Download presentation
Presentation is loading. Please wait.
Published byGwenda Perkins Modified over 9 years ago
1
Technician License Course Chapter 7 Lesson Module 16: Licensing Regulations: Bands and Privileges
2
What can you do with a Technician Class License? Power limits. Always use the minimum power required to get the job done. Up to 1500 watts peak envelope power (PEP). –Will generally require an external amplifier to achieve these power levels. Some special cases where power is restricted. Some bands or portions of bands.
3
What can you do with a Technician Class License? Frequency Privileges: –Band versus frequency.
4
What can you do with a Technician Class License?
5
Emission Privileges:
6
Primary and Secondary Allocations Some authorized amateur frequencies are shared. –Primary Users. –Secondary Users cannot interfere with Primary Users, and must accept interference from Primary Users.
7
Frequency Coordination Repeaters usually require coordination to prevent mutual interference. Coordinated repeaters may have a preference in frequency disputes between repeaters. Local Amateurs may form Repeater Coordination bodies, that help make sure that interference is minimized. NARCC – Northern Area Repeater Coordination Council ( Northern California)
8
Mode Restricted Sub-Bands 50.0 to 50.1 MHz CW Only 144.0 to 144.1 MHz CW Only 219 to 220 MHz Data (Digital Store and Forward Systems) Only
9
Which of the following entities recommends transmit/receive channels and other parameters for auxiliary and repeater stations? (T1A08) A. Frequency Spectrum Manager B. Frequency Coordinator C. FCC Regional Field Office D. International Telecommunications Union
10
Which of the following entities recommends transmit/receive channels and other parameters for auxiliary and repeater stations? (T1A08) A. Frequency Spectrum Manager B. Frequency Coordinator C. FCC Regional Field Office D. International Telecommunications Union
11
Who selects a Frequency Coordinator? (T1A09) A. The FCC Office of Spectrum Management and Coordination Policy B. The local chapter of the Office of National Council of Independent Frequency Coordinators C. Amateur operators in a local or regional area whose stations are eligible to be auxiliary or repeater stations D. FCC Regional Field Office
12
Who selects a Frequency Coordinator? (T1A09) A. The FCC Office of Spectrum Management and Coordination Policy B. The local chapter of the Office of National Council of Independent Frequency Coordinators C. Amateur operators in a local or regional area whose stations are eligible to be auxiliary or repeater stations D. FCC Regional Field Office
13
Which frequency is within the 6 meter band? (T1B03) A. 49.00 MHz B. 52.525 MHz C. 28.50 MHz D. 222.15 MHz
14
Which frequency is within the 6 meter band? (T1B03) A. 49.00 MHz B. 52.525 MHz C. 28.50 MHz D. 222.15 MHz
15
Which amateur band are you using when your station is transmitting on 146.52 MHz? (T1B04) A. 2 meter band B. 20 meter band C. 14 meter band D. 6 meter band
16
Which amateur band are you using when your station is transmitting on 146.52 MHz? (T1B04) A. 2 meter band B. 20 meter band C. 14 meter band D. 6 meter band
17
Which 70 cm frequency is authorized to a Technician Class license holder operating in ITU Region 2? (T1B05) A. 53.350 MHz B. 146.520 MHz C. 443.350 MHz D. 222.520 MHz
18
Which 70 cm frequency is authorized to a Technician Class license holder operating in ITU Region 2? (T1B05) A. 53.350 MHz B. 146.520 MHz C. 443.350 MHz D. 222.520 MHz
19
Which 23 cm frequency is authorized to a Technician Class operator license? (T1B06) A. 2315 MHz B. 1296 MHz C. 3390 MHz D. 146.52 MHz
20
Which 23 cm frequency is authorized for a Technician Class operator license? (T1B06) A. 2315 MHz B. 1296 MHz C. 3390 MHz D. 146.52 MHz
21
What amateur band are you using if you are transmitting on 223.50 MHz? (T1B07) A. 15 meter band B. 10 meter band C. 2 meter band D. 1.25 meter band
22
What amateur band are you using if you are transmitting on 223.50 MHz? (T1B07) A. 15 meter band B. 10 meter band C. 2 meter band D. 1.25 meter band
23
