1. Lesson 1 Gravity and Friction Lesson 2 Newton’s First Law
Chapter Introduction
Lesson 1 Gravity and Friction
Lesson 2 Newton’s First Law
Lesson 3 Newton’s Second Law
Lesson 4 Newton’s Third Law
Chapter Wrap-Up
Chapter Menu

2. How do forces change the motion of objects?
Chapter Introduction

3. What do you think?
Before you begin, decide if you agree or disagree with each of these statements. As you view this presentation, see if you change your mind about any of the statements.
Chapter Introduction

4. Do you agree or disagree?
1. You pull on objects around you with the force of gravity.
2. Friction can act between two unmoving, touching surfaces.
3. Forces acting on an object cannot be added.
Chapter Introduction

5. Do you agree or disagree?
4. A moving object will stop if no forces act on it.
5. When an object’s speed increases, the object accelerates.
6. If an object’s mass increases, its acceleration also increases if the net force acting on the object stays the same.
Chapter Introduction

6. Do you agree or disagree?
7. If objects collide, the object with more mass applies more force.
8. Momentum is a measure of how hard it is to stop a moving object.
Chapter Introduction

7. Lesson 1 Reading Guide - KC
Gravity and Friction
What are some contact forces and some noncontact forces?
What is the law of universal gravitation?
How does friction affect the motion of two objects sliding past each other?
Lesson 1 Reading Guide - KC

8. Lesson 1 Reading Guide - Vocab
Gravity and Friction
force
contact force
noncontact force
gravity
mass
weight
friction
Lesson 1 Reading Guide - Vocab

9. Types of Forces A push or a pull is called a force. force
An object or a person can apply a force to another object or person.
force
from Latin fortis, means “strong”
Lesson 1-1

10. Types of Forces (cont.)
A contact force is a force that is applied when two objects touch.
A force that one object can apply to another object without touching it is a noncontact force.
Gravity and magnetic force are examples of noncontact forces.
Lesson 1-1

11. Types of Forces (cont.)
What are some contact forces and some noncontact forces?
Lesson 1-1

12. What is gravity?
Gravity is an attractive force that exists between all objects that have mass.
Objects fall to the ground because Earth exerts gravity on them.
Mass is the amount of matter in an object.
Mass is often measured in kilograms (kg).
Lesson 1-2

13. The SI unit for force is the newton (N).
Arrows can be used to show both the strength and direction of force.
Lesson 1-1

14. What is gravity? (cont.)
Sir Isaac Newton developed the law of universal gravitation in the late 1600s.
The law of universal gravitation states that all objects are attracted to each other by a gravitational force.
Lesson 1-2

15. What is gravity? (cont.) What is the law of universal gravitation?
Lesson 1-2

16. What is gravity? (cont.)
The strength of gravitational force depends on the mass of each object and the distance between them.
When the mass of one or both objects increases, the gravitational force between them also increases.
When the distance between the two objects increases the gravitational force decreases
Lesson 1-2

17. What is gravity? (cont.)
Weight is the gravitational force exerted on an object.
Near Earth’s surface, an object’s weight is the gravitational force exerted on the object by Earth.
Because weight is a force, it is measured in newtons.
Lesson 1-2

18. What is gravity? (cont.)
An object’s weight is proportional to its mass.
Near Earth’s surface, the weight of an object in newtons is about ten times its mass in kilograms.
Lesson 1-2

19. Friction
Friction is a force that opposes the movement between two touching surfaces.
There are several types of friction.
static friction
sliding friction
fluid friction
Lesson 1-3

20. Friction (cont.) static Science Use at rest or having no motion
Common Use noise produced in a radio or television
Lesson 1-3

21. Friction (cont.)
Static friction prevents surfaces from sliding past each other.
Up to a limit, the strength of static friction changes to match the applied force.
Sliding friction opposes the motion of surfaces sliding past each other.
Lesson 1-3

22. Friction (cont.)
Fluid friction is friction between a surface and a fluid—any material, such as water or air, that flows.
Fluid friction between a surface and air is air resistance.
Lesson 1-3

23. Friction (cont.) What causes friction between surfaces?
When the microscopic dips and bumps on one surface catch the dips and bumps on another surface, the microscopic roughness slows sliding.
Atoms of opposite charges on opposite surfaces also slow sliding.
Lesson 1-3

24. Friction (cont.)
How does friction affect the motion of two objects sliding past each other?
Lesson 1-3

25. Reducing Friction
Lubricants decrease friction and with less friction, it is easier for surfaces to slide past each other.
Lesson 1-3

26. Forces can be either contact, such as a karate chop, or noncontact, such as gravity. Each type is described by its strength and direction.
Lesson 1 - VS

27. Gravity is an attractive force that acts between any two objects that have mass. The attraction is stronger for objects with greater mass.
Lesson 1 - VS

28. Friction can reduce the speed of objects sliding past each other
Friction can reduce the speed of objects sliding past each other. Air resistance is a type of fluid friction that slows the speed of a falling object.
Lesson 1 - VS

