2. My tītīr ā ina

3. The stabilizer The sail The mast The rudder

4. 1 stick 1 green leaf Requirements: 4 « ni’au » (coconut midrib)

5. The different steps

6. cut the stick diagonally to make the bow Step 1

7. Punch three holes and insert the « ni’au » The » ni’au » The leaf To make the sail Step 2

8. Punch a hole in the stick towards the bow and insert the sail mast. Step 3

9. Insert the end of the sail mast into the stern Step 4

10. The stern The sail Insert another « niau » into the stern for the rudder Step 5

11. The sail The bow The stabilizer Insert a« ni’au » on each side of the stick for stabilization Step 6

12. The stabilizer The sail The mast My « tītīrāina » The stern The bow The rudder