1. Welding Tool ID

2. What to do!  In order to receive all points that you missed, you must have the correct tool next to the name and what it is used for.

3. 1. Metal Band Saw  Used to cut metal

4. 2. Strikers  Used to start the Oxy- fuel machines

5. 3. Arc Gloves  Used for Arc welding  DO NOT GRAB THE METAL WITH THEM!!

6. 4. 6011 Welding Electrode (stick)  Used for Arc welding  Push and pull method  90-105 amps

7. 5. Wire Cutters  Used for cutting wire and filler rod.

8. 6. Torch Body  Used on Oxy-fuel welding and cutting

9. 7. 7018 Welding Electrode (stick)  Used in Arc welding  “Drag” rod  130 amps and higher

10. 8. Oxy-fuel Gloves  Used for Oxy-fuel cutting and welding

11. 9. Tip Cleaners  Used to clean the tips of the torch bodies

12. 10. #5 Shade Lens  Lens used in Plasma cutting and welding, and Oxy-fuel welding and cutting  Can see out of the lens

13. 11. Vice Grips  Used to move metal to the quench tank and to hold metal

14. 12. Oxy-fuel Machine  Uses fuel to weld or cut metal  Oxygen and Acetylene

15. 13. Bench Grinder  Used to clean up metal and take off rust

16. 14. Arc Helmet  Used in Arc welding

17. 15. Slag Hammer  Chipping off slag from the welding electrode

18. 16. #11 Shade Lens  Lens used in Arc helmets and for Arc welding  Can not see out of the lens until the arc is struck

19. 17. Arc Welder  Uses electricity and heat to weld metal together

20. 18. Regulator  Used to show you how much pressure is inside the Oxygen and Acetylene tanks

21. 19. Soap Stone  Used to mark on your metal  Only thing that you can see when welding

22. 20. Stinger  Item that holds the electrode

23. 21. Chop Saw  Used for cutting metal

24. 22. Oxy-fuel Torch  Used to cut metal with gas

25. 23. Plasma Cutter  Used to cut thinner metal and designs

26. 24. C-Clamp  Used to hold metal and pieces down to the table