Presentation is loading. Please wait.

Presentation is loading. Please wait.

Performance Transformation Culture STANDARDIZATION OF ENHANCED PLASTIC MICROCIRCUITS FOR MILITARY APPLICATIONS Thomas Hess DSCC Chief, Active Devices Team.

Published byMartha Doyle Modified over 9 years ago

Similar presentations

Presentation on theme: "Performance Transformation Culture STANDARDIZATION OF ENHANCED PLASTIC MICROCIRCUITS FOR MILITARY APPLICATIONS Thomas Hess DSCC Chief, Active Devices Team."— Presentation transcript:

1 Performance Transformation Culture STANDARDIZATION OF ENHANCED PLASTIC MICROCIRCUITS FOR MILITARY APPLICATIONS Thomas Hess DSCC Chief, Active Devices Team March 9, 2005

2 Performance Transformation Culture MICROCIRCUIT PROGRAM HISTORY MIL-M-38510 QPL PROGRAM – INACTIVATED 27 AUG 1993 – No Plastics devices MIL-PRF-38535 QML PROGRAM – CLASS N – FIRST ATTEMPT – EXTENDED TEMPERATURE, MILITARY TESTING TO COSTLY STANDARD MICROCIRCUIT DRAWINGS – STANDARD PROCUREMENT DOCUMENT FOR MIL-PRF-38535 DEVICES

3 Performance Transformation Culture NOW WHAT? REQUESTED BY USER COMMUNITY ELECTRONICS INDUSTRIES ALLIANCE (EIA) G-12 COMMITTEE 5 YEAR EFFORT TO GET AGREEMENT ON MIMIMUM CHARACTERISTICS COVERS MANUFACTURERS ENHANCED PLASTIC DEVICES NOT APPROPRIATE FOR ALL APPLICATIONS

4 Performance Transformation Culture PROGRAM REQUIREMENTS MINIMAL ADDITIONAL COST - USERS AVAILABLE QUALIFICATION AND RELIABILITY DATA – USERS CHANGE NOTIFICATION – USERS COMMERCIAL PLUS – USERS CONTROLLED BASELINE - USERS NO EXTRAS – VENDORS NO ADDITIONAL MARKING – VENDORS SINGLE P. O. C. – BOTH

5 Performance Transformation Culture STANDARD PROCUREMENT DOCUMENT OPTIONS SLASH SHEETS, STANDARD MICROCIRCUIT DRAWINGS TRADITIONAL DSCC DRAWINGS COMMERCIAL ITEM DESCRIPTIONS NON-GOVERNMENT STANDARDS VENDOR ITEM CONTROL DRAWINGS (VIDs)

6 Performance Transformation Culture HOW DID WE GET HERE DSCC Matrix of Document Options DocumentFunctionControlling Document Controlling PIN Sources Slash sheets, SMDsDocument military QPL/QML devicesSlash sheet, SMD MilitaryQML/QPL DSCC Drawing – Selected Item, Source Control Documents military grade parts that are not qualified Drawing Approved or Suggested Commercial Item Descriptions (CID) Documents commercial off-the-shelf parts. CID A-A-xxxxx Open Non-government Standards (NGS) Documents parts developed under the consensus procedures of private sector standards organizations. NGS No QPL system for ICs DSCC Vendor Item Drawing (VID) Documents an off-the-shelf data sheet part VIDVendorSuggested

7 Performance Transformation Culture HOW DID WE GET HERE DocumentProsCons Slash sheets, SMDsQualified part, standardization (part, document, qual), etc.Covers military unique. DSCC Drawing – Selected Item, Source Control Standardization (part, document). Requirements can be addedIC Vendors not interested. Commercial Item Descriptions (CID)Standardization (part, document). Off the shelf parts intended for commercial grade applications. Non-government Standards (NGS) Standardization (part, document). Represents industry consensus. No source listing for ICs. NGS development time DSCC Vendor Item Drawings Standardization (part, document). Relies on the vendor part number. Flexible enough to cover enhanced plastics Non-traditional PIN

8 Performance Transformation Culture VID CRITERIA CONTROLLED BASELINE CHANGE NOTIFICATION EXTENDED TEMPERATURE ACCESS TO QUALITY AND RELIABILITY DATA DMS NOTIFICATION AND SUPPORT