29. 1. You pull on objects around you with the force of gravity.
Do you agree or disagree?
1. You pull on objects around you with the force of gravity.
2. Friction can act between two unmoving, touching surfaces.
Lesson 1 - Now

30. Lesson 2 Reading Guide - KC
Newton’s First Law
What is Newton’s first law of motion?
How is motion related to balanced and unbalanced forces?
What effect does inertia have on the motion of an object?
Lesson 2 Reading Guide - KC

31. Lesson 2 Reading Guide - Vocab
Newton’s First Law
net force
balanced forces
unbalanced forces
Newton’s first law of motion
inertia
Lesson 2 Reading Guide - Vocab

32. Identifying Forces
The sum of all the forces acting on an object is the net force.
The net force depends on the directions of the forces applied to an object.
Because forces have direction, you have to specify a reference direction when you add forces.
Lesson 2-1

33. Identifying Forces (cont.)
A force moving in the reference direction is positive
A force in the opposite direction is negative.
Lesson 2-1

34. Identifying Forces (cont.)
The net force is the sum of the individual forces.
Lesson 2-1

35. Identifying Forces (cont.)
Balanced forces are forces that combine and form a net force of zero.
Forces that combine and form a net force that is not zero are unbalanced forces.
Lesson 2-1

36. Newton’s First Law of Motion
According to Newton’s first law of motion, if the net force on an object is zero:
an object at rest will stay at rest
a moving object will continue moving in a straight line with constant speed.
Balanced forces acting on an object do not change the object’s speed and direction.
Lesson 2-2

37. Newton’s First Law of Motion (cont.)
What is Newton’s first law of motion?
Lesson 2-2

38. Newton’s First Law of Motion (cont.)
Newton’s first law of motion only applies to balanced forces acting on an object.
When unbalanced forces act on an object, the object’s velocity changes.
Lesson 2-2

39. Newton’s First Law of Motion (cont.)
How is motion related to balanced and unbalanced forces?
Lesson 2-2

40. Newton’s First Law of Motion (cont.)
The tendency of an object to resist a change in its motion is called inertia.
inertia
from Latin iners, means “without skill, inactive”
Lesson 2-2

41. Newton’s First Law of Motion (cont.)
What effect does inertial have on the motion of an object?
Lesson 2-2

42. Why do objects stop moving?
For an object to start moving:
a force greater than static friction must be applied to it.
Lesson 2-3

43. Why do objects stop moving?
To keep an object in motion:
a force at least as strong as friction must be applied continuously.
Lesson 2-3

44. Why do objects stop moving?
Objects stop moving because friction or another force acts on them.
Lesson 2-3

45. Unbalanced forces cause an object to move.
According to Newton’s first law of motion, if the net force on an object is zero, the object’s velocity does not change.
Inertia is a property that resists a change in the motion of an object.
Lesson 2 - VS

46. 3. Forces acting on an object cannot be added.
Do you agree or disagree?
3. Forces acting on an object cannot be added.
4. A moving object will stop if no forces act on it.
Lesson 2 - Now

47. Lesson 3 Reading Guide - KC
Newton’s Second Law
What is Newton’s second law of motion?
How does centripetal force affect circular motion?
Lesson 3 Reading Guide - KC

48. Lesson 3 Reading Guide - Vocab
Newton’s Second Law
Newton’s second law of motion
circular motion
centripetal force
Lesson 3 Reading Guide - Vocab

49. How do forces change motion?
Forces change an object’s motion by changing its speed, its direction, or both its speed and its direction.
Velocity is speed in a certain direction.
Acceleration is a change in velocity.
Only unbalanced forces change an object’s velocity.
Lesson 3-1

50. How do forces change motion? (cont.)
When unbalanced forces act on an object at rest:
the object begins moving in the direction of the net force.
If the net force acting on a moving object is in the direction that the object is moving, the object will speed up.
If the direction of the net force on an object is opposite to the direction the object moves, the object slows down.
Lesson 3-1

51. Newton’s Second Law of Motion
According to Newton’s second law of motion, the acceleration of an object is equal to the net force acting on the object divided by the object’s mass.
Lesson 3-2

52. Lesson 3-2

53. Newton’s Second Law of Motion (cont.)
The direction of acceleration is the same as the direction of the net force.
Acceleration is expressed in meters per second squared (m/s2), mass in kilograms (kg), and force in newtons (N).
Lesson 3-2

54. Circular Motion
Circular motion is any motion in which an object is moving along a curved path.
In circular motion, a force that acts perpendicular to the direction of motion, toward the center of the curve, is centripetal force.
Lesson 3-3

55. Circular Motion (cont.)
centripetal
from Latin centripetus, means “toward the center”
Lesson 3-3

56. Circular Motion (cont.)
Lesson 3-3

57. Circular Motion (cont.)
How does centripetal force affect circular motion?
Lesson 3-3

58. Circular Motion (cont.)
A satellite is an object that orbits a larger object.
A satellite tends to move along a straight path because of inertia.
Gravity is the centripetal force that keeps a satellite in orbit by changing its direction.
Lesson 3-3

