1. Swing gate automation with articulated arm
391 24V DC
Swing gate automation with articulated arm

2. SWING GATE AUTOMATION 391

3. SWING GATE AUTOMATION 391

4. SWING GATE AUTOMATION 391
DIMENSIONS 185x260x310mm

5. SWING GATE AUTOMATION 391

6. SWING GATE AUTOMATION 391

7. 391 E 391 SWING GATE AUTOMATION 391
Low Voltage (24V DC) Electromechanical automation for swing gates with articulated arm and integrated electronic control board E 391
391
Low Voltage (24V DC) Electromechanical automation for swing gates with articulated arm
NOTE: To operate the second leaf

8. Max. leaf width without electro-lock = 2,0 m
SWING GATE AUTOMATION 391
General features
Max. leaf width without electro-lock = 2,0 m
Max. leaf width with electro-lock = 2,5 m
Max. opening angle = 120°
Adjustable integrated mechanical stops
Main power supply = 230 / 115 Vac
Motor power supply = 24Vdc
Duty Cycle = Residential use (80 cycles/day)
Max torque = 250 Nm
Protection Class = IP44
Irreversible

9. Integrated control board E 391 - Features
SWING GATE AUTOMATION 391
Integrated control board E Features
Electronic control board with basic functions and easy to be programmed with 3 buttons and LED
AP e EP LOGICS (stepped auto/semi-automatic)
Electro-lock management
Self Learning set-up cycle
Speed selectable on 2 levels
Anti wind function
Electronic anti crushing safety (Directive EN12453-EN12445)

10. BUS technology for the connection of the “next generation” accessories

11. Project target To make installation easier (simplyfing wiring)
To reduce installation time (reducing the number of connections)

12. Characteristics
Accessories connection with 2x0,5mmq non polarized cables:
power supply
logical address
Accessories: dip switches to set the function
opening safety
closing safety
opening/closing safety
open command
Self-learning of the connected accessories (push button on the board)

13. “next generation” accessories: 1° step -> photocell XP 15 B
Control board
Photocells
Flashing light
Push button ……
XP 15 B

14. At the moment available with Safebeam case
XP 15 B Specifications:
Self-aligning
Max range 15m
Adjustable support available
At the moment available with Safebeam case
NEW DESIGN IN MARCH 07

15. Integrated multi-code decoding

16. Project target
Integrated decoding in all the new boards -> more competitiveness and installation simplification.
Standardization of the decoding firmware –> easy choice of radio system

17. Characteristics
INTEGRATED MULTI CODE DECODING: DS (dip-switch), LC (Rolling Code) e SLH (self learning hopping code)
TWO CHANNEL DECODING SYSTEM
PLUG FOR FREQUENCY MODULE XF 868 – XF 433

18. SWING GATE AUTOMATION 391
XF 433 RECEIVER
XF 868 RECEIVER

19. SWING GATE AUTOMATION 391
Battery backup unit XBAT 24
In case of power failure, it ensures operations.
XBAT 24 consists in a plastic housing with 20 batteries 1,2V NiMh and charging board inside.
Installation inside the operator.
AVAILABILITY MARCH 07

20. SWING GATE AUTOMATION 391 AVAILABILITY JUNE 07
KEY PUSH-BUTTON WITH RELEASE SYSTEM (ARMOURED)
AVAILABILITY JUNE 07