1. MICDS C AN C HALLENGE 2011 Madison Wrobley and Isabella Kendall

2. P ROCEDURE We started with hot glue gunning three pieces of Styrofoam together to form our box We then put masking tape around the Styrofoam because we had hoped it would provide more insulation We thought using duct tape would help keep the can insulated, so we put it over the masking tape

3. P ROCEDURE We then put foam paper on the inside of the box, which did prove to help with the insulation We wrapped aluminum foil around the can, because from our research, we learned it was a good insulator We had to shave the sides down on the box for it to fit in the 10x10x10 cm wood container

4. P ROCEDURE

7. M ATERIALS

8. P ROCEDURE

12. M ATERIALS