter.htmlhttp://www.streetdirectory.com/travel_guide/3 3602/hobbies/pros_and_cons_of_electric_rc_ helicopter.html

Download ppt "My ICT project By Syed Abdul Samad 7BB. My 2 Project Ideas My first idea was to build a remote control car, but soon afterwards I thought about building."

Similar presentations

RC Helicopter Mechanism 1 Sylvain Marron. 1: Mechanism Clutch Main Gear Tail Rotor Drive Swash Plate 2.

RC Helicopter Mechanism 1 Sylvain Marron. 1: Mechanism Clutch Main Gear Tail Rotor Drive Swash Plate 2.
 A radio controlled aircraft (model) is controlled remotely by a hand held transmitter & receiver within the aircraft.  The.

 A radio controlled aircraft (model) is controlled remotely by a hand held transmitter & receiver within the aircraft.  The.
Designing an Air-Propulsion System Presentation by – Jacob Griffin Advisor -Dr. Junkun Ma Senior Design Teacher -Dr. Cris Koutsougeras.

Designing an Air-Propulsion System Presentation by – Jacob Griffin Advisor -Dr. Junkun Ma Senior Design Teacher -Dr. Cris Koutsougeras.
What size is your carbon footprint? Making more electricity from your model wind turbine Is that possible? Would you like to produce more electricity from.

What size is your carbon footprint? Making more electricity from your model wind turbine Is that possible? Would you like to produce more electricity from.
Step 1: Tools & Components  This is a primer project which covers following concepts- 1.Power Supply.or 12v battery 2.DPDT switch operation. 3.DC.

Step 1: Tools & Components  This is a primer project which covers following concepts- 1.Power Supply.or 12v battery 2.DPDT switch operation. 3.DC.
AN-Najah National University Faculty Of Engineering Mechanical Engineering Department Graduation project2 1.

AN-Najah National University Faculty Of Engineering Mechanical Engineering Department Graduation project2 1.
Non-Renewable Pro: Already set up Con: Causes global warming.

Non-Renewable Pro: Already set up Con: Causes global warming.
 Petrol - “The first automotive combustion engines, so-called Otto engines, were developed in the last quarter of the 19th century in Germany.”  Diesel.

 Petrol - “The first automotive combustion engines, so-called Otto engines, were developed in the last quarter of the 19th century in Germany.”  Diesel.
Review Question Why should people conserve the resources in their communities?

Review Question Why should people conserve the resources in their communities?
Radio controlled vehicles

Radio controlled vehicles
How to support a shaft? The motor just turns the shaft. It doesn’t provide any support.

How to support a shaft? The motor just turns the shaft. It doesn’t provide any support.
Jessica Linus Engineering Foundations of Technology II February 16,2013 Mrs. Fitzpatrick.

Jessica Linus Engineering Foundations of Technology II February 16,2013 Mrs. Fitzpatrick.
LOVE M. GANDHI & SHANKHLA JITENDRA M.. eye power ROBOT with flying system guided by Mrs. VAISHALI CHAUDHARY Present ADVANCE GROUP eye power R RR ROBOT.

LOVE M. GANDHI & SHANKHLA JITENDRA M.. eye power ROBOT with flying system guided by Mrs. VAISHALI CHAUDHARY Present ADVANCE GROUP eye power R RR ROBOT.
+ Wind Energy: The Energy that Runs the World! Katie Kerwin, Maggie Malley, and Emily Nester 7B Group 7.

+ Wind Energy: The Energy that Runs the World! Katie Kerwin, Maggie Malley, and Emily Nester 7B Group 7.
Key Points: -Potential Energy is more formally called the Energy of Position or Stored Energy. Any object that is still or resting has Potential Energy.

Key Points: -Potential Energy is more formally called the Energy of Position or Stored Energy. Any object that is still or resting has Potential Energy.
Suspension and Steering Systems

Suspension and Steering Systems
 Carbon fiber reinforced plastic (CFRP or CRP) is a light-weight, high strength, composite material.  Depending on the task, carbon fiber reinforced.

 Carbon fiber reinforced plastic (CFRP or CRP) is a light-weight, high strength, composite material.  Depending on the task, carbon fiber reinforced.
Problem Statement Need to build a manually controlled robot capable of moving around and gripping and lifting objects. Basically we can divide this problem.

Problem Statement Need to build a manually controlled robot capable of moving around and gripping and lifting objects. Basically we can divide this problem.
By: Genaro Pina.  Hydrogen is used for energy because it doesn’t cause as much pollution as other normal ways that energy is used for today  Biomass.

By: Genaro Pina.  Hydrogen is used for energy because it doesn’t cause as much pollution as other normal ways that energy is used for today  Biomass.
Administrative Introduction Our goals for this project are for the three robots to work together intelligently to complete a maze faster than an individual.

Administrative Introduction Our goals for this project are for the three robots to work together intelligently to complete a maze faster than an individual.

Similar presentations

Ads by Google