Presentation is loading. Please wait.

Presentation is loading. Please wait.

Ballistics 1. Job of Firearms Examiner Analyze bullets/casings to determine the type of weapon used Match bullet/casing to a specific weapon Match bullet/case.

Similar presentations


Presentation on theme: "Ballistics 1. Job of Firearms Examiner Analyze bullets/casings to determine the type of weapon used Match bullet/casing to a specific weapon Match bullet/case."— Presentation transcript:

1 Ballistics 1

2 Job of Firearms Examiner Analyze bullets/casings to determine the type of weapon used Match bullet/casing to a specific weapon Match bullet/case to a sample from another crime Crime scene reconstruction a) distance between muzzle and victim b) bullet trajectory 2

3 Ballistics Ballistics is the science of the travel of a projectile in flight. The flight path of a bullet includes: Travel down the barrel Path through the air Path through a target 3

4 How a gun fires 1.Pull trigger 2.Firing pin strikes a cylinder of primer in the shell of the bullet 3.Explosion pushes bullet through the gun’s barrel 4

5 Types of Guns 1.Handguns a. revolver b. semiautomatic pistols c. machine pistols (automatics) 2.Rifles 3.Shotguns 5

6 Handguns: Revolver Think westerns Cartridge revolves Casing stays in cylinder Limited to six shots More accurate than semiautomatics 6

7 Handguns: Semiautomatic Pistols Loaded using magazine or clip Carry 15-19 rounds Clip is spring loaded Fires once for each pull of the trigger Empty case ejected 7

8 Automatic Weapons (machine pistols) Fire repeatedly as long as the trigger is depressed 8

9 Rifles Use a lever or sliding bolt to eject a spent cartridge and move next one into firing chamber More accurate and shoot more powerful cartridges than handguns 9

10 Comparison of Handgun and Rifle Bullets The metal casing encloses the powder, above which the bullet is seated. The powder is ignited through the flash hole when the primer is struck A case with a rim is found with revolver and lever action rifle cartridges, and also with some bolt action and semi- automatic rifles. 10

11 Shotguns Fire shells filled with pellets (shot) Shot spreads out in circular pattern Have no “rifling” inside the barrel 11 Note: “rifling” are the spiral grooves inside the gun barrel that make the bullets spin.

12 Diagram of a Shotgun Shell At close range, the pellets (shot) act as one mass. The entrance wound would be about 1 inch in diameter and the wound cavity would contain wadding. At intermediate range (4-12 feet) the entrance wound is 2 inches in diameter and individual pellet markings are seen. Most pellets will not penetrate skin beyond 80 yards. 12

13 Intermediate range gunshot wound 13

14 Analyzing Bullets Always handle bullets carefully when collecting from a crime scene A bullet pried from a doorjamb, for example, should be checked for attached paint, fibers, or flesh Bullets removed from a body should be handled with surgical instruments during surgery 14

15 Types of bullets Low velocity – softer High velocity – harder Bullet shape is important in the wounding potential of the bullet 15

16 Lead Bullets Used in small caliber handguns and.22 and.25 caliber rifles They are soft and have less penetration 16

17 Lead Alloy Bullets These lead bullets have other metals added for hardness High velocity 17

18 Semi-Jacketed Bullets Have a thin brass coating Lead nose exposed May have a hollow point 18

19 Full Metal Jackets Completely covered w/ copper They are very high velocity bullets used by the military 45 AUTO, 230 grain full-metal -jacketed bullet. 19..

20 Caliber Refers to the internal diameter of the barrel Measured in inches or mm Ex:.38 handgun –diameter of.38 inches 20

21 Shotgun Gauge Number of lead balls that it takes to weigh one pound Ex. 20 gauge shotgun: 20 lead balls = one pound 21

22 Marks Left on Casings 1. Impression left by firing pin a. center fire (primer in a cup) b. rim-fire (primer around the edge) 2. Breechblock patterns 22

23 Marks left on casing 3. Headstamps- info stamped by manufacturer 4. Extractor and ejector marks on side of casing automatic and semiautomatic weapons extractor: pulls next bullet into place ejector: push spent shell from weapon 23

24 Rifling Rifling refers to the spiral grooves etched inside the barrel They leave marks (striations) on bullets. Lands- high parts Grooves- low parts: Smooth bore rifles (shotguns) have no rifling and are not as accurate 24

25 Different gun types have different characteristics in their rifling. Ex..32 Caliber Colt6 lands and grooves with a left (counterclockwise) twist Ex..32 caliber Smith and Wesson handgun 5 lands and grooves with a right (clockwise) twist. 25

