Presentation is loading. Please wait.

Presentation is loading. Please wait.

Ch 5. MAC in WMNs Myungchul Kim –Wireless routers called wireless mesh points (MPs) –MAC protocols with omni directional antennas for.

Similar presentations


Presentation on theme: "Ch 5. MAC in WMNs Myungchul Kim –Wireless routers called wireless mesh points (MPs) –MAC protocols with omni directional antennas for."— Presentation transcript:

1 Ch 5. MAC in WMNs Myungchul Kim mckim@icu.ac.kr

2 –Wireless routers called wireless mesh points (MPs) –MAC protocols with omni directional antennas for sharing a single channel: Aloha, Slotted Aloha, CSMA, CSMA/CA –IEEE 802.11 MAC and IEEE 802.11e MAC: single channel –Directional antennas –Multiple channels at mesh nodes –IEEE 802.11b: three orthogonal channels could be used simultaneously in a neighborhood without interfering. Introduction

3 –Control and management of WMNs have to be distributed across all nodes. –Distributed MAC, distributed channel selection and/or channel assignment –Multihop transmission: hidden node problem and exposed node problem Design objectives and challenges

4

5 –Directional antennas or a multichannel MAC protocol may suffer from a deafness problem –Dyanmic nature: variations in link quality, changing congestion levels, and user mobility –Error-prone nature of wireless channels Design objectives and challenges

6 –Contention-based protocols vs collision-free channel partition protocols Aloha and slotted aloha Conventional wireless MAC protocols

7 CSMA and CSMA/CA –CSMA –CSMA/CA Hidden node problem RTS/CTS Collision? IEEE 802.11 DCF protocol –Distributed coordination function (DCF) on CSMA/CA –Point coordination funtion (PCF) on CSMA/CA –Distributed inter frame space (DIFS) –Short inter frame space (SIFS) –Network allocation vector (NAV) Conventional wireless MAC protocols

8 IEEE 802.11 DCF protocol Conventional wireless MAC protocols

9 IEEE 802.11e MAC protocol –Define the channel access functions and the traffic specification (TSPEC) management –Channel access function -> hybrid coordination function (HCF) A contention-based protocol called enhanced distributed channel access (EDCA) A polling mechanism called HCF controlled channel access (HCCA): central control Conventional wireless MAC protocols

10 IEEE 802.11e MAC protocol –EDCA: enhance the original DCF by providing prioritized medium access based on different traffic classes, access categories (ACs) –TXOP: a bounded time interval in which a node is allowed to transmit a series of frames. Conventional wireless MAC protocols

11 IEEE 802.11e MAC protocol Conventional wireless MAC protocols

12 IEEE 802.11e MAC protocol Conventional wireless MAC protocols

13 Protocols for mesh nodes equipped with directional antennas –Spatial reuse –New MAC –A different kind of hidden node problem, a deafness problem, and a higher directional interference Advanced MAC protocols for WMNs

14 Protocols for mesh nodes equipped with directional antennas –Directional MAC (D-MAC) CTS is transmitted omnidirectionally to reduce the number of hidden nodes Or RTS packets are sent omnidirectionally –Tone-based directional MAC (Tone MAC) Use omnidirectional out-of-band tones to indicate deafness to blocked transmitter After a DATA/ACK, send out tones to indicate that they were recently engaged in communication. –Directional virtual carrier sensing (DCVS) Caching the angle of arrival, beam locking and unlocking, and use of directional NAV Advanced MAC protocols for WMNs

15 Protocols for mesh nodes equipped with directional antennas –Circular directional RTS Inform the neighbors about the intended transmissions –Exploit the benefits of beam-forming Advanced MAC protocols for WMNs

16 Protocols for mesh nodes equipped with directional antennas Advanced MAC protocols for WMNs

17 Multichannel MAC protocols –Channel selection techniques Handshake-based channel selection Channel hopping Cross-layer channel assignment Common control channel or not One transmitter and multiple receivers One transceiver Advanced MAC protocols for WMNs