9 Performance Transformation Culture TI and National APPROACH SINGLE FAB, ASSEMBLY TEST SITE ENHANCED PRODUCT CHANGE NOTIFICATION OF PROCESS, MATERIALS, ELECTRICAL PERFORMANCE, LEAD FINISH, MOLDING COMPOUNDS AND MANUFACTURING LOCATIONS EXTENDED TEMPERATURE PERFORMANCE ENHANCED PEDIGREE – RELIABILITY AND ELECTRO MIGRATION CHECKS, ELECTRICAL CHARACTERIZATION OVER TEMPERATURE AND CONFIRMATION OF PACKAGE PERFORMANCE OVER TEMPERATURE ENHANCED OBSOLESCENCE MANAGEMENT

10 Performance Transformation Culture MICROCIRCUIT COMPARISION COMMERCIAL – 0°C to 70°C – No reliability data readily available – No Traceability – Multiple sites – Limited DMS Support – Limited Change Notification ENHANCED – -40°C to 85°C, -55°C to 125°C – Quality/Reliability Data – Controlled fab/assembly site(s) – DMS Support and Notification – Change Notification and Revision control FULL MILITARY COMPLIANT DEVICES - -55°C to 125°C- Required DMS Notification - Military Qual/Reliability Data- DSCC Configuration Management - Full Wafer/Assembly Traceability- Required Change Notification

11 Performance Transformation Culture CURRENT SUPPLIERS TEXAS INSTRUMENTS NATIONAL SEMICONDUCTOR FREESCALE (MOTOROLA) - Pursuing INTERNATIONAL RECTIFIER - Pursuing

12 Performance Transformation Culture OTHER INTERESTED PARTIES XILINX ANALOG DEVICES CYPRESS INTEL IDT

13 Performance Transformation Culture VID PROGRAM BENEFITS STANDARD PROCUREMENT DOCUMENT REVISION CONTROL LOWER COST THAN TRADITIONAL MILITARY PARTS IMPROVED RELIABILITY AND CONTROL COMPARED TO TRADITIONAL COMMERCIAL PARTS NEWER TECHNOLOGIES AVAILABLE

14 Performance Transformation Culture PROGRAM STATISTICS CURRENTLY 204 VIDS 357 UNIQUE DEVICE TYPES 402 PART TYPES 17 IN PROCESS 177 AWAITING DATA VIDS CAN BE DOWNLOADED FROM: http://www.dscc.dla.mil/programs/milspec/

15 Performance Transformation Culture OTHER ACTIVITY AEROSPACE QUALIFIED ELECTRONIC COMPONENT DOCUMENT (AQEC) – BASELINE SET OF USER REQUIREMENTS – BEING DEVELOPED BY A CONSORTIUM OF MILITARY USERS AND COMMERCIAL AEROSPACE USERS. GEIA-STD-0002-1 DRAFT REVISION D POINT OF CONTACT JOE CHAPMAN, jvchapy@aol.com (432) 697-9970

16 Performance Transformation Culture FUTURE PLANS CONTINUE TO DEVELOP NEW SOURCES EXPAND PRODUCT OFFERINGS OF ENHANCED DEVICES POSSIBLE REFERENCE OF AQEC DOCUMENT CLOSE AVAILABILITY GAP BETWEEN STATE OF THE ART COMMERCIALLY AVAILABLE AND HIGH RELIABILITY MILITARY PARTS CONTINUED EVOLUTION OF VIDS TO MEET USER NEEDS

17 Performance Transformation Culture SUMMARY STANDARDIZATION OF ENHANCED PLASTIC A CHALLENGE VARIOUS DOCUMENTS TYPES WERE CONSIDERED DSCC VID CONCEPT BEST MEETS USER NEEDS STRONG INDUSTRY SUPPORT OF PROGRAM MAJOR SUCCESS

Download ppt "Performance Transformation Culture STANDARDIZATION OF ENHANCED PLASTIC MICROCIRCUITS FOR MILITARY APPLICATIONS Thomas Hess DSCC Chief, Active Devices Team."

