1. © 2012 Autodesk Parametrics Master Class Martin Duke Business Systems Manager

2. © 2012 Autodesk Parametrics  First introduced in 2010  Refined further in 2011  Most important new feature in ten years  Takes time to master  Solution, looking for a problem  Allow the user to explore complex geometric problems  Add intelligence to drawings

3. © 2012 Autodesk Underlying concepts  Works on the concept of constraining geometry  Geometry can be in one of three states  Under constrained  Fully constrained – where we want to be!  Over constrained

4. © 2012 Autodesk Constraints  Constraints are the gears that make it work  Two types of constraints  Geometric  Dimensional  They work together.

5. © 2012 Autodesk Geometric Constraints  On the Parametrics panel  Twelve geometric Constraints  Each react differently and work with different objects.

6. © 2012 Autodesk Same, same but different  Understand your goal  Three examples here, all look similar but are different.

7. © 2012 Autodesk Auto Constrain  Effective first pass tool  Change it’s parameters with CONSTRAINTSETTINGS

8. © 2012 Autodesk Dimensional Constraints  Quantitatively define relationships between objects  Looks like a dimension but behave differently  Six different constraints

9. © 2012 Autodesk Usage  Can be applied to objects or constraint points  Two different type of dimensional constraints  Dynamic  Annotational  Dynamic – style neutral, scale automatically  Annotational – similar to normal dimension  Controlled by the CONSTRAINTFORM system variable

10. © 2012 Autodesk Reference Constraints  Doesn’t affect geometry  Indicated by enclosing parenthesis

11. © 2012 Autodesk Inferred constraints  Constrain as you go  Can be toggled on/off with the CONSTRAINTINFER system variable  Also with the taskbar

12. © 2012 Autodesk Paramters Manager  Every dimensional constraint appears in the manager  Use to manage all variables  Can enter user parameters  Expressions

13. © 2012 Autodesk Worked Example  Create a line  Add geometric constraints  Add dimensional constraints  Use construction lines  Drive it with Parameters manager

14. © 2012 Autodesk Dynamic Blocks  Geometric and Dimensional Constraints available in Block editor  Construction lines  Same methodology  Look up tables

15. © 2012 Autodesk Design or document  Obvious usage in design development  Can be used in Paperspace to help organise your drawing

16. © 2012 Autodesk Three examples  Roundabout and section  Mechanical component  Drawing

17. © 2012 Autodesk Key Strategies  Understand your geometry and the interaction you want it to perform.  Use the tools such as Auto Constrain and Infer Constraints to do the initial work for you.  Use logical names for important dimensional constraints.  Use Parameter Groups to isolate those parameters that the user should interact with.  Toggle the display of constraints on/off to de-clutter the display  Test the model frequently to ensure that it behaves as expected.  Use formulas in constraints to calculate values rather than hard coding them

18. © 2012 Autodesk Questions?

19. © 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.