18 Multichannel MAC protocols –Handshake-based channel selection Dynamic channel assignment (DCA) –One control channel and n euqivalent data channels –All nodes with a channel usage list (CUL) and a free channel list (FCL) –RTS with FCL, CTS with the channel to use and RES through control channel Advanced MAC protocols for WMNs

19 Multichannel MAC protocols –Handshake-based channel selection Multichannel CSMA MAC –Similar to DCA Multichannel MAC (MMAC) –Becon intervals –The first interval for channel negotiation and the second for data packets –Ad hoc traffic indication message (ATIM) window –Common control channel –Prefearable channel list (PCL) –All channel negotiation occur in ATIM windows over the common control channel. –RTS, CTS, ACK and data are all transmitted on the negotiated data channel. Advanced MAC protocols for WMNs

20 Multichannel MAC protocols –Handshake-based channel selection Multichannel MAC (MMAC) –Stringent syncronized requirements –No broadcasting –the channel negotiation in on a per-packet basis -> high control overhead Advanced MAC protocols for WMNs

21 Multichannel MAC protocols –Channel hopping Receiver-initiated channel-hop with dual polling (RICH-DP) –All nodes in a network follow a common channel-hopping sequence and each hop lasts just long enough for the nodes to receive a collision-avoidance control packet from a neighbor. Slotted seeded channel hopping (SSCH) –No dedicated control channel and clock sysncronization among nodes Advanced MAC protocols for WMNs

22 Multichannel MAC protocols –Cross-layer channel assignment Combing channel assignment with the routing protocol -> simple MAC Seperation of channel assignments and MAC One common control channel and multiple data channels Nodes are assigned data channels by the routing protocol All channel assignments are piggybacked onto routing protocol messages -> lower communication overhead Advanced MAC protocols for WMNs

23 Multichannel MAC protocols –Cross-layer channel assignment RTS and CTS with data channel index Advanced MAC protocols for WMNs

24 Multichannel MAC protocols –Cross-layer channel assignment Combining routing with intelligent channel assignment -> a factor of 6 to 7 throuput improvement compared to a conventional single-channel scheme Advanced MAC protocols for WMNs

25

26 Contention-free MAC protocols for synchronized mesh networks –IEEE 802.16, WiMax –Point to multipoint and mesh network –TDMA –Connection oriented –Subscriber station (SS), connection ID (CID), base station (BS) –The MAC layer schedules the usage of the airlink resources and provide QoS differentiation Advanced MAC protocols for WMNs

27 Contention-free MAC protocols for synchronized mesh networks Advanced MAC protocols for WMNs

28 –802.11e, 11i and 11k for one-hop wireless networks Intramesh congestion control –End-to-end flow control at the transport layer? Multimedia application over UDP TCP congestion control does not work well across a multihop wireless network Advanced MAC features proposed by the 802.11 TDs group

29 Intramesh congestion control –Hop-by-hop congestion control mechanism that operates at the data link layer Broadcast “neighborhood congestion announcement” and/or unicast “congestion control request” Detecting congestion –Monitor effective MAC transmission and receiving rate for the packets to be forwarded –Monitor queue size Advanced MAC features proposed by the 802.11 TDs group

30 Common channel framework –Simultaneous transmissions on multiple channels –Request-to-switch (RTX) and clear-to-switch (CTX) Advanced MAC features proposed by the 802.11 TDs group

31 Mesh deterministic access –Better QoS –Contention-free time period: MDA opportunity (MDAOP) –Set up procedure for an MADOP set Advanced MAC features proposed by the 802.11 TDs group


Download ppt "Ch 5. MAC in WMNs Myungchul Kim –Wireless routers called wireless mesh points (MPs) –MAC protocols with omni directional antennas for."

Similar presentations


Ads by Google