1. Unit 3, Lesson 6 Conducting an Interview Video Shoot AOIT Digital Video and Digital Media

2. Setup begins with the interview location Location preparation: Arrive early enough for setup Pick a quiet spot with good lighting Make sure there is room for the crew and all of the equipment Use an appropriate background Look around our class. If we used this as an interview location, where would the best interview spot be? Why?

3. Positioning the interview subject is key Standard Interview Setup Why isn’t it a good idea to have the interview subject look right into the camera lens?

4. Lighting helps bring out the best image Standard Interview Setup with Three-Point Lighting

5. Audio setup depends on the microphone Which microphone do you think is the best choice for an interview? Why? Built-in camera mic Handheld mic Lavalier Boom mic Radio mic Which microphone will we use?

6. Framing is what you see through the viewfinder Basic Interview Framing and Composition How would you adjust this composition to make it more appealing?

7. Movement adds variety to a shot Interview Zoom: “Medium”

8. A close-up can also be an effective composition Interview Zoom: “Tight” or “Close-up” When do you think it is a good idea to use a close-up shot? When wouldn’t it be a good idea?

9. A few last checks assure a good take All cell phones are off All landline telephones are off All intercoms and hand-held radios are off The camera is set up properly and ready to roll The microphone is well-placed Your interviewer and subject know what to do What else would you check for?

10. Finally: Don’t forget to label your tapes! Your tape label should include: Date Subject Group name Interview project tape # Are you ready for the interview shoot?