1. CDC Merger Liu Shih-Min ; Alan, Teng; C.H. Wang NUU, Taiwan

2. Outline Aurora IPcore files Change Xilinx IPcore to Altera Transmit speed Transceiver difference Test over In test problem

3. Aurora IPcore files ◦./SRC  Aurora protocol core files ◦./example_design  User interface example files

4. File Relations

5. Change Xilinx IPcore to Altera Need remove and replace component ◦ Need remove  I/O buffer ◦ Need replace  FD 、 FDR 、 SRL16...etc.  Transceiver 、 PLL

6. Transmit speed Xilinx : linerate Altera : effective datarate ◦ Transmit how many bit per-second

7. linerate and datarate ◦ Aurora use 8b10b encoder/decoder ， so 8 bits data will use 10 bits space, and datarate will be linrate*0.8. ◦ For example,linerate is 5Gbps the datarate is 5Gbps*0.8 = 4Gbps

8. Transceiver difference Xilinx ◦ transmit and receive use same clock ◦ support Aurora protocol function Altera ◦ transmit and receive use different clock ◦ Support part of Aurora protocol function

9. Xilinx and Altera transceiver structure: transmitter XILINX ALTERA

10. Xilinx and Altera transceiver structure: receiver XILINX ALTERA

11. Test over SP6 Aurora 3.125G in Altera Stratix4 ◦ SP6 Stratix-4 ◦ Virtex6 Stratix-4 VT6 Aurora 3.125G in Altera Stratix4 ◦ VT6 Stratix-4 OK

12. In test VT6 Aurora 5G in Altera Stratix4 ◦ Change IPcore complete ◦ VT6 and Stratix4 transceiver test complete ◦ Loopback is in test ◦ VT6 Stratix4 test is in test

13. Problem in 5G test Altera transceiver can’t setup 5Gbps and 16bit width directly ◦ Successful solve Receive data is incorrect ◦ Successful solve 5G Core on Stratix4 still can’t work ◦ When receive the initial sequence, the core is no responce.

14. THE END