1. Parts Management Reengineering Implementation Team Major Recommendation: Make Parts Management a Policy and Contractual Requirement. DSPO Consultant

2. PMRIPT / Policy & Contractual Requirement  Team Members / AMRDEC / Lockheed / DSCC / NAVAIR / DSPO / DSPO Consultant / Boeing / LMI

3. PMRIPT / Policy & Contractual Requirement / Major Tasks  Policy Memo  DODI 4120.19, Parts Management Program, Draft  MIL-STD-3018, Parts Management, (Project #SDMP-2006-002)  SD-19, Life Cycle Cost Savings, Through Parts Management  Distance Learning Module

4. PMRIPT / Policy & Contractual Requirement  MIL-STD-3018, Parts Management, (Project #SDMP-2007-004) General Requirements  Comprehensive Parts Management Program.  Contractors shall provide a parts management plan. Detail Requirements  Parts Management Elements Parts Selection baseline Part Selection/Authorization Process Obsolescence Management BOM/Parts List Submissions (as required by contract) Subcontractor Management Part & Supplier Quality Part Documentation Procedures Substitute/Alternate Part Procedures Customer/Contractor Teaming Additional Elements

5. PMRIPT / Policy & Contractual Requirement  MIL-STD-3018, Parts Management, (Project #SDMP- 2006-002) Parts Selection/Order of Preference  Parts Required to meet Government Requirements  Industry Standard Parts from DOD adopted nongovernment standards, when suitable.  Military & Government standard parts.  DOD commonly available parts.  Industry Standard Parts from other nongovernment standards, when suitable.  Commonly available manufacturers part numbers from catalogs and/or Vendor Item Drawings, when suitable.  Parts documented on Source Control Drawings, Selected Item Drawings, Altered Item Drawings, etc.

6. PMRIPT / Policy & Contractual Requirement  SD-19, Life Cycle Coat Savings, Through Parts Mgmt. Parts Management Overview Overview of Contract & Contract Requirements Elements of a Parts Management Program Parts Management Approaches Commonly Used Parts by Categories General Information for Part & Supplier Qualification  Distance Learning Module (Executive Level) Benefits of Parts Management Policy and Policy Documents Contractual Implementation

7. PMRIPT / Policy & Contractual Requirement / PSMC Tasking Recommendations  Policy Memo (DSPO)  DODI 4120.19 (DSPO to Implement Memo Policy) Service Instructions  Service Command Instructions  MIL-STD-3018 Parts Management (PSMC over time will recommend changes for revision A – Contracting and Policy Subcommittee)  SD-19 Life Cycle Cost Savings Through Parts Management (PSMC to update – Documentation and Education Subcommittee)  Distance Learning Module (PSMC to provide updated content by February 1, 2008 – Documentation and Education Subcommittee)

8. PMRIPT / Policy & Contractual Requirement  QUESTIONS