59. Unbalanced forces cause an object to speed up, slow down, or change direction.
Lesson 3 - VS

60. Newton’s second law of motion relates an objects acceleration to its mass and the net force on the object.
Lesson 3 - VS

61. Any motion in which an object is moving along a curved path is circular motion.
Lesson 3 - VS

62. 5. When an object’s speed increases, the object accelerates.
Do you agree or disagree?
5. When an object’s speed increases, the object accelerates.
6. If an object’s mass increases, its acceleration also increases if the net force acting on the object stays the same.
Lesson 3 - Now

63. Lesson 4 Reading Guide - KC
Newton’s Third Law
What is Newton’s third law of motion?
Why don’t the forces in a force pair cancel each other?
What is the law of conservation of momentum?
Lesson 4 Reading Guide - KC

64. Lesson 4 Reading Guide - Vocab
Newton’s Third Law
Newton’s third law of motion
force pair
momentum
law of conservation of momentum
Lesson 4 Reading Guide - Vocab

65. Newton’s Third Law of Motion
According to Newton’s third law of motion, when one object applies a force on a second object, the second object applies an equal force in the opposite direction on the first object.
What is Newton’s third law of motion?
Lesson 4-2

66. Newton’s Third Law of Motion (cont.)
A force pair is the forces two objects apply to each other.
always act in opposite directions
always the same strength
do not cancel each other out because each force acts on a different object
Adding forces can only result in a net force of zero if the forces act on the same object.
Lesson 4-2

67. Newton’s Third Law of Motion (cont.)
Why don’t the forces in a force pair cancel each other?
Lesson 4-2

68. Newton’s Third Law of Motion (cont.)
In a force pair, one force is called the action force and the other force is called the reaction force.
When you push against an object, the force you apply is called the action force.
The force applied by the object back against you is called the reaction force.
Lesson 4-2

69. Momentum
Momentum is a measure of how hard it is to stop a moving object.
momentum
from Latin momentum, means “movement, impulse”
Lesson 4-4

70. Momentum (cont.)
Momentum is the product of an object’s mass and velocity.
Lesson 4-4

71. Lesson 4-4

72. Momentum (cont.)
An object’s momentum is in the same direction as its velocity.
According to Newton’s first law, if the net force on an object is zero, neither its velocity nor its momentum change.
Because momentum is the product of mass and velocity, the force on an object equals its change in momentum.
Lesson 4-4

73. Conservation of Momentum
According to the law of conservation of momentum, the total momentum of a group of objects stays the same unless outside forces such as friction act on the objects.
What is the law of conservation of momentum?
Lesson 4-5

74. Conservation of Momentum (cont.)
When colliding objects:
bounce off each other, it is an elastic collision.
stick together, the collision is inelastic.
No matter the type of collision, the total momentum will be the same before and after the collision.
Lesson 4-5

75. Conservation of Momentum (cont.)
Lesson 4-5

77. In any collision, momentum is transferred from one object to another.
Newton’s third law of motion describes the force pair between two objects.
For every action force, there is a reaction force that is equal in strength but opposite in direction.
In any collision, momentum is transferred from one object to another.
Lesson 4 - VS

78. 7. If objects collide, the object with more mass applies more force.
Do you agree or disagree?
7. If objects collide, the object with more mass applies more force.
8. Momentum is a measure of how hard it is to stop a moving object.
Lesson 4 - Now

79. Interactive Concept Map Chapter Review Standardized Test Practice
Key Concept Summary
Interactive Concept Map
Chapter Review
Standardized Test Practice
Chapter Review Menu

80. An object’s motion changes if a net force acts on the object.
The BIG Idea

81. Lesson 1: Gravity and Friction
Friction is a contact force. Magnetism is a noncontact force.
The law of universal gravitation states that all objects are attracted to each other by gravity.
Friction can stop or slow down objects sliding past each other.
Key Concepts 1

82. Lesson 2: Newton’s First Law
An object’s motion can only be changed by unbalanced forces.
According to Newton’s first law of motion, the motion of an object is not changed by balanced forces acting on it.
Inertia is the tendency of an object to resist a change in its motion.
Key Concepts 2

83. Lesson 3: Newton’s Second Law
According to Newton’s second law of motion, an object’s acceleration is the net force on the object divided by its mass.
In circular motion, a centripetal force pulls an object toward the center of the curve.
Key Concepts 3

84. Lesson 4: Newton’s Third Law
Newton’s third law of motion states that when one object applies a force on another, the second object applies an equal force in the opposite direction on the first object.
The forces of a force pair do not cancel because they act on different objects.
According to the law of conservation of momentum, momentum is conserved during a collision unless an outside force acts on the colliding objects.
Key Concepts 4