26 Rifling FBI database keeps general rifling characteristic files for all weapons Machine that does the rifling becomes worn with use so each barrel is different 26

27 Rifling Firing of a gun wears down lands and grooves first bullet fired will have different striations than 100th bullet fired To confirm a match you need identical patterns on at least three consecutive striations on each bullet 27

28 Bullet patterns Patterns of Striations on Bullets 28

29 How to Make a Comparison 1.Get an intact bullet from suspect weapon 2.Fire bullet using the suspect weapon into a test firing chamber 3.Compare lab-fired bullet to crime scene bullet using a comparison microscope 29

30 Databases Databases can be used if a suspect weapon is not available for comparison. The databases most commonly used are: IBIS- Integrated Bullet ID system (ATF) can connect two or more cases DRUGFIRE- FBI, focuses more on shell casings An expert makes the final match, not the computer. 30

31 Gunshot Residue (GSR) GSR occurs when gases and particulate matter escape through openings in the weapon and cling to hands, arms, clothing, face, walls, or the victim Pattern affected by wind, rain GSR can aid in distinguishing entrance from exit wounds (entrance will have more GSR) It can also help determine who fired a weapon—since it will appear on the shooter’s hands 31

32 GSR -Gunshot residue Soot on hand of a suicide victim, giving an indication that he was holding the weapon when it was fired 32

33 Griess Test Griess test is used to detect GSR Photographic or acetic acid paper is pressed over the area and soaked in reagent that will show the pattern of GSR Fades in 2 hours Detects byproducts of combustion such as lead, barium, antimony 33

34 Griess test 34

35 Gunshot residue Other testing is done by a swab of the area with filter paper Treat the paper with diphenylamine : ID metals by undergoing a color change. (blue is a positive result) False positives can be caused by: fertilizer, tobacco, cosmetics, urine Need confirmatory testing 35

36 Gunshot residue SEM- (scanning electron microscope) detects tiny GSR particles that have been exposed to high temp, are melted, and deformed 36

37 Determining Distance How GSR affects the wound area varies with the distance from the shooter to the victim Residue pattern on skin or clothing changes w/ distance Generally speaking, the more distance between the shooter and the victim, the wider the spread of GSR 37

38 Determining distance Test by use the suspect weapon on similar fabric at various distances such as: 6 inches, 1 ft, 18 inches, 2 ft, 3 ft Compare to victim’s clothing for match 38

39 Mechanism of ballistic injury 39

40 Gunshot Wounds Gunshot wounds are typically classified as Contact —have soot on the outside of the skin, and muzzle imprint, or laceration of the skin from effects of gases. Intermediate range —show a wide zone of powder stippling, but lack a muzzle imprint and laceration. Distance range —lack powder stippling and usually exhibit a hole roughly the caliber of the projectile fired. 40

41 The upper diagram illustrates the basic differences between the skin appearance of a contact, close (intermediate), and distant (indeterminant) range gunshot wound. The appearance of the wounding characteristics in the skull is shown in the lower diagram in which there is bevelling of the skull outward away from the direction of origin of the bullet. 41

42 Entrance wound on the left Exit wound on the right—vary in size and shape because the bullet can be deformed as it passes through the body. No exit wound means all the bullet’s energy was absorbed by the tissues. 42

43 Gunshot entrance wound to skull—notice heavy soot and radiating fracture lines 43

44 Exit wound No soot or powder, wound is a slit 44

45 Blood spatter Blood collects on hand of shooter 45

46 Terminal ballistics 46

47 Websites http://www.firearmstactical.com/wound.h tm http://www.firearmstactical.com/wound.h tm http://medlib.med.utah.edu/WebPath/TU TORIAL/GUNS/GUNBLST.html http://medlib.med.utah.edu/WebPath/TU TORIAL/GUNS/GUNBLST.html excellent: tons of photos http://www.firearmsid.com/new_index.ht m http://www.firearmsid.com/new_index.ht m http://www.firearmsid.com/Case%20Profi les/FirearmID/FirearmID.htm http://www.firearmsid.com/Case%20Profi les/FirearmID/FirearmID.htm great case studies with photos 47

48 Shot Number 12 shot.05 inchessmallest Number 8 shot Number 4 shot Number 00 shot.33 incheslargest 48


Download ppt "Ballistics 1. Job of Firearms Examiner Analyze bullets/casings to determine the type of weapon used Match bullet/casing to a specific weapon Match bullet/case."

Similar presentations


Ads by Google