Download presentation
Presentation is loading. Please wait.
Published byAdele Tate Modified over 9 years ago
1
Magnification showing pads and “bias ring” First Look at SiD Charge Division Sensors at SCIPP
2
Higher Magnification showing apparent “vias” at regular intervals along length of strip
3
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 2nd and 5th Neighbor
4
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 2nd and 5th Neighbor
5
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 2nd and 5th Neighbor
6
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, Guard Ring, and 2nd Neighbor
7
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, Guard Ring, and 2nd Neighbor
8
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, Guard Ring, and 2nd Neighbor
9
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 1st Neighbor
10
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 1st Neighbor
11
September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 1st Neighbor
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.