1. 04.04.2007 SB 1 Cables from PP to calorimeters Cabling being done by ITEP-Moscow and IAP-Bucarest team Summary for cables/connectors list, rack wizard by Robert

2. 04.04.2007 SB 2 Cables routing  PP -> fix point -> ECAL  PP -> fix point -> HCAL  HCAL -> fix point -> ECAL  380V + control for power supplies  Power for CWs, pin-diods  Data and TTC optical cables  ECS  SPECS  Radioactive source for HCAL  DSS  Water  Trigger cables

3. 04.04.2007 SB 3

4. 4  Optical cables  few problems identified by Patrick:  Trigger-Data fibers are not tagged  Colour convention problem  to test before installation ?  Trigger cables HCAL -> ECAL  length critical for 6 cables => individual routing  Water cooling: water reservoir still to be produced  Manpower “sharing” with other activities Some details

5. 04.04.2007 SB 5  Minimal cabling for common test (ECAL L3B01 + HCAL L3A03)  380 V + control  Data + trigger optical  Trigger HCAL -> ECAL  SPECS for CROCs, voltage and light distribution boards ECAL+HCAL  Power CWs and LEDs (?), backup: keep power supplies on the calorimeter  Turbines for two racks involved  Connection of two chillers problem: guarding/monitoring the power for chillers and turbines Cabling for common test

6. 04.04.2007 SB 6  C-side rack 1 for ECAL/PS and HCAL rack to be finished on the week of 9/10 (partial DSS, temporary water?)  C-side to be completed on the week of 16/10 (partial DSS, temporary water?)  A-side to start on the week of 16/10  Permanent labels pending Outlook