What do the FCC rules mean when an amateur frequency band is said to be available on a secondary basis? (T1B08) A. Secondary users of a frequency have equal rights to operate B. Amateurs are only allowed to use the frequency at night C. Amateurs may not cause harmful interference to primary users D. Secondary users are not allowed on amateur bands
24
What do the FCC rules mean when an amateur frequency band is said to be available on a secondary basis? (T1B08) A. Secondary users of a frequency have equal rights to operate B. Amateurs are only allowed to use the frequency at night C. Amateurs may not cause harmful interference to primary users D. Secondary users are not allowed on amateur bands
25
Which of the bands available to Technician Class operators have mode-restricted sub- bands? (T1B10) A. The 6 meter, 2 meter, and 70 cm bands B. The 2 meter and 13 cm bands C. The 6 meter, 2 meter and 1.25 meter bands D. The 2 meter and 70 cm bands
26
Which of the bands available to Technician Class operators have mode-restricted sub- bands? (T1B10) A. The 6 meter, 2 meter, and 70 cm bands B. The 2 meter and 13 cm bands C. The 6 meter, 2 meter and 1.25 meter bands D. The 2 meter and 70 cm bands
27
Which emission modes are permitted in the mode-restricted sub-bands at 50.0 to 50.1 MHz and 144.0 to 144.1 MHz? (T1B11) A. CW only B. CW and RTTY C. SSB only D. CW and SSB
28
Which emission modes are permitted in the mode-restricted sub-bands at 50.0 to 50.1 MHz and 144.0 to 144.1 MHz? (T1B11) A. CW only B. CW and RTTY C. SSB only D. CW and SSB
29
What must you do if you are operating on the 23 cm band and learn that you are interfering with a radiolocation station outside of the United States? (T1C05) A. Stop operating or take steps to eliminate the harmful interference B. Nothing because the band is allocated exclusively to the amateur service C. Establish contact with the radiolocation station and ask them to change frequency D. Change to CW mode, because this would not likely cause interference
30
What must you do if you are operating on the 23 cm band and learn that you are interfering with a radiolocation station outside of the United States? (T1C05) A. Stop operating or take steps to eliminate the harmful interference B. Nothing because the band is allocated exclusively to the amateur service C. Establish contact with the radiolocation station and ask them to change frequency D. Change to CW mode, because this would not likely cause interference
31
What is a band plan, beyond the privileges established by the FCC? (T2A10) A. A voluntary guideline for using different modes or activities within an amateur band B. A mandated list of operating schedules C. A list of scheduled net frequencies D. A plan devised by a club to use a frequency band during a contest
32
What is a band plan, beyond the privileges established by the FCC? (T2A10) A. A voluntary guideline for using different modes or activities within an amateur band B. A mandated list of operating schedules C. A list of scheduled net frequencies D. A plan devised by a club to use a frequency band during a contest
33
What are the FCC rules regarding power levels used in the amateur bands? (T2A11) A. Always use the maximum power allowed to ensure that you complete the contact B. An amateur may use no more than 200 watts PEP to make an amateur contact C. An amateur may use up to 1500 watts PEP on any amateur frequency D. An amateur must use the minimum transmitter power necessary to carry out the desired communication
34
What are the FCC rules regarding power levels used in the amateur bands? (T2A11) A. Always use the maximum power allowed to ensure that you complete the contact B. An amateur may use no more than 200 watts PEP to make an amateur contact C. An amateur may use up to 1500 watts PEP on any amateur frequency D. An amateur must use the minimum transmitter power necessary to carry out the desired communication
35
Which of the following emission modes may be used by a Technician Class operator between 219 and 220 MHz? (T8D05) A. Spread spectrum B. Data C. SSB voice D. Fast-scan television
36
Which of the following emission modes may be used by a Technician Class operator between 219 and 220 MHz? (T8D05) A. Spread spectrum B. Data C. SSB voice D. Fast-scan television
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.