Similar presentations

PRINCIPLES OF A CALIBRATION MANAGEMENT SYSTEM

PRINCIPLES OF A CALIBRATION MANAGEMENT SYSTEM
1 FAA/NASA/Industry Review of Key Characteristics for Composite Material Control Mark Chris, Principal Engineer Bell Helicopter Textron Composite M&P /

1 FAA/NASA/Industry Review of Key Characteristics for Composite Material Control Mark Chris, Principal Engineer Bell Helicopter Textron Composite M&P /
AS9102 First Article Inspection Report

AS9102 First Article Inspection Report
©2006 The Aerospace Corporation Activities Associated With Working With Xilinx to Develop A Space Flow for Virtex Family of FPGA’s Larry Harzstark The.

©2006 The Aerospace Corporation Activities Associated With Working With Xilinx to Develop A Space Flow for Virtex Family of FPGA’s Larry Harzstark The.
UNECE Regulation 13 (braking) Proposed amendment to extend Annex 19 and Annex 20 to cover motor vehicles, especially a vehicle stability function Sheet.

UNECE Regulation 13 (braking) Proposed amendment to extend Annex 19 and Annex 20 to cover motor vehicles, especially a vehicle stability function Sheet.
1 NEMA NEMA Board of Governors November 13, 2004 Report.

1 NEMA NEMA Board of Governors November 13, 2004 Report.
DoD Standardization Conference Lansdowne, Virginia “Aerospace Qualified Electronic Components” Joe Chapman Defense Standardization Program 432-697-9970.

DoD Standardization Conference Lansdowne, Virginia “Aerospace Qualified Electronic Components” Joe Chapman Defense Standardization Program
FIPS 201 Personal Identity Verification For Federal Employees and Contractors National Institute of Standards and Technology Information Technology Laboratory.

FIPS 201 Personal Identity Verification For Federal Employees and Contractors National Institute of Standards and Technology Information Technology Laboratory.
First Article Inspection Report

First Article Inspection Report
Development of ISO standards for AD syringes SIGN Meeting Cambodia, October 2002 Injection technologies G Gerald Verollet.

Development of ISO standards for AD syringes SIGN Meeting Cambodia, October 2002 Injection technologies G Gerald Verollet.
1 Introduction. 2 Design Objectives Integrate with DPMP Acquire parts data from any source Discover sources on Government Portals Transform commercial.

1 Introduction. 2 Design Objectives Integrate with DPMP Acquire parts data from any source Discover sources on Government Portals Transform commercial.
CS 5521 Configuration Management the problem Not a simple task! –Different versions of software usually is in the field during the life cycle –Different.

CS 5521 Configuration Management the problem Not a simple task! –Different versions of software usually is in the field during the life cycle –Different.
Sikorsky A United Technologies Company FAA / NASA Workshop, Chicago, IL – August 6-8, 2002 Review of FAA Material Specification Guidelines Document John.

Sikorsky A United Technologies Company FAA / NASA Workshop, Chicago, IL – August 6-8, 2002 Review of FAA Material Specification Guidelines Document John.
Operations Management Design of Goods and Services Chapter 5

Operations Management Design of Goods and Services Chapter 5
FAA Regulatory Policy for Composite Material Control Presented at 8/8/02 FAA/NASA Workshop (Chicago, IL) Introduction – Importance of stabilizing composite.

FAA Regulatory Policy for Composite Material Control Presented at 8/8/02 FAA/NASA Workshop (Chicago, IL) Introduction – Importance of stabilizing composite.
GSFC EEE Parts Standards Activities Darryl Lakins Head, Parts, Packaging and Assembly Office, GSFC, Code 562.

GSFC EEE Parts Standards Activities Darryl Lakins Head, Parts, Packaging and Assembly Office, GSFC, Code 562.
Traceability Using QAD’s Enterprise Edition

Traceability Using QAD’s Enterprise Edition
First Article Inspection

First Article Inspection
Defense and Aerospace Screening Flows Joe Fabula

Defense and Aerospace Screening Flows Joe Fabula
Avionics Qualified Electronic Component. AQEC – WHAT IS IT ? A cooperative approach to working with the integrated circuit manufacturers to use their.

Avionics Qualified Electronic Component. AQEC – WHAT IS IT ? A cooperative approach to working with the integrated circuit manufacturers to use their.

Similar presentations

Ads by Google