1. TAIL STOCK ASSEMBLY Modeled & Compiled by R.Rajashekar Asst. Professor Department of Mechanical Engineering U.V.C.E, Bangalore-1

2. Dept. of Mech. Engg. U.V.C.E 2 BODY

3. 3 BARREL, CENTRE, FEATHER KEY, FEATHER

4. Dept. of Mech. Engg. U.V.C.E 4 CLAMPING PLATE, HANDLE WHEEL, FLANGE, STUD

5. Dept. of Mech. Engg. U.V.C.E 5 HANDLE, SCREW ROD

6. Dept. of Mech. Engg. U.V.C.E 6 NUT, SQARE HEAD BOLT, WASHER, SCREW

7. Dept. of Mech. Engg. U.V.C.E 7 BARREL WITH BODY

8. Dept. of Mech. Engg. U.V.C.E 8 BODY, BARREL, SCREW ROD, FLANGE,SCREW

9. Dept. of Mech. Engg. U.V.C.E 9 HANDWHEEL WITH KEY

10. Dept. of Mech. Engg. U.V.C.E 10 STUD WITH HANDLE, WASHER & NUT

11. Dept. of Mech. Engg. U.V.C.E 11 CENTRE IN BARREL

12. Dept. of Mech. Engg. U.V.C.E 12 CLAMPING PLATEWITH SQUARE HEAD BOLT & NUT

13. Dept. of Mech. Engg. U.V.C.E 13 ISOMETRIC VIEW OF TAILSTOCK

14. Dept. of Mech. Engg. U.V.C.E 14 ORTHOGRAPHIC VIEWS OF TAIL STOCK