1. Firearms, Ballistics, & Gunshot Wounds: Part I STEM

3. Firearms Identification Discipline of forensic science which has as its primary concern the examination of bullets, cartridge cases, and other ammunition components to determine if they were fired in/from a specific firearm

4. Forensic Firearms Expert: Questions They Ask Did a suspect use this gun to kill that person? Did these bullets come from that gun? Was it self-defense? Is this a case of suicide, or is foul play involved?

5. Firearms Identification A branch of toolmark examination, which considers: –a harder object marks a softer one and imparts/transfers its microscopic irregularities to that object

6. Firearms Identification Often confused with the term ballistics Ballistics is actually the study of a projectile in motion: –Inside the firearm –After it leaves the barrel of the firearm –When it impacts the target (these last two often deal with trajectory)

7. Bullet & Cartridge Casing Examinations Was a particular bullet or cartridge case fired in/from a specific firearm? –A comparison is made between an evidence bullet or cartridge case to known tests fired from a firearm

8. Typical areas of Identification on Cartridge Cases Breech Face Firing Pin Impression Ejector Marks

9. First, the Class a shell or bullet belongs to is determined (i.e., 9mm or.22 caliber) When class characteristics are identified, the examinations progress to where an attempt is made to identify fired components based on individual characteristics Class Identification of a shell/bullet

10. Individual Characteristics When a firearm is manufactured, the individual parts are made with tools that are in a constant state of change As a result, no two guns will leave the same marks on the ammunition components The marks found on cartridge cases and bullets are sometimes referred to as striations

11. Area of Identification (rifling) on bullet Individual characteristics are located within the rifling impressions on a bullet They’re microscopic striations (or scratches) like those on the bullet below: ExhibitTest Fire

12. Gun Manufacture Videos

13. Gun Type Videos

14. Other Examinations routinely conducted in Firearms Identification Firearm function testing Examination of unfired ammunition Muzzle to target distance determination Restoration of serial numbers and other identification data Toolmark to tool comparisons Bullet trajectory Gunshot residue of hands

15. Firearms: A Quick History Almost every gun is based on the same simple concept: You apply explosive pressure behind a projectile to launch it down a barrel. The earliest & simplest application of this idea is the cannon.

16. The 1 st handheld guns were essentially mini-cannons; you loaded some gunpowder & a steel ball & lit a fuse.

17. War typically resulted in the need for improved weapons technology. In the late 1800’s, the revolver quickly became popular due to it’s size & quick loading. –It only had to be reloaded every 5-6 shots instead of after each shot.

18. Handguns reigned supreme for the past 200 years & to this day, remain the most popular & readily available firearm.

19. Pulling the Trigger Pulling the trigger releases the firing pin… The firing pin strikes the primer… The primer ignites the gun powder… The powder generates gas that propels the bullet forward through the barrel & ejects the spent cartridge case.

23. Caliber: the diameter of the gun barrel. Caliber is recorded in: –hundredths of an inch (.22 &.38) –millimeters (9mm)

24. Bullet Anatomy

25. Anatomy of a Bullet

26. Bullet Comparisons Each gun leaves distinct markings on a bullet passing through it. A gun barrel is made from a solid bar of steel that has been drilled/hallowed out. The drill leaves microscopic marks on the barrel’s inner surface.

27. Bullet Comparisons Gun manufacturers also add spiral grooves to the barrel. This is known as rifling. Lands: the space between the grooves. As a spinning bullet passes through the barrel, it is marked by these grooves.

28. Class Characteristics Class Characteristics: Once a manufacturer chooses a rifling process, for a particular class of weapon, they keep it consistent. Lands & Grooves are the same for a model. –.32 caliber Smith & Wesson has 5 lands & grooves twisting to the right. –.32 caliber Colt has 6 lands & grooves twisting to the left. Class characteristics can eliminate certain makes but are not enough to ID a particular gun.

29. Individual Characteristics Imperfections in the manufacturing process make each barrel unique. Rifled barrels, even if made in succession will NOT have identical striation (scratch- like marks).

30. Bullet Comparisons To match bullets to a gun, test bullets must be fired through a suspect barrel for comparison. Goddard & Comparison Microscopes –Examined bullets side-by-side (to match striated markings).

31. Bullet Comparisons

32. Cartridge Markings All moving components that contact the cartridge rather than the bullet can leave useful impressions on a shell cartridge –Breechface marks –Firing pin impressions –Chamber marks –Extractor & Ejector markings

33. Breechface Marks

36. Actual Breech Marks & Firing Pin Impressions

37. Firing Pin Marks

38. Chamber Marks

39. Ejector Marks

40. Shotguns Smooth barrel (no rifling) –Projectile NOT marked as it passes through Fire small lead balls or pellets contained within a shell. Characterized by: –diameter of the shot –size & shape of the wad –Gauge: diameter of the barrel (  gauge  diameter)

41. SERIAL NUMBER RESTORATION –When a serial number is stamped into a gun, the metal underneath the number is compressed & hardened. –If the number is filed-off, the hardened area may still be present. –By using an acid solution the metal can be slowly eaten away. In this process the softer metal will be eaten away first and the number may reappear.

42. Before & After –Historically, serial numbers are successfully restored 63% of the time on steel & 54% of the time for aluminum or zinc.

43. Make sure it is unloaded!!!!! DO NOT put a pencil into a barrel REVOLVERS Indicate location of fired & unfired ammunition AUTOMATICS Check magazine for number of rounds Fingerprint magazine Place ID tag on trigger guard FIREARMS EVIDENCE COLLECTION

44. AMMUNITION Write on base or nose Package in pill box or envelope Wrap in tissue to protect FIREARMS EVIDENCE COLLECTION

45. CLOTHING Protect & preserve any residue Air dry if wet Package separately in paper bags Establish CHAIN OF CUSTODY FIREARMS EVIDENCE COLLECTION

46. Firearms Database NIBIN - National Integrated Ballistics Information Network Unsolved database for firearms evidence (like AFIS for fingerprints)

47.  DANGER   GRAPHIC IMAGES! Oh My…..

48. Contact Gunshot wound This is a contact gunshot entrance wound. Since the barrel contacts the skin, the gases released by the fired round go into the subcutaneous tissue & cause the star-shaped laceration.

49. Abrasion Ring The abrasion ring, and a very clear muzzle imprint, are seen in this contact range gunshot wound.

50. This is a contact range gunshot entrance wound with grey-black discoloration from the burned powder. Displayed here is an entrance at the left and an exit at the right. Exit wounds vary considerably in size and shape because the bullet can be deformed in its transit through the body. There may be no exit wound at all if the bullet's energy is absorbed by the tissues. Some bullets (such a a "hollowpoint") are designed to deform so that all their energy will be converted to tissue damage and not exit.

51. Powder tattooing is seen in this intermediate range gunshot wound. The actual entrance site is somewhat irregular, because the bullet can tumble in flight.

52. The surface of the skull demonstrates the heavy soot in this contact range entrance wound, as well as radiating fracture lines. The direction of fire was thus toward the back of this picture.

53. With a contact or very close range gunshot wound, it is possible to have blood spatter as well as GSR on the hand of the person firing the weapon. Blood Spatter

54. Trajectory